What engines are compatible with exhaust?
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 10
Likes: 0
What engines are compatible with exhaust?
I have a 90 camaro RS with a 305 TBI. I am looking to put a 350 carb in it, but I already have an exhaust. I need to know what will fit it and how dificult it is to swap a tbi to carb. I have Hooker 2055HKR Super Comp headers, Catco 6907 catalytic converter, and Flowmaster 17233 catback exhaust system. I also want to convert the 700r4 to a 5speed trany. Thanks for helping.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
There are very few non-LSx factory 350 heads that 2055HKR's won't fit. And, it would be a fair bet that any production small block Chevy head will mount your headers just fine.
You shouldn't have any problems.
EFI to carb - there's a tech article on the topic linked from the thirdgen.org homepage. Not particularly difficult, depending upon your level of mechanical and electrical ability.
There are very few non-LSx factory 350 heads that 2055HKR's won't fit. And, it would be a fair bet that any production small block Chevy head will mount your headers just fine.
You shouldn't have any problems.
EFI to carb - there's a tech article on the topic linked from the thirdgen.org homepage. Not particularly difficult, depending upon your level of mechanical and electrical ability.
Thread
Thread Starter
Forum
Replies
Last Post