edelbrock performer
Thread Starter
Member
Joined: Aug 2008
Posts: 142
Likes: 2
From: Belleville, Ontario
Car: 1986 Chevrolet Camaro
Engine: 355 chevy
Transmission: t-5
Axle/Gears: 3.73 disc brakes
edelbrock performer
stupid quiestion but im gonna ask anyways, i have an old oldsmobile sb edelbrock intake, but before the performer, and here is the stupid part, will it work on a sbc with centerbolt heads? like will the porting match up i figure i would have to redrill some holes n such but i dont wanna pull my intake off my car to figure out
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The ports will match up.
The only issue is the center two intake mount bolts on each head are at 72 degrees instead of 90 degrees like the rest on center bolt valve cover heads. You can modify those bolt holes on the intake to fit the heads.
Or, you can buy an '87-up Performer intake manifold.
The only issue is the center two intake mount bolts on each head are at 72 degrees instead of 90 degrees like the rest on center bolt valve cover heads. You can modify those bolt holes on the intake to fit the heads.
Or, you can buy an '87-up Performer intake manifold.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
Oct 5, 2015 06:23 PM
efiguy
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 27, 2015 01:30 PM
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 25, 2015 04:47 AM