New distributor
Thread Starter
Junior Member
Joined: Aug 2001
Posts: 7
Likes: 0
From: Reseda Ca 91335
New distributor
I just rebuilt my 2.8L and was inquiring how to install the distributor. Forgot to mark the damn thing. Pretty sure its a HVS, it has a 3 prong harness along with another separate harness. Thanks
TOm
TOm
Junior Member
Joined: Apr 2001
Posts: 37
Likes: 0
put the timing mark on the crank pully to 0Degrees or tdc and install the distrubter with rotor pointing to the #1 cylender on the cap.
------------------
84 Z28
78,000 miles
1970 350 ci 4 bolt chevy motor punched .030 over to a 355
stock 1970 heads with 1.94's and very mild porting
edelbrock rpm cam,intake, 750 4barrel
weisco 9.6/1 pistons & rings
edelbrock headers and catback (without the cat)
700r4 trans
3.23 rear (no posi yet)
------------------
84 Z28
78,000 miles
1970 350 ci 4 bolt chevy motor punched .030 over to a 355
stock 1970 heads with 1.94's and very mild porting
edelbrock rpm cam,intake, 750 4barrel
weisco 9.6/1 pistons & rings
edelbrock headers and catback (without the cat)
700r4 trans
3.23 rear (no posi yet)
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM
