305TPI to a crate engine 350
Thread Starter
Junior Member
Joined: Oct 2001
Posts: 2
Likes: 0
From: Whitehall Pa USA
305TPI to a crate engine 350
I have 85' Transam with a 305Tpi and i would like to put a crate engine from GM performance parts it is the 350ci-HO 330hp 380ft/lbs with the vortec heads. The question is would i be able to use my TPI system on it? And what should i do about my computer system should i just upgrade my chip from a 350 Transam into it. Any help possable is needed. Thanks for the time
Member
Joined: Dec 2000
Posts: 146
Likes: 0
From: tulsa, OK,USA
Car: 77 Corvette
Engine: ZZ3/nitrous
Transmission: THM 400
Well,
Just for starters, you will need the Scroggin Dickey Vortec base to mate with the cylinder heads, ditch the 19# injectors for 22#, use a 350 or custom PROM.
Cheers
Richard
Just for starters, you will need the Scroggin Dickey Vortec base to mate with the cylinder heads, ditch the 19# injectors for 22#, use a 350 or custom PROM.
Cheers
Richard
Junior Member
Joined: Feb 2001
Posts: 10
Likes: 0
From: South Carolina
hey, i came here to post the same exact thing. 
how ironic...
anyways, is there anything else that we would need to know aboutthis particular swap (305 TPI to a 350 HO)?? i am seriously considering buying one when i get my settlement money from the wreck i was in back in May.
Ryane
1991 Z
how ironic...anyways, is there anything else that we would need to know aboutthis particular swap (305 TPI to a 350 HO)?? i am seriously considering buying one when i get my settlement money from the wreck i was in back in May.
Ryane
1991 Z
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Sep 17, 2020 08:26 AM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
