Dont know what to do !!!
06-08-2010, 02:04 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Dont know what to do !!!
I am currently swapping out the 2.8 v6 and going to a 350 carb setup, i was wondering with the wiring what do i need to keep if any ?? i did a search but came up with nothing, if you can help i would appreciate it
06-08-2010, 07:59 AM
#2
On Probation
Join Date: Oct 2008
Location: Northern Utah
Posts: 6,319
Likes: 0
Received 17 Likes
on
17 Posts
Car: seeking '90.5-'92 'bird hardtop
Engine: several
Transmission: none
Axle/Gears: none
Re: Dont know what to do !!!
The main engine connections are the starter, the alternator and the coil. Most of the rest is now useless.
06-08-2010, 01:58 PM
#3
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Along with engine temp and oil pressure and tach.
The stuff you won't be using goes to the computer via the passenger side fender well, and can be removed in one piece.
The stuff you won't be using goes to the computer via the passenger side fender well, and can be removed in one piece.
06-08-2010, 02:03 PM
#4
Supreme Member
iTrader: (10)
Join Date: Oct 2007
Location: Fl.
Posts: 1,881
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: Dont know what to do !!!
I think that depends on the year of the car. My camaros' harness is one piece, the computer wiring being taped together with the wiring coming from the driver side as well.
06-08-2010, 02:04 PM
#5
Supreme Member
Re: Dont know what to do !!!
What five7 said. Also be sure to cover the hole left where the harness passes through the body to keep water and unwanted guests out. I used a plate I made from aluminum.
06-08-2010, 02:09 PM
#6
On Probation
Join Date: Oct 2008
Location: Northern Utah
Posts: 6,319
Likes: 0
Received 17 Likes
on
17 Posts
Car: seeking '90.5-'92 'bird hardtop
Engine: several
Transmission: none
Axle/Gears: none
Re: Dont know what to do !!!
The V6 tach is now useless, and the V8 will run without a tach, or a temp gauge, or an oil pressure gauge. And it being a base model, they're probably useless idiot lights instead of useful gauges anyway.