can someone help me out? West springfield mass area

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2010 | 06:10 PM

bondodude86

Thread Starter

Junior Member

Joined: May 2009

Posts: 23

Likes: 0

From: Western Mass

Car: 1992 Chevy Camaro

Engine: 5.0

Transmission: 700R4

can someone help me out? West springfield mass area

hello to whom ever reads this..

SO I am swapping my 92 RS 305 TBI to a 350 Carbed ..I have gotten the old motor out, and the 350 is in and bolted to the mounts, All I really have left to do is bell housing bolts, wiring and the accessory brackets...just small odds and ends....If anyone lives in the area and bit of help getting this done is wicked wicked appreciated

My problem is the Wiring...I just had the trans rebuilt about 100 miles ago and its done professionally...Personally do not know how to keep the electronic trans run by the ECM but have the engine itself be carbed...My number is 413-657-6025...please feel free to call or text me...

Jul 23, 2010 | 06:40 PM

Atilla the Fun

On Probation

Joined: Oct 2008

Posts: 6,319

Likes: 19

From: Northern Utah

Car: seeking '90.5-'92 'bird hardtop

Engine: several

Transmission: none

Axle/Gears: none

Re: can someone help me out? West springfield mass area

You don't need the computer at all. There are at least 5 good alternatives, and I've tried them all. If you have a big nasty cam, B&M's lockup kit is good. If you have something like a COMP XE268, Then TCI's lockup kit is best. And if you're running a near-stock cam, the Painless Wiring lockup kit is best.