probably the same ol question...tbi to tpi

Reply Subscribe

Thread Tools

Search this Thread

Sep 9, 2010 | 04:33 PM

fcarpenter

Thread Starter

Junior Member

Joined: Jan 2010

Posts: 23

Likes: 0

probably the same ol question...tbi to tpi

ok, i've searched but cant find what im looking for so here goes..i have a 91 rs 305 tbi..want to swap with 350 tpi..donor motor is long block with intake..has tpi system including sensors/maf/ecm/harness...my question is..what else will i need for this conversion...any input is greatly appreciated.

Last edited by fcarpenter; Sep 9, 2010 at 05:12 PM. Reason: added info....the tpi engine is from an 87 bird

Sep 9, 2010 | 05:59 PM

BluFBdy

Supreme Member

iTrader: (1)

Joined: Sep 2007

Posts: 2,179

Likes: 1

From: Port Orchard,WA

Car: 89 Camaro RS

Engine: 355 SD TPI

Transmission: WCT5

Axle/Gears: 3.08 Posi

Re: probably the same ol question...tbi to tpi

just make sure youve got the complete setup, and then swap the harness with the donor one, its pretty cut and dry, i think you MIGHT need a different flywheel if its a manual, flexplates should swap over, if you can get it with the motor id do it