Hey guys I have a 1984 camaro that I am changing over to carburated and I am gonna use as a track car and occasionally a cruise down the road. I am wanting to remove all the wireing that was there from the fuel injection and looking for some advice on how to do so or maybe a wireing diagram that shows what I can take out. And any other tips to clean up the engine compartment any advice is very appreciated thanks

 

CFI

 

if so here is the schematic
hth

 

Cfi?? I just wanna get to the bare minimum as far as wires and stuff go but not real sure what to remove

 

cfi =Cross Fire Injection , If you are going to a carb you will need a fpr. all the fi wiring can go you will just be left with the charging system, starter wire and power wire to the distributor and tach wire if equipped.