383 tpi build 85 iroc t-top
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 37
Likes: 0
From: Omaha Nebraska
Car: 85 iroc tpi t-top
Engine: 383 tpi
Transmission: built 700r4
Axle/Gears: 4.56
383 tpi build 85 iroc t-top
Stock 350 tpi outta 89 camaro. $150
Machine shop bored .30 line bored tanked ect. Total $536
383 Stoker kit 749.00
Corvette heads 58cc valve covers. 1000
An still going. Lol
Car has built 700r4 an 4.56 gears
What should I do for injectors?
Machine shop bored .30 line bored tanked ect. Total $536
383 Stoker kit 749.00
Corvette heads 58cc valve covers. 1000
An still going. Lol
Car has built 700r4 an 4.56 gears
What should I do for injectors?
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
26 or 28 lb/hr.
Mind if I make a couple of suggestions on your build?
Wrong heads. Poor flowing. 58cc chambers will yield 12:1 compression ratio, way too high. You need more like 72cc chambers.
http://www.summitracing.com/parts/dr...make/chevrolet
Much better choice all around. About the same price.
And, TPI will choke that poor engine. Holley Stealth Ram is in order. http://www.summitracing.com/parts/wnd-7540/overview/ (Assuming you're keeping TPI on it)
Mind if I make a couple of suggestions on your build?
Wrong heads. Poor flowing. 58cc chambers will yield 12:1 compression ratio, way too high. You need more like 72cc chambers.
http://www.summitracing.com/parts/dr...make/chevrolet
Much better choice all around. About the same price.
And, TPI will choke that poor engine. Holley Stealth Ram is in order. http://www.summitracing.com/parts/wnd-7540/overview/ (Assuming you're keeping TPI on it)
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 37
Likes: 0
From: Omaha Nebraska
Car: 85 iroc tpi t-top
Engine: 383 tpi
Transmission: built 700r4
Axle/Gears: 4.56
Re: 383 tpi build 85 iroc t-top
Sorry. There 68 cc l98 I was looking at the wrong one's
An I was wanting to keep it tpi.
An I was wanting to keep it tpi.
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 37
Likes: 0
From: Omaha Nebraska
Car: 85 iroc tpi t-top
Engine: 383 tpi
Transmission: built 700r4
Axle/Gears: 4.56
Re: 383 tpi build 85 iroc t-top
I ordered the roller rockers, pushrods, an the stealth ram intake.. Would this intake work with my l98 aluminum heads tho??? An what are my options for a cam I wanna big cam but wanna stay inside my parameters so my computer ain't getn mind **** when it's running. Any suggestions
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 37
Likes: 0
From: Omaha Nebraska
Car: 85 iroc tpi t-top
Engine: 383 tpi
Transmission: built 700r4
Axle/Gears: 4.56
Re: 383 tpi build 85 iroc t-top
I ordered the roller rockers, pushrods, an the stealth ram intake.. Would this intake work with my l98 aluminum heads tho??? An what are my options for a cam I wanna big cam but wanna stay inside my parameters so my computer ain't getn mind **** when it's running. Any suggestions
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM