Best long tubes for lt1 swap ??
11-27-2017, 06:51 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2017
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Best long tubes for lt1 swap ??
hi so i still haven't found any LT headers for the lt1 swap that would work decently .. and of course headers are not cheap i was wondering if anyone knows of a pair of headers that are that will work.. thanks !
11-28-2017, 08:07 PM
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,030
Received 1,664 Likes
on
1,262 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Best long tubes for lt1 swap ??
The LT1 is a small block Chevy. Any SBC headers for our cars will work.
As far as which are "better", that's an open question. Some are pretty crappy in one way or another, and AFAIK none are what I would consider "ideal". It comes down to, what level of grief you're willing to deal with.
If there is ANY ONE property of headers that is to be avoided, it is "cheeeeeeep". Life is just entirely too short for that. Leave that word OUT OF your vocabulary. Remember, you get, AT BEST, what you pay for; so, if you pay the least, you get, AT BEST, .... ,, you finish the math.
As far as which are "better", that's an open question. Some are pretty crappy in one way or another, and AFAIK none are what I would consider "ideal". It comes down to, what level of grief you're willing to deal with.
If there is ANY ONE property of headers that is to be avoided, it is "cheeeeeeep". Life is just entirely too short for that. Leave that word OUT OF your vocabulary. Remember, you get, AT BEST, what you pay for; so, if you pay the least, you get, AT BEST, .... ,, you finish the math.