I have a 305 TBI and my dynomax super turbo gives it that nice rumble, but loud.

I am just wondering what yall have:
1.size of pipes
2.type of muffler
3.exhaust tips.

just curious.

Does anyone wake up the neiborhood when you get or leave home in the morning?

Do you have to wear earplugs?

Anyone have been stoped because of a too loud of exhaust?

 

i was backing out of my parking spot in my apartments. and the way the parking lot is designed, there is parking of both sides, so i back up right next to this truck, and set off the alarm on accident. oops. mine isn't as loud as it is LOW!!! so low that basicaly you can't hear it, u know like having subs in ur car and its louder further away u get.. thats kinda how my exhaust is, but i wish i had true duals to give me the sound i really want. but theres probably alot of guys here with LOuder exhaust then me.

------------------
- David
88' GTA 5.7L TPI MODS---> air foil, K&N, Shift Kit, 180* therm, TB bypass, Gutted CAT, Flowmaster 80 Series

 

My friends modifed 96 Z28 is so loud that the Constable had to personally talk to him and tell him to put silencers or he will get a citation. He has B&M headers. and Borla cat-back. Every week he breaks the trans,at least once.

 

LOL. Straight pipes on mine.

------------------
1992 Camaro Z-28 custom 25th anniversary, 5.7 TPI auto, 2.73 posi, t-tops, arctic white with 92' medium mettalic gray stripes with black border stripe.

1967 Pontiac Catalina 2 door fastback, 400 v-8, auto, cameo white, dark red interior

 

I set off car alarms all day long

------------------
'82 Z28
LG4 305 .030 over, performer intake, holley street avenger 670, xe 256 cam, tes headers, 3 inch single exhaust, spintech muffler, 14 x 3 inch drop base k&n.

 

I think I won this pole. I've got 1 3/4" headers into a 3" pipe, then a 3" glasspack that runs along the driveshaft tunnel. With the cam I have, at idle, it's pretty f***ing wild. I'm putting my new Pace Setter catback on tomarrow. My old dual 2 1/4" staight pipes were loud as sh*t too. But that was when I had the 305. A cop heard me go by and he gave me a ticket for no muffler.

------------------
92 RS carb'd 350 5-speed

 

305 TPI stock. i have custome made 3" mandrel bent exaust from the Y back.. no cat, V-force muffler and 3 1/2 inch boom tubes.. I've set off alarms, got pulled over for the noise during the middle of the day and you can hear me from 3 miles away if i've got her wide open...
i'm going to put a cat or something in to quiet her down over the winter

------------------
87 formula
LB9, Automatic
K&N
3" catback v-force muffler
Hypertech preformance chip

 

I like mine. Not hella loud, just rumbly unless I go WOT. Then its loud and deep but not HELLLLLLA Loud. Just the way I like it

------------------
1988 Jet Black IROC
5.7L W/ 64000 miles
Flowmaster Exhaust
Fully Loaded
------------------

My IROC In Readers Rides
My IROC

[This message has been edited by IROCThe5.7L (edited September 27, 2001).]

 

i know for a fact my car is the loudest.
you cant hear my music only the subs...
you cant talk in the car. at all.
whenever there are parked cars around me...alarms go off. EVERYDAY.
neighbors have complained. left notes on my car, knocked on my door.
ive been pulled over, cited.

setup: hooker long tubes 1 3/4
Mufflex 3" y pipe
Thats all

 

WOW. I can not imagine. Yall guys are cool.

this rustang that came from a racing shop called "Ford Racing," was rev. like a *****.trying to show off his exhaust when he looked at my 'bird.

I had my windows down.Loud stereo. and nothing.that dual exhaust was loud. he had a sticker saying "Mustang GT 5.6," obviosly he had the 351W.

then a cop heard the exhaust and came rushing in.I was laughing when he got a citataion.

 

mine is very loud when I open my cutout. Although it doesnt sound too attractive, but its loud as crap.

It dumps right after my headers.

------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock TES Headers, Exhaust cutout, Edlebrock open element, 160 degree T-stat, Hurst Dual Gate shifter, Lakeland LCA's, and a Stage 2 FastChip.

2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from http://www.MrMikes.com

 

I just put my new catback on so my car isn't quite as loud now. It still screams though.

------------------
92 RS carb'd 350 5-speed T-tops
Holley double pumper, 3.73's, and a massive cam

 

I definitely like the sound of my cut-out. If I had dual exhaust, and cut-outs, it would sound worse. Like a roundy-round car. I think it's because all 8 exhaust pulses are coming from the same spot, it sounds less like a poor running Harley (like there's any other kind ).
Of course, get on it, and people's heads swing like they're on swivels.
BTW my 3" cut-out is before the cat.

------------------
No guts, no glory.

 

My setup is certainly not the loudest of the bunch. It rumbles pretty quiet at idle, has that sweet sound between 1500 - 2500 rmps, and definitely gets attention at WOT.

It suits me just fine!

------------------
92 Camaro RS, LO3, 5-spd, T-tops

Performance:
K&N Open Air Filter, Edelbrock performer TBI intake, Fastchip Prom, Timing +4 degrees, Centerforce clutch, Xact 8mm wires, SLP 1 3/4" Headers (coated), Flowmaster Catback Exhaust, Z28 Grille w/aftmkt fog lamps, MacEwen white-face guages
Electronics:
Alpine 8030 Alarm System, Valentine One Radar Detector (How did I ever drive without one?), Pioneer DEH 7450 Head Unit w/6-pack CD changer, Pioneer DEQ 7600 Sound Processor, 2 Kenwood KAC-846 Amps powering 2 12" Pro Red subs, 2 Pioneer 6x9 and 2 MTX 4x6 speakers.
NEXT UP: TBI mods, 3.42 gears w/Torsen posi

 

last time i checked a 351 was a 5.8L
and there was also a 351C too

 

2 3/4 inch pipe
80 series flowmaster
Custom turndowns

------------------
Steve
88 Firebird TBI(WS6),TH700R4 - Open Element, Catco 2 1/2 High Flow Cat, K&N filter 14*4 element, American Thunder Flowmaster Catback Exhaust, 180 Stant thermostat, Accel cap and rotor, L98 cam

 

Interesting, Black Beauty, all that time i thought they were 5.6. Thats wiered on that Mustang has "5.6" I wonder whats the displacement. It was hella loud.

 

Actually except for the open headers dood, I can take anyone!!!! I have edlebrock headers to the Y pipe with a 3 inch extension into a "1" Chamber yes not 2 not 3 "1" chamber 6inch long race muffler by flowmaster!!


Got ya bagged Racing

 

Edelbrock headers, 3" cat, borla open exhaust. Its very loud.

 

maybe it was a 302 with a 351 crank, this is a pretty popular stroker combo, comes out to 347 cui.

oh and the exhaust i have is pretty loud, nice tone and a fair rumble, and i can set off car alarms with it, but when i put the headers dual 3-inch pipes and the monster cammed 400 in im sure i will not be able to keep the boys in blue off my back..

------------------
87 IROC-z 305 TPI
Borg Warner T-5 fresh rebuild
10-bolt 3.73 Richmond gears rebuilt GM posi,
Ported Plenum and Runners Homemade AFPR
ACCEL 8.8 wires, High output coil,and cap & rotor
Bosch platinum + 4 plugs
Ram Air w/ K&N filters,
MAF sensor screens removed, TB coolant bypass
Polyurethane tranny and torque arm mounts
Dynomax catback w/custom tips
K&N oil filter,Mobil 1 synth, Futura GLS Super Sport tires 265/50/15 rear and 235/60/15 front mounted on 86 monte carlo SS rims ,

400 sbc and a 6 spd in the works

 

Do you think the guys in Blue would even be able to hear anymore?Think about it, your loud exhaust.them being behind your back alll the time!! I think they just will try get as far as possible.

Does anybody at least respect the elderly's home?

Does anyone drive thru a "deaf" area as loud as possible?

 

Ok guys instead of just listing whatcha got, make recordings!

Jess

 

Actually that would still be a 351 (Windsor, Cleveland). The 302 (4.9L) Ford is a 4.00" bore by 3.00" stroke engine, and the 351 (5.8L) is a 4.00" bore by 3.50" stroke. The 347 (which is 5.6L) is a 302 (4.03" bore) with a 3.40" stroke.

As for the loudest exhaust, try 1-3/4" SLPs with a straight pipe, 4" mufflex with a Flowmaster my arm fits through.

------------------
George P. Lara
1984 Z28
2001 SS #0391
SCCA, SCFB, SC3GFB, SSOA #M01-0391

 

no mine is hella loud. i have a high 526 lift cam in my 350 with no exhaust just the headers and damn thats loud. i was starting it in my garage and bustedout my bedroom window. now thats loud. then again i did floor it to warm it up which busted the window but still

 

This might seem weird but the Grand Prix is going to be in Downtown Houston. While I was going to school, I heard this wiered loud noise, i was in Downtown. For a second i thought there were at least 13000 vacuume cleaners turned on. As i went towards the noise...The Grand Prix cars were practicing, i guess. Those little engines sure sound loud.

Just out of curisity...Does anyone know what the type of exhaust those little cars have?

 

How about no exhaust? I thought race cars just straight piped it. I don't know as a matter of fact though... I think I've got a pretty loud exhaust. It's as loud as my friends Mustang GT and that has exhaust leaks all over, and it's got true duals... All I have is stock exhaust with a gutted cat. Some of the noise is probably from intake...

------------------
1984 Firebird - Daily driver, 305 LG4, T5 - Hurst short shifter, Edelbrock 600 CFM Performer Carb + Intake - Edelbrock Pro-Flow air filter, gutted cat, IROC 16x8 Wheels, AIWA bargain basement (from Sears of course) CD player, Eight-ball shift ****
Check out my ride here - My $1300 Toy

"IT'S SNOWING! TO THE HIGH SCHOOL PARKING LOT!" - The Mustang and Firebird face off in the dead of winter.

 

i have SLP 1-3/4" headers, a 3" hollow cat (haha) and a 2-3/4" intermediate pipe feeding into a flowmaster 40 series muffler. it is pretty damn loud when i step on it, but at idle its not too bad. i could set off car alarms like 2 houses down if i wanated to. its the muffler though..the 40 series is the loudest street flowmaster you can get.

-Brian

------------------
1991 Camaro RS - ultra blue metallic, t-tops
GMPP 350 HO crate engine - 454 TBI, MSD ignition, SLP exhaust, everything is new
700R4 - 2,400 stall converter, vette servo, shift kit
z28boy.cz28.com
Central New York F-Body Association
z28boy@twcny.rr.com AIM - "Z28 Boy"
1998 Pontiac Grand Prix GT - 2 door, black

 

With the headers the exhaust is loud..but I'm opting for a Hooker Aerochamber muffler now. Just gonna do that; I was originally going to yank the cat but now I'm going to just get a Dynomax high-flow one (got one cheap) so...

------------------
1992 Camaro RS (Auto) 5.0L TBI
-
Performance mods
NOS (125 HP shot)
Dynomax cat-back exhaust
Hedman headers
K & N open element/ X-Stream lid
MSD 6A ignition
MSD 8.5mm plug wires
LT1 camshaft
Soon to be installed:
Edelbrock intake manifold
B & M 2400 RPM stall torque converter
Trans Go shift kit
World Products Torquer heads

Audio
Sony Xplod CDX-M610 head unit
Pioneer 2-way 4x6 front speakers
Pioneer 3-way 6x9 rear speakers
12 inch Pioneer VCCS PRO subwoofer
QLogic sealed box
Kicker ZR360 amplifier
Lightning Audio 1 farad capacitor

Other
Macewen White Faced Gauges/Shift overlay
A-pillar gauges (Phantom oil pressure, Air/Fuel)
180* thermostat
Window Tint

 

Had a cop pull me over in traffic and give me a $86 doller noise violation ticket and he said that he was was about six or seven cars ahead of me when he finally had enough and decide to pull over and wait for me. I think I probably could have gotten myself out of the fine, but I dont think he was to impressed when he asked me if I was going def from from all that noise and i replied "huh".
I've got edelbrock 1 5/8 headers, 3" cat replacement pipe(custom made), flowmaster catback and I wouldn't have it any other way or it would probably anoy the sh*t out of me.

[This message has been edited by TA88GTA (edited October 10, 2001).]

 

I know I sound like an old man here but is there any reason besides getting attention (good or bad?) for having a loud *** exhaust. I hate to say it but it's like cranking up your stereo nobody outside the car is going to appreciate it. As a matter of fact I once bet my friend 50 bucks that 7 out of 10 people think his car sounds like **** (he has a 355cu. tfs heads, slp headers, flowmaster catback w/cutout, and a big cam) and I won. I mean don't you guys think that civic (you know the one) with the loud *** exhaust is annoying? And don't tell me it's for power because there is no reason to run open headers or a cutoff on the street.

[This message has been edited by evilho7810 (edited October 10, 2001).]

 

Hellllllllllla Loud (Like heard 7 blocks away loud)I dont like.


Loud growling mean exhaust = Love it

Loud is good as long as it has some nice tone behind it.

------------------
1988 Jet Black IROC
5.7L W/ 64000 miles
Flowmaster Exhaust
Fully Loaded
------------------

My IROC In Readers Rides
My IROC

 

i got a friend who has a 86 mercury station wagon, well the pipe inbetween his manifold and cat rusted off, his car is louder than hell when he redlines it, my car is not loud, yet

------------------
Trent
---Car---
89 Firebird
305 L03 TBI A4
t-tops
Open Element Edelbrock Aircleaner w/ K&N air filter
Summit Chrome Valve Covers

---Stero---
Pioneer DEH-P730 Premium
Infinity 2way 4652 4x6's
Pioneer 4way ts-a6985 6x9's
profile cl640 110x4

Future:im profile 1200sx 900watt x 1, and a pioneer cdx-p1270 12 disk cd changer

 

3"piping from the y-pipr back into a very broken 40 series flowmaster muffler,with 3 1/2 by 18" long crhome tips it is very loud,my friends say if they can hear me enter the neigborhood a few blocks away ,I haven't been pulled over because of the noise,but my favorite is cruising around crowded parking lots in first gear,I have little kids that yell wow,and oh my *** ,once when I was at a gas station I was parked idling and a 10-11 year old said,wow nowthats an engine...Of course when your loud as **** and you drive a clean *** bright yellow tinted IROCZ I guess you're going to get some attention

------------------
86 IROCZ 5.0 TPI/"new" 700R4 auto with transgo shift kit and vette servo,canary yellow,t-tops,radar detector,tan interior,hidden antenna,tinted windows,taillight blackouts,front end bra,k&n air filters,no cat,full 3" racing exhaust with 40 series flowmaster and chrome tips,2:73 posi rear(soon to be 3:42 or 3:73 posi),1989 IROCZ 16*8 polished aluminum rims

 

5.6 mustang is probably a stroked 5.0, 347 ci or 357 ci depending on the crank.

 

my car issooooo loud 2001 ss's think twice about racing me even though my car isnt all that fast... i have set off every car alarm ever made..... and when iget on it u can hear me from like 5 blocks away... and the cutout is befor the bend for the axle on the back and all i got is headers and a cam.

------------------
305, TPI,compucam 2030 cam, air foil, 8.8 wires, accel super coil, dynomax headers, custom y-pipe, cut out, 80 series flowmaster, 2.73's and an open diff(3.42-3.73 on the way). and a stage 4 chip :0). hittin a sad 15.2 before the chip.

 

goto this link from my web page and download the wav file of my exhaust...

http://z28boy.cz28.com/sounds.htm

its 1-3/4" SLP headers, no cat, 2-3/4" intermediate pipe, and a flowmaster 40 series muffler.

-Brian

------------------
1991 Camaro RS
GMPP 350 HO crate engine - 454 TBI, MSD ignition, SLP exhaust, everything is new
700R4 - 2,400 stall converter, vette servo, shift kit
My car's webpage - z28boy.cz28.com
President - Central New York F-Body Association
Email - z28boy@twcny.rr.com
AIM - "Z28 Boy"



[This message has been edited by Z28 Boy (edited October 16, 2001).]

[This message has been edited by Z28 Boy (edited October 16, 2001).]

[This message has been edited by Z28 Boy (edited October 16, 2001).]

 

Modified y-pipe to NO cat to 4inch mufflex to a spintech muffler with ahideaway tip that pointsto the ground andresonates off of the ground... My car is so loud, i can take it to a parkade and set off over 9 alarms at once with a mild rev... Im not willing to lose all hearing so i dont take it up past 3

 

I think mine is pretty loud. I have Edelbrock TES Headers 1-5/8 primaries, w/ 3" collector, 3" straight pipe for my cat and a custom 3" exhaust w/ a flowmaster 80 series 3" in and dual 2.5" out. This is what it sounds like.

http://members.aol.com/j007golden/Exaust1.wav

------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html

 

Haha, i like Brian's sound wav. I can even hear him getting in and out of the car. Don't forget to set ur car alarm.

------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html

 

My dad has a modified dirt track car with a 406 and that thing sure is loud. It sounds sweet as hell, but it runs off alcohol so when you get close it starts burning your eyes and choking you and stuff.

------------------
Teal Green 91 Camaro RS
305, Automatic Tranny
Stock for now

 

My 92 is stock, so it isn't that loud, but my 75 is loud as hell. Pontiac 350, Dynomax headers, straight pipes about 2.5' long before they turn and dump out the sides. When we get the big cam in it and bump the compression a little it will be louder, but it is very loud now. We start it in the garage and rev it up and things fall off the shelves. Every time I start it my neighbors come over to check the progress on it because they know I'm working on it. *** , I love that car.

------------------
1975 Firebird - Pontiac 350, TH350, 27k original miles, rustbucket, ongoing resto project

1992 Firebird - 305 TBI, 700R4, sport appearance package, t-tops, flaming red, 84k miles, soon to be modified

 

355, 10.5:1 compression, Big Cam (248/254 @ .50 with .545/.565 lift), TFS G2 Heads, Full lenght headers, Dual 3in pipe with Flow tech afterburner mufflers (loud as 40 series). Sounds cool at idle but even better up around 6750 RPM's. It has honestly set off a car alarm about 2.5 blocks away just leaving a stop sign normal.

------------------
Black 89 IROC...355, Solid Crower Cam, TFS heads.
12.0 @ 120.3mph with a 1.9 60ft...all motor

 

Yeah, the 351 is listed as 5.8L. The 351W is a very sweet engine--I have it in a Shelby Cobra replica I just finished. 2 things about that car:

1)"kit cars" get a bad name because of all the retard who put ferrari F40 bodies on Fieros and stuff like that. I don't know about the other cobra manufacturers, but the "kit" I got was a frame and a body manufactured by the company and boxes of aftermarket parts by good brands. You build the car from the ground up.

2)My Cobra (I don't consider SVT pusstangs to be real cobras)is fast. A guy I know got a new Z06 corvette and it cannot come close to keeping up off the line, accelerating from any speed, whatever (of course my car weighs 2300 lbs)

------------------
91 formula WS6 305 tpi, true dual exhaust

 

this pro'lly isn't fair to all you city boys, havin' to deal with the cops all the time.
'89 RS 305 tbi, hooker headers, 2" pipe stops in front of the rear wheels, no cat, just dual glasspacks, can't hear in the car, can't hear when i go by. i've been told that my friends can hear me 2 1/2 miles away if i hold her open in 2nd or 3rd!

 

"355, 10.5:1 compression, Big Cam (248/254 @ .50 with .545/.565 lift), TFS G2 Heads, Full lenght headers, Dual 3in pipe with Flow tech afterburner mufflers (loud as 40 series). Sounds cool at idle but even better up around 6750 RPM's. It has honestly set off a car alarm about 2.5 blocks away just leaving a stop sign normal."

Sound File???? Also, do u have TPI??

------------------
89 RS

STILL Looking For:
An 87 IROC-Z28 350 TPI

 

i got hooker shorties. y pipe to a hollow stock gm cat. then a 3 in alll the way back .no muffler. now thats ****in loud. i wish i could make a wav file to prove it.

 

i still think im the loudest....well its louder now.

im running open hooker Long tubes 1 3/4


it is not wise to drive that car, cuz im goin deaf.

my girlfriend must have set off 25 alarms in a parking lot the other day...too many sounds goin off to count em.

g0d i love hookers

 

[QUOTE]Originally posted by MRZ28HO
[B]Actually that would still be a 351 (Windsor, Cleveland). The 302 (4.9L) Ford is a 4.00" bore by 3.00" stroke engine, and the 351 (5.8L) is a 4.00" bore by 3.50" stroke. The 347 (which is 5.6L) is a 302 (4.03" bore) with a 3.40" stroke.


351`s have a taller deck height than a 302 thats why its a 347 not a 351 when u put the 351 crank in a 302 block, check any mustang sight and u should be able to find this to be true.

 

Mine is pretty loud right now. Just the Hooker Super Comp long tubes on the 406. I have to get it to the muffler shop to get the rest done. It does sound pretty frigging mean now though.

 

My cousin will, lol, when he gets those new "mufflers" and true duals on his truck ('52 Ford F-1 with a 239ci Flathead V8)

Otherwise, the guy down the block with the Honda with a 5" tip