Question...
Question...
I just bought a used 1983 ??Barelita??. It has a stock 305 V8 4 barrel Carb, stock exhast, stock every thing. Well my question is what should I do with $400 dollars to get the highest horse power gain. I think the biggest choke point on the car is the dumb stock exhast, thats why Iam posting this here. What parts would you recomend?
I think I might just do that but I have a couple more questions?
Would this provide a significante increase?
Would I need to worry about any thing because i have a 3 speed automatic?
Edelbrock Performer EGR Intake Manifold(Do i need the EGR if i live in Texas?)
Headman Headers(Which one should I use?)
Comp Cams "Xtreme Energy"
* Advertised duration: 262 intake/270 exhaust
* Duration at .050 in. cam lift: 218 intake/224 exhaust
* Gross valve lift: .462 in. intake/.469 in. exhaust
* Lobe separation: 110 degrees
* RPM range: 1,300 to 5,600
* Noticeable idle
Comp Cam Lifters
Would this provide a significante increase?
Would I need to worry about any thing because i have a 3 speed automatic?
Edelbrock Performer EGR Intake Manifold(Do i need the EGR if i live in Texas?)
Headman Headers(Which one should I use?)
Comp Cams "Xtreme Energy"
* Advertised duration: 262 intake/270 exhaust
* Duration at .050 in. cam lift: 218 intake/224 exhaust
* Gross valve lift: .462 in. intake/.469 in. exhaust
* Lobe separation: 110 degrees
* RPM range: 1,300 to 5,600
* Noticeable idle
Comp Cam Lifters
Last edited by linx310; Jan 10, 2002 at 11:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post




