Is there an aftermarket CC distributor for our cars?
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Is there an aftermarket CC distributor for our cars?
Yes, there are a few stock-type, HEI-style, computer controlled aftermarket distributors available for 3rd gens:
Large-cap, coil-in-cap HEI:
Accel, p/n 59109
Small-cap, separate coil HEI:
Accel, p/n 60109
Mallory, p/n 8048204
Summit, p/n 850008 {apparently no longer available - 11/10}
Holley, p/n 890-160{apparently no longer available - 11/10}
Proform, p/n's 66939BK (black cap), 66938RC (red cap - that p/n looks suspicious considering the other p/n's), and 66939BKC (not sure what's different between it and the 66939BK).
There may be others, but this is at least a start. I got these from www.summitracing.com - these are the basic p/n's, you can search their site using these #'s and these products will come up.
Large-cap, coil-in-cap HEI:
Accel, p/n 59109
Small-cap, separate coil HEI:
Accel, p/n 60109
Mallory, p/n 8048204
Summit, p/n 850008 {apparently no longer available - 11/10}
Holley, p/n 890-160{apparently no longer available - 11/10}
Proform, p/n's 66939BK (black cap), 66938RC (red cap - that p/n looks suspicious considering the other p/n's), and 66939BKC (not sure what's different between it and the 66939BK).
There may be others, but this is at least a start. I got these from www.summitracing.com - these are the basic p/n's, you can search their site using these #'s and these products will come up.
Last edited by five7kid; Nov 8, 2010 at 01:30 PM.
Supreme Member
Joined: Apr 2001
Posts: 5,675
Likes: 3
From: Changing Tires
Car: too many ...
Junior Member
Joined: Oct 2006
Posts: 12
Likes: 0
From: Florida
Car: 1988 Camaro IROC-Z
Engine: 305 Tpi
Transmission: T-5 Manual 5 Speed
Axle/Gears: 2.73 open rear for now
im also looking for a high performance aftermarket distributor for my 1986 iroc tpi. I need the large stye cap distributor. I looked up the accel one and under the notes it says its not computer controlled compatible and I can't find one on the site anywhere.
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Is there an aftermarket CC distributor for our cars?
doesnt msd make one also?
Supreme Member
iTrader: (5)
Joined: Aug 2006
Posts: 2,491
Likes: 6
From: Cleveland, Ohio
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Is there an aftermarket CC distributor for our cars?
MSD-8366
I am getting this one. I have a LO3...Summit and MSD both say it is a direct replacement for our dizzy's.
Here is Accels for our cars.
ACC-60109 (Which is posted)
Those are the only 2 I know.
I am getting this one. I have a LO3...Summit and MSD both say it is a direct replacement for our dizzy's.
Here is Accels for our cars.
ACC-60109 (Which is posted)
Those are the only 2 I know.
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
{Edit 11/10 - It appears Summit fixed the description but it's no longer available. Substitute p/n 12600BK.)
Last edited by five7kid; Nov 8, 2010 at 01:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
66938rc, 8048204, aftermarket, cc, cleveland, dist, distributor, distributors, lq4, mallory, ohio, proform, summit, tbi, type
