parts car for sale
06-23-2006, 11:45 PM
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Elk Grove Village, IL
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
parts car for sale
IF ANY ONE IS INTERSETED?
LOCATION IS ARLINGTON HEIGHTS, IL
PROJECT CAR:
88 FIREBIRD LO3 TBI AUTO
ENGINE: FROM AN 85 TRANS AM 305 (215 HP) 416 HEADS.
STOCK REBUILD WITH EXTREME ENERGY COMPCAM 12-262-4 AND MATCHING VALVETRAIN (LIFTERS SPRINGS ECT) COMPCAM 1.52 ROLLER ROCKER ARMS NEW PISTONS AND RINGS, OIL PUMP, ALL NEW BEARINGS. BLOCK WAS BOILED PRIOR TO REBUILD. RADIATOR IS NEW ALSO. 160 STAT
INTAKE: 350 TRUCK MANIFOLD WITH TBI ADAPTER PLATE WITH 2" BORES, HOLLEY 2" TBI WITH 85PPH
INJECTORS CFM-FUEL GUAGE ADAPTER AND A 0-30 PSI SUMMIT GUAGE.
EXAUST: HOOKERS CERAMIC COATED (HOK-2460-1HKR) AND Y PIPE. 3" CATCO CAT, 3" Flowmaster
American Thunder Exhaust Systems WITH 80 SERIES MUFFLER AND CROME TIPS. ABOUT 1000.00 SPENT ON EXAUST ALONE
TRANSMISSION: REBUILT 700R4 WITH 2000-2200RPM STALL CONVERTER.
NEW BRAKE CALIPERS AND PADS ALL AROUND
NEW HEAVYDUTY ENDLINKS, SWAYBARS AND SPRINGS BOTH FRONT AND BACK OUT OF AN 85 TA THAT HAD THE WS6 PACKAGE. BRAND NEW SHOCKS ALL AROUND.
THE WS6 SUSPENSION (BIGGER SWAYBARS) AND HAS A BORGWARNER REAREND WITH A 3.27 GEAR AND CALIPER BRAKES.
ALSO I HAVE THE ORIGINAL REAR END AND TRANS FROM THE 88. ALSO INCLUDED
THIS CAR NEEDS TUNING I HAVE THE CHIP PROGRAMMER (WILLEM) AND SOFTWARE THAT I WILL ALSO INCLUDE.
BODY IS IN FAIR CONDITION. I HAVE NEW FENDERS FOR THE FRONT. HAS SOME RUST.
I HAVE THE 85 TA RIMS ON THE CAR WITH BRAND NEW YOKOHAMA A430 WIDER THAN STOCK I BELIEVE HAS LITERALLY MAYBE 15 MILES ON THEM. TIRES ALONE WAS 600.00.
DASH HAS NEW LED BULBS INSTEAD OF THE ORANGE COVERED LIGHTS. THERE ARE MORE NEW PARTS THAT I CAN'T SEEM TO REMEMBER WHAT THEY ARE AT THIS TIME. CAR WOULD NEED TO BE TRAILERED TO ITS NEW HOME.
I AM LOOKING FOR 1200.00 OBO. EMAIL ME IF YOU HAVE ANY QUESTIONS.
RARE5SPD@AOL.COM
LOCATION IS ARLINGTON HEIGHTS, IL
PROJECT CAR:
88 FIREBIRD LO3 TBI AUTO
ENGINE: FROM AN 85 TRANS AM 305 (215 HP) 416 HEADS.
STOCK REBUILD WITH EXTREME ENERGY COMPCAM 12-262-4 AND MATCHING VALVETRAIN (LIFTERS SPRINGS ECT) COMPCAM 1.52 ROLLER ROCKER ARMS NEW PISTONS AND RINGS, OIL PUMP, ALL NEW BEARINGS. BLOCK WAS BOILED PRIOR TO REBUILD. RADIATOR IS NEW ALSO. 160 STAT
INTAKE: 350 TRUCK MANIFOLD WITH TBI ADAPTER PLATE WITH 2" BORES, HOLLEY 2" TBI WITH 85PPH
INJECTORS CFM-FUEL GUAGE ADAPTER AND A 0-30 PSI SUMMIT GUAGE.
EXAUST: HOOKERS CERAMIC COATED (HOK-2460-1HKR) AND Y PIPE. 3" CATCO CAT, 3" Flowmaster
American Thunder Exhaust Systems WITH 80 SERIES MUFFLER AND CROME TIPS. ABOUT 1000.00 SPENT ON EXAUST ALONE
TRANSMISSION: REBUILT 700R4 WITH 2000-2200RPM STALL CONVERTER.
NEW BRAKE CALIPERS AND PADS ALL AROUND
NEW HEAVYDUTY ENDLINKS, SWAYBARS AND SPRINGS BOTH FRONT AND BACK OUT OF AN 85 TA THAT HAD THE WS6 PACKAGE. BRAND NEW SHOCKS ALL AROUND.
THE WS6 SUSPENSION (BIGGER SWAYBARS) AND HAS A BORGWARNER REAREND WITH A 3.27 GEAR AND CALIPER BRAKES.
ALSO I HAVE THE ORIGINAL REAR END AND TRANS FROM THE 88. ALSO INCLUDED
THIS CAR NEEDS TUNING I HAVE THE CHIP PROGRAMMER (WILLEM) AND SOFTWARE THAT I WILL ALSO INCLUDE.
BODY IS IN FAIR CONDITION. I HAVE NEW FENDERS FOR THE FRONT. HAS SOME RUST.
I HAVE THE 85 TA RIMS ON THE CAR WITH BRAND NEW YOKOHAMA A430 WIDER THAN STOCK I BELIEVE HAS LITERALLY MAYBE 15 MILES ON THEM. TIRES ALONE WAS 600.00.
DASH HAS NEW LED BULBS INSTEAD OF THE ORANGE COVERED LIGHTS. THERE ARE MORE NEW PARTS THAT I CAN'T SEEM TO REMEMBER WHAT THEY ARE AT THIS TIME. CAR WOULD NEED TO BE TRAILERED TO ITS NEW HOME.
I AM LOOKING FOR 1200.00 OBO. EMAIL ME IF YOU HAVE ANY QUESTIONS.
RARE5SPD@AOL.COM
Last edited by Bryan85TA; 09-20-2006 at 01:18 AM.
09-20-2006, 08:51 PM
#3
Junior Member
Join Date: Sep 2006
Location: virginia beach virginia
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
pics to ehido_surfer89@yahoo.com plz
09-23-2006, 05:30 AM
#4
Senior Member
iTrader: (4)
Join Date: Feb 2005
Location: Portage, MI.
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z-28
Engine: 350
Transmission: 700R4
09-23-2006, 12:33 PM
#5
Junior Member
Thread Starter
Join Date: May 2004
Location: Elk Grove Village, IL
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
i don't have time to work on it any more because i have lack of funds since i just recently bought a new car. I spent alot of money on this project and i know im not going to be able to sell it for the amount that i have put into it. I would part it out and make more money but i don't have the time or the garage to do it in. My loss somebody's gain.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
355tpipickup
Engine/Drivetrain/Suspension Parts for Sale
8
08-21-2015 12:18 AM