blk89 5.7liter

iTrader: (1)

Hi
I`m from Lansing, I see your in Midland. Does this car have a 700r4 tranny? If so what condition is it in and how much do you want for it? I am close enough I could pick it up if you have one. Pm. me if you have one.
Thanks

86Z

iTrader: (4)

did you sell the ground effects? i'm looking for the lower front spoiler and the 2 metal brackets front and back for the lower pass rocker ground effect

liteumup387

hey man, would you happen to have the headlight switch let me know how much (the pull kind not the one thats on the turn signal lever)
thanks, john

jtb51b

I need a tailshaft housing for a 700r4, is it still there? How much would you want for it? Thanks,
Jason

dtcustoms

[QUOTE=86Z]did you sell the ground effects? i'm looking for the lower front spoiler and the 2 metal brackets front and back for the lower pass rocker ground effect[/QUOTE

I have a guy who is suppsed to be paypalling me for the whole grd effects kit, no money showing yet so I will get back to you tomrrow if I dont see it in there
----------
I am keeping the 350 tpi and tranny, all I have laying around is a v6 from a camaro with that tranny
----------
I am not totally understanding what you are looking for, do you have a pic?

urbanlegend

Hey If you still have them i need both sunvisors (black), the hatch deck lid, and the hatch hinge pins (see pic)
and how much shipped to 07066? Thanks

smokefan

hey dtcustoms i sent you the money for the gfx's thru paypal. let me know if you got it. i sent it this morning. thanks

dtcustoms

yes I still have that, make me an offer on it and I will get a shipping quote

dtcustoms

top

Ray102386

I want those rims, ZO6 chrome, wasnt it $440 shipped? What about the torque arm mount. What is the offset on the rims too, need to order spacers. Did my homework on the rims...sorry for the delay.

urbanlegend

Hows $60 plus shipping sound for the hatch items and both sunvisors? zip is 07066

dtcustoms

they are polished 18x9.5 and you will need 2" spacers for them which I can also get for you
----------
seems a little low to me, let me check what they are selling for, $60- will maybe pay my workers to take it off haha, but if thats all its worth then its sold so give me a few to look it up

Ray102386

so i get the adapters too? that extra half inch just made my tire shopping change....I really need that torque arm bracket, need the overdrive of a 700-R4.

dtcustoms

sorry I am a little confused with this, $440- for the wheels I can do $180 for all 4 spacers shipped, they have studs and lugnuts already.

Ray102386

This is where i got the idea that they were 18X9 and not 18X9.5. This is also where i got the idea that they are $440 shipped to my door step. I guess i meant polished, not chrome.


Where are the adapters from if i may ask. Im debating just using front adapters and not use the rear ones and just get a 4th gen rearend.

dtcustoms

$440- shipped is the price on the wheels your correct, I must have had a typing error on the size they are 18x9.5 spacers are made of 6061 billet alluminum and come fron north carolina $90- for 2 or 180 for 4

Ray102386

so it is $440 on my door step? Are these adapters comparable to Skulte 2" adapters? Or the same thing?

dtcustoms

yes $440- will cover shipping and insurance on them. they are not skulte but I guess there compairable, I never used there products but I have used these and they worked great!

Ray102386

The rim options are ZO6 polished and ZR1 gunmetal correct? Im going to be taking one set, i know that. Gimme a paypal address too, mine is my screen name so you will know who it came from. Im in the process of trying to find a 4th gen rearend right now so i wont have to use adapters on my drive wheels. PM me this stuff if you dont mind.

dtcustoms

actually I have polished, black, white, silver and gunmetal right now in both styles

Ray102386

Can i get pics of the black and gunmetal, ZO6 please?

dtcustoms

whats your email?

Ray102386

Ray102386@hotmail.com

r0nin89

maroon91rs

Hey man I pm'ed you yesterday about my parts and havent heard back from you. Just wondering if you sent them out yet, throw me a PM when you get a chance to let me know the status. Thanks.

camaro of solar

iTrader: (2)

wheels still up for grabs? if so could you send me more pics? same with interior plastics? solarofthesix@hotmail.com thanks

TexasB4C

iTrader: (1)

Do you have a black passenger door arm rest, or maybe a set of both? How much would you want with shipping if you do have them? Houston 77090

Ray102386

Im still missing some pictures, need something for me to say...."I'll take it"

Still would like to know what the offset is on these rims too, just precision is what i am shooting for.

dtcustoms

sorry guys im being takin over by work right now!! anyways all parts are off the car that were purchased. all wheel orders have been sent. and all emails for pics have also been sent, the hood is funtional and I do still have it, make an offer, all the trim peices are here still make me an offer. thanks guys!!
----------
http://myspace-175.vo.llnwd.net/0069...97364175_l.jpg

Ray102386

PayPal address please. I want a set of polished ZO6's. How about those fenders, they still up? Good condition? You also mentioned a billit gas cap. Never seen one, can i get a pic of that? How much to ship fenders/gas cap to 74006?

dtcustoms

Ray, check your pm

Ray102386

Check your paypal, and then put something in the mail....

dtcustoms

sounds good, thanks again

Elephantismo

does the car still have the Guage Cluster? is it a 145 mph w/ tach? does it all work properly? Im guessing the tach reads off but tahts ok if it is. Ill give you 60 shipped for it if its in decent shape. i would like pictures. Also, how about the little plasitc **** on the passenger side front seat for lsiding it forward? add 7 dollars? Does it have a working cruise control servo? Ill throw in 20 more for that if u got it and it works.

Ray102386

Hell if its a 145 i will give you $85 shipped....

dtcustoms

everything works properly on it, im guessin its not the 145 cluster though it originally had the v6 in it. sorry but let me know if your interested in it anyways

Elephantismo

If its a v6 tach and guage setup then i owuld only be using it for diagnostics. I dont think it will help me much at the price its worth. Ty tho.

smokefan

just wondering when the gfx's were going to be shipped out. Pm me and let me know. thanks

camaronewbie

If you still have it, I need the wire connectors that plug into the back of the Heater/AC controls. There should be two connector sets. I need them with enough wire hanging out to splice into my car, as these two connectors fried themselves. Let me know if you have. Jeff

dwillis

iTrader: (6)

man im sorry but i skipped to the end instead of reading for 3 days....is the car a V8 tbi and if so do you have the tbi unit..Black sunvisors...thanks

83z28camaro

Did you get my pm's
thanks mike

SVThuh

Has anyone called dibs on the front clip/bumper/chinspoiler, etc?

In not Im interested!

Ray102386

How are my rims getting shipped? When should they arrive?

draco

Have the spoiler still? if so, how much + shipping to 26101?

smokefan

Has anyone received there parts yet. I was wondering since i left a message and havent gotten a response yet. I know that he left a message a few days back about him being swamped at work. I was just curious if anyone got there parts yet

Ray102386

Nope....

compuwiz1937

iTrader: (17)

I haven't yet either, I didn't want to bug him about it though because I knew he said he was swamped at work and I just figured that he may have sent it Parcel Post instead of Priority Mail, but in that case the parts should have shown up today and they didn't.

smokefan

i am not meaning to bug anyone cause i know how work can be and trying to make time to strip the car down and getting to ups to ship things. i have a hard time myself when i sell things on ebay and getting things out quickly. i am just wondering whats going on.

maroon91rs

I'm still waiting for my parts. I got a PM saying he was going to mail out tracking numbers on monday but still nothing. My parts we small and shouldnt have been a huge problem. I have faith I'll get them, Im just hoping its sooner than later

FIRECHICKEN

iTrader: (3)

I need the side ground effects if it still has them. It has the ones with the scoops in them right? Let me know how much if they are available. Oh by the way are those Z3 fenders still available? If not where did you get them? Are they fiberglass?

thanx