[NH] Lots of Third gen parts (see gallery) - in NH
07-18-2012, 07:32 AM
#52
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Yes sir, both sets are available. 20.00 per pair + shipping, or 30.00 for both pairs, plus shipping.
Hit me with a PM if you'd like to purchase.
Thanks,
Shepp
Hit me with a PM if you'd like to purchase.
Thanks,
Shepp
07-18-2012, 09:15 AM
#53
Want a title? Post!
Join Date: Jul 2010
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lots of Third gen parts (see gallery) - in NH
Will they fit an 87 firebird? If so i am interested in both sets.
I will be in claremont nh on aug 4th. If that is close i can pick them up.
I will be in claremont nh on aug 4th. If that is close i can pick them up.
07-18-2012, 09:55 AM
#54
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
From what I understand these sills would fit, but I woud ask around in the forums to be sure.
Claremont is approx 90 miles from my town, but I could probably meet you part way (say in the Concord, NH area) to save you some time.
If you decide to purchase just hit me with a PM.
Cheers,
Shepp
Claremont is approx 90 miles from my town, but I could probably meet you part way (say in the Concord, NH area) to save you some time.
If you decide to purchase just hit me with a PM.
Cheers,
Shepp
07-23-2012, 12:42 PM
#55
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
If this stuff doesn't sell, my wife is going to throw the boxes out when I am at work...
Shepp
Shepp
07-26-2012, 07:02 AM
#57
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Yes I do. PM me 60.00 + shipping is what I am asking but I have some wiggle room 
Shepp
Shepp
07-27-2012, 10:48 AM
#58
Member
Join Date: Feb 2012
Location: Woodbridge, New Jersey
Posts: 350
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Camaro Z28
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73
Re: Lots of Third gen parts (see gallery) - in NH
Is the console lid stll available? Been looking for a new one but prices are too expensive. But 60 sounds reasonable. Pics?
07-28-2012, 11:58 AM
#60
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Top door panels still available but another person asked this week also. If he does not confirm he has send a mo out today I will pm you.
Console lid is available still and I have pics of it in my gallery. Pm me if you would like to buy it.
Shepp
Console lid is available still and I have pics of it in my gallery. Pm me if you would like to buy it.
Shepp
07-30-2012, 11:24 AM
#61
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Top door panels Black (L&R) - SOLD!
Let's move the rest of this...
Shepp
Let's move the rest of this...
Shepp
08-01-2012, 08:17 AM
#62
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
I have pics of the console lid in my gallery:
Top: https://www.thirdgen.org/forums/albu...ictureid=33006
Bottom: https://www.thirdgen.org/forums/albu...ictureid=34255
PM me if you want to buy it. I'll get you my paypal info.
Thanks,
Shepp
08-01-2012, 08:18 AM
#63
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Seat track dust covers "Lower" - SOLD
08-08-2012, 09:10 AM
#65
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
All these items still for sale, reasonable offers are accepted:
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
Arm rests, excellent cond (used) - 45.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Center console lid (used, excellent cond.) - 60.00 (make an offer)
Kicker panels L/R (grey) - 20.00
ECM Svc control #1226455 for STD tranny - 30.00 (make an offer)
Seat tracks: INNER Drivers and Passenger - 30.00 (make an offer)
NOS complete set Seat tracks: driver and passenger - 65.00 (make an offer)
*I will sell all these tracks as a package for 65.00)*
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Side mirror assembly (Used, works good, needs paint), Drivers 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer
Shepp
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
Arm rests, excellent cond (used) - 45.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Center console lid (used, excellent cond.) - 60.00 (make an offer)
Kicker panels L/R (grey) - 20.00
ECM Svc control #1226455 for STD tranny - 30.00 (make an offer)
Seat tracks: INNER Drivers and Passenger - 30.00 (make an offer)
NOS complete set Seat tracks: driver and passenger - 65.00 (make an offer)
*I will sell all these tracks as a package for 65.00)*
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Side mirror assembly (Used, works good, needs paint), Drivers 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer
Shepp
08-14-2012, 05:03 PM
#66
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Seat tracks: INNER Drivers and Passenger - 30.00 (make an offer)
NOS complete set Seat tracks: driver and passenger - 65.00 (make an offer)
Looking like sold... dude getting a great deal - 40.00 for all + shipping
Like I said before, make an offer you never know.
Shepp
NOS complete set Seat tracks: driver and passenger - 65.00 (make an offer)
Looking like sold... dude getting a great deal - 40.00 for all + shipping
Like I said before, make an offer you never know.
Shepp
08-15-2012, 07:19 AM
#67
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Seat tracks: INNER Drivers and Passenger
NOS complete set Seat tracks: driver and passenger
Are now SOLD
Shepp
NOS complete set Seat tracks: driver and passenger
Are now SOLD
Shepp
08-17-2012, 09:21 PM
#68
Member
iTrader: (7)
Join Date: Aug 2011
Location: Plaistow,NH
Posts: 413
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Camaro Z
Engine: 350
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Re: Lots of Third gen parts (see gallery) - in NH
What color are the arm rests? If they're black I would be interested.
Thanks
Thanks
08-27-2012, 08:29 AM
#69
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Arm Rests and Center Console Lid are now SOLD
Shepp
Shepp
08-27-2012, 08:32 AM
#70
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
ECM Svc control #1226455 for STD tranny - No longer for sale. Keeping this for my car as no one wants it and it matches my car anyway.
Shepp
Shepp
08-29-2012, 09:31 AM
#71
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Smaller list of items for sale, but still for sale.
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Kicker panels L/R (grey) - 20.00
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Side mirror assembly (Used, works good, needs paint), Drivers 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer)
Shepp
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Kicker panels L/R (grey) - 20.00
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Side mirror assembly (Used, works good, needs paint), Drivers 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer)
Shepp
08-29-2012, 10:04 AM
#72
Supreme Member
iTrader: (1)
Join Date: Jul 2007
Location: Great Smoky Mountains, Bryson City North Carolina
Posts: 1,258
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86WS6 30K and 82WS7 24K
Engine: 86:305 TPI, 82: 305 LG4
Transmission: 86:700R4, 82: T200C
Axle/Gears: 86:3:27 9 bolt, 82: 3:23 10 bolt
Re: Lots of Third gen parts (see gallery) - in NH
I am interested in the grey door sills, only if they are in good enough condition for a show car. I have bought two sets so far from other members. Both sets were supposed to be like new, however neither set was good enough to use for this car. Could not tell much about the condition of the sills you have from the pictures...
Thanks,
Charles
Thanks,
Charles
08-29-2012, 12:16 PM
#73
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
I am interested in the grey door sills, only if they are in good enough condition for a show car. I have bought two sets so far from other members. Both sets were supposed to be like new, however neither set was good enough to use for this car. Could not tell much about the condition of the sills you have from the pictures...
Thanks,
Charles
Thanks,
Charles
I would not claim either set are 'mint' or 'showroom' condition. I would characterize them as very good. One set needs to be cleaned but the other looks really nice. Neither set has cracks or damage, just wear. With all that said, of course you need more than my word - and that is fine.
What would you like from me in order to better understand condition? Closer images (so that you have multiple images per sill), images taken in the sun VS indoors, let me know what I can do to help you decide and I'll do what I can to oblige your request.
Regards,
Shepp
08-29-2012, 12:42 PM
#75
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
https://www.thirdgen.org/forums/memb...seatlatch.html
In the left most plastic bag. If you'd like other images let me know and I'll snap a few more.
Shepp
In the left most plastic bag. If you'd like other images let me know and I'll snap a few more.
Shepp
08-29-2012, 12:52 PM
#76
Junior Member
Join Date: May 2012
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lots of Third gen parts (see gallery) - in NH
Thanks for the pic. I am only looking to get the **** if it is yellow lettered becuase my faded out. If it is and you are interested in selling it post some front pics to see it if you can please..
08-29-2012, 01:13 PM
#77
Supreme Member
iTrader: (1)
Join Date: Jul 2007
Location: Great Smoky Mountains, Bryson City North Carolina
Posts: 1,258
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86WS6 30K and 82WS7 24K
Engine: 86:305 TPI, 82: 305 LG4
Transmission: 86:700R4, 82: T200C
Axle/Gears: 86:3:27 9 bolt, 82: 3:23 10 bolt
Re: Lots of Third gen parts (see gallery) - in NH
Hi Charles,
I would not claim either set are 'mint' or 'showroom' condition. I would characterize them as very good. One set needs to be cleaned but the other looks really nice. Neither set has cracks or damage, just wear. With all that said, of course you need more than my word - and that is fine.
What would you like from me in order to better understand condition? Closer images (so that you have multiple images per sill), images taken in the sun VS indoors, let me know what I can do to help you decide and I'll do what I can to oblige your request.
Regards,
Shepp
I would not claim either set are 'mint' or 'showroom' condition. I would characterize them as very good. One set needs to be cleaned but the other looks really nice. Neither set has cracks or damage, just wear. With all that said, of course you need more than my word - and that is fine.
What would you like from me in order to better understand condition? Closer images (so that you have multiple images per sill), images taken in the sun VS indoors, let me know what I can do to help you decide and I'll do what I can to oblige your request.
Regards,
Shepp
Charles
08-29-2012, 01:34 PM
#78
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Hi Shepp, Your sills sound like the ones I have purchased so far. They are completely usuable, however not perfect. The original sills on the car have some very minor wear on the driver's side, and a couple of small scratches on the passenger side. I am looking for a new or like new set to complete the car. The car started off as a weekend cruiser, however now it is a 29K trailer queen. I have gotten caught up in that trap of trying to make her perfect. Thanks for the accurate discription, however I believe that it may be best for me to keep looking. Good luck with the sale of your parts.
Charles
Charles
Shepp
08-29-2012, 01:36 PM
#79
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Shepp
08-29-2012, 03:27 PM
#80
Junior Member
Join Date: May 2012
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lots of Third gen parts (see gallery) - in NH
08-31-2012, 07:06 AM
#82
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Kicker panels L/R (grey) - SOLD
Shepp
Shepp
09-10-2012, 08:28 AM
#83
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Bump
10-01-2012, 01:37 PM
#84
Junior Member
Thread Starter
iTrader: (5)
Join Date: May 2012
Location: NH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH
Still for sale:
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Drivers-side mirror assembly (Used, works good, needs paint), 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer)
Shepp
Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Drivers-side mirror assembly (Used, works good, needs paint), 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer)
Shepp
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
08-08-2015 08:16 PM
