(PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Thread Starter
Junior Member
iTrader: (3)
Joined: Mar 2009
Posts: 17
Likes: 0
From: 50 miles from philly
Car: 91 gta and chevy powered toyota
Engine: 5.7 in both of them
Transmission: 700r4 raptor
Axle/Gears: 3.73
(PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
OR TAN WHAT EVER YOU WANT TO CALL THE COLOR
I REALLY NEED TO FIND A SET OF FRONT SEATS FOR A GTA DO NOT NEED JUNK, THEY HAVE TO BE NICE.AND OTHER INTERIOR PARTS ...LET ME KNOW WHAT YOU HAVE,,,
THANK YOU GUYS
I REALLY NEED TO FIND A SET OF FRONT SEATS FOR A GTA DO NOT NEED JUNK, THEY HAVE TO BE NICE.AND OTHER INTERIOR PARTS ...LET ME KNOW WHAT YOU HAVE,,,
THANK YOU GUYS
Member
iTrader: (5)
Joined: Jul 2005
Posts: 103
Likes: 0
From: chesterfield, va
Car: 91 t/a gta
Engine: 383
Transmission: t-56
Axle/Gears: moser/auburn/410
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
i have a complete tan interior in a 91 firebird parts car. the front seats are ok condition but drivers seat is torn in the usual spot. what all do you need?
Joined: Aug 2005
Posts: 847
Likes: 1
From: Brunswick, Ga.
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
If these parts are for your 91 GTA, its beechwood.
I believe Firebirds had tan and its lighter than the beechwood.
Alot of interior parts are different in 88-92.
What beechwood interior parts are you looking for?
I believe Firebirds had tan and its lighter than the beechwood.
Alot of interior parts are different in 88-92.
What beechwood interior parts are you looking for?
Thread Starter
Junior Member
iTrader: (3)
Joined: Mar 2009
Posts: 17
Likes: 0
From: 50 miles from philly
Car: 91 gta and chevy powered toyota
Engine: 5.7 in both of them
Transmission: 700r4 raptor
Axle/Gears: 3.73
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
REALY NEED TO REPLACE THE FRONT SEATS THEY ARE LEATHER,,I KNOW IT'S A LONGSHOT,
BUT I AM TRYING
BUT I AM TRYING
Joined: Aug 2005
Posts: 847
Likes: 1
From: Brunswick, Ga.
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I have found its almost impossible to find 3rd gen leather seats in even good condition.
You are better off buying new covers and recover them.
You are better off buying new covers and recover them.
Joined: Sep 2002
Posts: 1,099
Likes: 21
From: Melbourne Australia but from South Carolina
Car: 1991 Trans Am convertible
Engine: 305 TPI
Transmission: Auto
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I agree, I think it would be impossible to find good leather in a third gen seat. I am now looking for leather covers too. Does anyone know where I could get a really good set of floor mats for a 91 TAm?
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I pulled plastics from a 91 Firebird on Tues. I am not sure if they are tan or beechwood. I can send u pics if u send me your email address
Thx
Ray
Thx
Ray
Trending Topics
Thread Starter
Junior Member
iTrader: (3)
Joined: Mar 2009
Posts: 17
Likes: 0
From: 50 miles from philly
Car: 91 gta and chevy powered toyota
Engine: 5.7 in both of them
Transmission: 700r4 raptor
Axle/Gears: 3.73
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Joined: Sep 2002
Posts: 1,099
Likes: 21
From: Melbourne Australia but from South Carolina
Car: 1991 Trans Am convertible
Engine: 305 TPI
Transmission: Auto
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
please send pics of floor mats to: yankeecarman@yahoo.com.au
Junior Member
Joined: Apr 2006
Posts: 29
Likes: 0
From: milwaukee, WI
Car: 87 formula
Engine: 350tpi
Transmission: 700r4
Axle/Gears: stock posi
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
if youre still interested im parting a complete 88 gta with tan really good interior eccept for the back seat. if youre interested in anything let me know..
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
LMK if interested
Thx
Ray
Joined: May 2008
Posts: 127
Likes: 1
From: Southwest
Car: 1990 GTA (T-Top)
Engine: 305 TPI (LB9) / 115k miles
Transmission: 4L60 (MD8 non-E)
Axle/Gears: 2.73 (GU2) 28 spline POSI (G80)
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Do you still have any beechwood interior parts? I'm looking for the driver side cup holder and the long kick rail plastic piece that's located where the bottom of the door comes near when it's closed.
Let me know if you can get me these parts.
Thanks.
Let me know if you can get me these parts.
Thanks.
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I realize this post is at least 2 years old but I am in NJ and looking for some beechwood colored parts, in good condition, for my GTA. Is there anyone that may have a passenger side door sill, sail panels, the plastic fill panel between the headliner and the hatch and finally the little washer like trim piece that sits behind the top portion of the door pull. I was also wondering if anyone could tell me the best way to go about recovering my headliner. I tried to buy some parts from a parts supplier but they sent me tan parts.
Joined: May 2008
Posts: 127
Likes: 1
From: Southwest
Car: 1990 GTA (T-Top)
Engine: 305 TPI (LB9) / 115k miles
Transmission: 4L60 (MD8 non-E)
Axle/Gears: 2.73 (GU2) 28 spline POSI (G80)
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Id suggest finding a local upholstry shop to do your sail panels and headliner (assuming you have the originals in workable condition). The after market headliners don't fit good. Your best bet is to carefully (and I do mean CAREFULLY) remove your headliner and have it refoamed (if needed) and re covered. Its extremely fragile. You may need to get some epoxy glue to custom fix any clips that may break in removing it. I had to do this for mine with a piece of bent paper clip. It holds on perfectly and fits like a pro. My local shop redid mine for $100. He re-leathered my door panels for $50 each. My interior looks like its fresh from the factory.
Member
iTrader: (2)
Joined: Mar 2005
Posts: 140
Likes: 0
From: Killingly, CT
Car: '82 Camaro Z28 (Former Pace car)
Engine: 85 5.7L Small Block
Transmission: WC T5
Axle/Gears: 96 disc LT1 3.23 Auburn 10 bolt.
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Got a tan carpeted center console
Member
iTrader: (9)
Joined: Feb 2005
Posts: 166
Likes: 0
From: FRESNO CA.
Car: DEPENDS ON WHAT DAY IT IS
Engine: 428 STROKED TO 462
Transmission: 6 SPEED
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I have an almost complete 91 trans am convertible beechwood interior. all the vert only stuff is gone but still have stuff like sill plates and the door pulls etc
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I am definetly interested in the sills, the washer like trim pieces at the top of the pulls and the plasic piece that seperates the headliner for the rear hatch. Let me know how much.
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
I'm sorry I misssed that is was a convertible but I am still interested in sills and door pull trim. Also if you have the trim piece that goes around the radio in good shape I am interested.
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Have a near mint set of later replacement padded hard top visors in a medium brown darker than tan. Not really sure what color they are exactly. If anyone needs them I will provide pics and other info if you PM or email me the email address you want them sent to, Henry
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Thx
Ray
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Yeah, maybe so. I think I remember them coming out of an incredibly clean Berlinetta early to mid eighties, I forget exactly. I'll try and get you a pic, thanks
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
If they are Briar Brown, I am one of the few fans, got a whole interior a few yrs ago and not much interest. Brown 84 Firebird had it. Seen very few in 6 yrs so i say rare.
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: (PA) NEED BEECHWOOD INTERIOR PARTS 88 TO 92
Hey, who knows, someone with a lighter tan interior might like darker colored visors. I've got an originally all medium gray interior, but I like my black belt receivers and my black visors, goes with all the other black, but not everybody likes the same stuff. I'm thinking that's a good thing...
Thread
Thread Starter
Forum
Replies
Last Post
Thomas
Exterior Parts for Sale
21
Oct 7, 2015 05:33 PM
Thomas
Interior Parts for Sale
12
Oct 3, 2015 05:34 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM








