PMD Seats Needed
Joined: Jan 2002
Posts: 1,434
Likes: 6
From: Dallas
Car: 1982 Trans Am KITT Replica
Engine: LU5 305 CROSSFIRE
Transmission: TH-350
Axle/Gears: Limited Slip 3:23
Re: PMD Seats Needed
My last set left
maroon NON powered cloth pair with PMDS logos
driver seat kinda rough
maroon NON powered cloth pair with PMDS logos
driver seat kinda rough
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: PMD Seats Needed
i have a pair, both are ripped if interested
Thread Starter
Want a title? Post!
Joined: Apr 2009
Posts: 0
Likes: 0
Re: PMD Seats Needed
Send some pictures and a price to mitchf1947@yahoo.com . They will be getting recovered . Price matters and they need to be complete if possible .
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
Re: PMD Seats Needed
i have my blue ones in my 82 t/a
not broken down or anything like that, the stretchy thin fabric glued on the backside of the uppers peeled off and is gone,
one cig burn in one of the seats, and only a few little flaws in them, id rate them about a 7 in a 10 scale overall condition.. due to minor rip here and there,
and they are actually barely dirty at all...... still great blue color and everything, no sun fading,,
pass side:
driver side:
i dont like them because they are just plain too tall/high........
i want short height buckets in this car,,,
if anyone is interested then we need to discuss price and condition and such
and you would need to arrange pickup/shipping from here somehow.
text me 217 671 7792 or email me.... i dont get to check forums like ever..
good luck!!
not broken down or anything like that, the stretchy thin fabric glued on the backside of the uppers peeled off and is gone,
one cig burn in one of the seats, and only a few little flaws in them, id rate them about a 7 in a 10 scale overall condition.. due to minor rip here and there,
and they are actually barely dirty at all...... still great blue color and everything, no sun fading,,
pass side:
driver side:
i dont like them because they are just plain too tall/high........
i want short height buckets in this car,,,
if anyone is interested then we need to discuss price and condition and such
and you would need to arrange pickup/shipping from here somehow.
text me 217 671 7792 or email me.... i dont get to check forums like ever..
good luck!!
Last edited by Randy82WS7; Feb 20, 2010 at 06:41 AM.
Thread
Thread Starter
Forum
Replies
Last Post
