82 83 84 bird pads vs 85-92 ones, difference?
Thread Starter
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
82 83 84 bird pads vs 85-92 ones, difference?
ok i cant get a freaking straight answer out of anyone it seems
all i need to know is for sure if the 82 83 84 dash pads in the birds changed in 85 or not, or if all 82-92 pads are the same (in the birds)
yes, or no ?
if you dont know for SURE then please dont say anything
please!
im tired of getting both answers out of ppl
i could swear that we had it figured out on this forum that they are not the same pad after 84
but now its up in the air,
something about the vents changing or the speaker grilles changing
but would that prevent an 85 up pad from bolting into an 82 83 84 ?
yes?
no ?
thanks
all i need to know is for sure if the 82 83 84 dash pads in the birds changed in 85 or not, or if all 82-92 pads are the same (in the birds)
yes, or no ?
if you dont know for SURE then please dont say anything
please!
im tired of getting both answers out of ppl
i could swear that we had it figured out on this forum that they are not the same pad after 84
but now its up in the air,
something about the vents changing or the speaker grilles changing
but would that prevent an 85 up pad from bolting into an 82 83 84 ?
yes?
no ?
thanks
Senior Member
iTrader: (2)
Joined: Nov 2002
Posts: 774
Likes: 0
From: Idaho Falls
Car: 82 Trans Am
Engine: LTX
Transmission: T56
Axle/Gears: 3.42 strengthed 7.5 inch
the pads bolt-ups are the same, the earlier birds had a cosmetic indent that ran the full length of the dash pad edge to match the trim on the door panels somewhat.. the newer ones are smooth on the dash edge.. the speaker grilles changed too, though the air vents did not.. so with a newer dash you need newer grilles and vice versa.
How do I know? I have owned and bolted up both. Currently have an 85 up pad in my 82 bird.
How do I know? I have owned and bolted up both. Currently have an 85 up pad in my 82 bird.
Last edited by J's T/A; Aug 2, 2006 at 01:13 PM.
Supreme Member
iTrader: (3)
Joined: May 2004
Posts: 4,345
Likes: 1
From: Brighton, CO
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
I've got one from an 85 sitting right here (mint condition.. but no one wants to buy it lol) and it does NOT have the indent. If that helps.
Thread Starter
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
awesome thanks, good info 
cosmetic isues im not concerned with
i just am looking for one for my 82 and need one that will actually fit and work
dont care if its factory correct, as long as it doesnt have to be chopped to make it work
you know
hunter, how much for your pad you have ?
shipping from cali though
hmmmm...... oh boy..
i sent a pm anyways
thanks

cosmetic isues im not concerned with
i just am looking for one for my 82 and need one that will actually fit and work
dont care if its factory correct, as long as it doesnt have to be chopped to make it work
you know
hunter, how much for your pad you have ?
shipping from cali though
hmmmm...... oh boy..
i sent a pm anyways
thanks
Last edited by Randy82WS7; Aug 2, 2006 at 01:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1989formula5.7l
DFI and ECM
1
Aug 15, 2015 11:35 AM
Vintageracer
Interior Parts for Sale
1
Aug 11, 2015 08:13 PM




