BADNBLK- what did u do to your dash pad fiberglass it loos badass

 

It looks like everyone has put some hard work into some sharp looking interiors.Here's a couple pictures of my '83's interior.I'm still working on her but she's starting to look pretty good.

 

I've got a 92 camaro RS and it needs new seat covers. I'de rather not get leather due to the cash involved but im looking for something nice. I'm looking for red and black seat covers and if possible with "camaro" embroidered in them or the chevy bow tie. I'm welling to pay money for something nice. pleez help me find wht im looking for. Thank you.

 

Man did I love making the customer brackets for my seats!! ::Rolls Eyes::

 

holy crap those are some tall seats

 

Yeah your telling me. Fit like a glove though.

 

seats don't look good in the pictures cause of the flash

just got the interior in, needs a good detail still

 

is that a 6pt? looks nice

 

I want a cage so bad...

 

Here's a few of my interior pictures, all pretty much custom.
http://rides.webshots.com/photo/1125...41290424OyiWAa Rear subs
http://rides.webshots.com/photo/1289...41290424rPdVhs digital gauges off
http://rides.webshots.com/photo/1289...41290424feFkEU digital gauges on
http://rides.webshots.com/photo/1292...41290424pdOLMn sport/race seats and pro stick shifter in consol
http://rides.webshots.com/photo/1292...41290424pdOLMn pro stick shifter
http://rides.webshots.com/photo/1292...41290424WBuluA seats.
http://rides.webshots.com/photo/1501...41290424IutPKz 2 gauges in hood cowl, and 3 digital gauges replacing driver's side heater/ac vents
http://rides.webshots.com/photo/1501...41290424NoAhlO close up of gauges in cowl

Here's newest interior pics after the 10 point cage
http://rides.webshots.com/photo/2870...41290424XlulrX
http://rides.webshots.com/photo/2390...41290424hNajuJ
http://rides.webshots.com/photo/2199...41290424CTtULs
http://rides.webshots.com/photo/2401...41290424IFltov
http://rides.webshots.com/photo/2214...41290424rLIyMQ
http://rides.webshots.com/photo/2169...41290424bgNVNG

 

hey night rider how many camaro's u got? i can count three in the background

 

 

where are your five point harnesses bolted to because im not sure so dont take my word for it but i dont think they are sefe going straight down like that they should go at a certain angle.but you should ask someone who knows more about it than me.
just a heads up!

also how are those seats? and how was the install? im prob going to get all black ones

 

Dont worry, the 5 points look like they are straight down in that pic because i hadn't removed the extra foot an a half of the slack out of them when i took that pic lol. They are Angled back and mounted about a foot behind the seat, and bolted to the frame and have snap-end connections using 1/2 inch bolts. I didnt just "toss" them in there. I love the seats for the price i paid. Theres not much padding to them except for the covers obviously, and they really wrap you down in there snug, ive drove around probably 40 mins at the longest interval with them and havent had any comfort issues yet. Even my g/f doesnt complain lol. You can forget about trying to turn to look behind you if you get harnesses though, you gotta start using them mirrors before changing lanes lol. For the INSTALL, i went to summit and got their Summit seat slider dual locking kit for adjustablitly, and for the mounting, i went to home depot and got 1/8 inch steel half square tubing, and basically made the seat mounts out of that, using the layout of the Summit Seat mount brackets online. Took probably 3 hours all in all, to mark and drill the holes in the floor, mount the brackets, mount the seats, and mark, drill and install the 5 points.

 

oh ok good as long as there safe . doesnt sound to bad to install those seats ill prob give it a shot sometime

 

Dubcity, sure looks good....What kinda seats are those.??..I likem...Tom
----------
Urmomshot77...Tight looking as hell man....Can you show a better pic of the back area??? Thanks, Tom

 

LOL hey man.. Got quite a few, most are parts cars though. 6 F bodies

Runners...
-my 1988 camaro

-My dad's 1982 firebird

Junkers....
-1984 camaro I had 8 years ago when I was 17

-Dad's 1984 camaro that he built before he found his firebird, then he swapped most parts from camaro to firebird

1986 camaro parts car that I bought for $500 to get the harwood 4" cowl hood, PRM intake, good door panels, t tops, headliner, etc.

1978 Trans AM that needs total restore that I bought about 5 years ago

 

thats a lot of f bodies to own

I salute ya.

 

ive got two and going to look at two more this sunday

 

Here is my interior, I'm still looking for black seat belts for the back and then its finished

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

 

quick question 1fastz how come u got 2 tachs?

 

The one in the dash is factory and then I added a Monster Autometer 5 inch tach. As most know the factory tachs are not totally accurate. Thats way I added the 5 inch tach.

 

JTY, tell me about the blue lighting, it looks kicking....Thanks, Tom

 

Mono racing recliners- custom brackets. The sparco/momo brackets will set these and most other aftermarket seats about 2 inches taller than the factory seats. I customized the brackets to fit only 1/2 inch taller than my factory seat. I am 6'4 and have plenty of head room and can get my 15 year old daughter who is 5'5 sitting behind me with decent legroom and feet flat on the floor with both of us comfortable. The nice thing on these seats is they are thinner front to back in the backresrt area than the factory seats by 1 1/2 inches- thats major when it comes to legroom. I also lined the entired car with Dynamat- even on the ceiling. The car feels so much more luxurious inside and solid feeling. Also, notice the factory shoulder belts route through the guide holes of the seats.http://www.cardomain.com/member_page...2_123_full.jpg
http://www.cardomain.com/member_page...2_125_full.jpg

 

I only have a few pics right now, but here's the dash and door panels. The front buckets are '99 Firebird seats, and front and back are like the door panels (micro-fiber inserts).

 

i like ive been debating on doing a custom gauge setup like that on my t/a but im not to great with electrical gizmos and i dont wanna screw anything up bit nice job man

 

Thanks I have to admit, I didn't do the wiring myself; just the speaker grills and aluminum panels.

I just had a photo shoot for High Performance Pontiac, so you can see more of it this fall.

 

Get out!

What issue will it be? Do you know?

 

I have my 89 trans am but only half finished from gray to black and gray.... I have the 4th gen rear seat in and I painted the dash and shifter trim pieces and changed the carpet.... Ill post pics when done.....

 

Here's something I had done to my 92 RS. The interior was all gray and the driver's seat was showing it's usual wear on the edge near the door where I slide in and out. It was less expensive to go custom than to use OEM material, I even had some embroidery work done on the headrests.

 

I actually got them from Year One, and they're made for our body style, so the fit is like a glove.

Here's a few of mine: (don't mind the headlight switch **** missing...
I just got done putting the dash back together this morning from my guage cluster swap,
and haven't put the **** back on yet...)

 

It's been like this for a while now but here it is! Click on the pics for a larger image.

 

[IMG][/IMG]

 

a couple of pics of my interior

 

Heres mine completely stock.Enjoy
http://i14.photobucket.com/albums/a3...4/IMGP8414.jpg
http://i14.photobucket.com/albums/a3...4/IMGP8410.jpg
http://i14.photobucket.com/albums/a3...IMGP8409-1.jpg
http://i14.photobucket.com/albums/a3...4/IMGP8419.jpg
http://i14.photobucket.com/albums/a3...4/IMGP8423.jpg
http://i14.photobucket.com/albums/a3...4/IMGP8436.jpg
http://i14.photobucket.com/albums/a3...4/IMGP8088.jpg

 

[IMG]

 

Straight from the factory...

 

 

Best pic I got. Still needs a headliner and door top plastics.

 

That interior is HOT!!!!

Post some more pics!

 

here is my interior in my 89 trans am... I will have the front buckets from a 95 camaro in soon....

 

New Acc carpet, steering wheel recovered, 145mph speedo, all seats and door panels steam cleaned, new Hurst shifter, new headliner,seatbelt recall rebuild,floor soundproofed,new stereo,new sun visors,all window sweeps and trim replaced.

 

nice interior badnblk, is that a fiberglass dash, how did u get/make that, that dash looks sweet

 

Sorry I missed this post for so long. The article just got published, it's the OCtober issue of HPP but it's in stores now

 

Original, unrestored interior:




Here's the rest of the car:

 

My 91 Rs Iroc-Z clone (originally manual locks and windows) All the work done myself...

 

Sorry, 2 more pics...

 

I redid my interior, with leather seats from a 99 Camaro and new carpet and headliner from stockinteriors.com.

 

my 92 never done much but keep it up and the wood grn

 

Here's mine. I really need new carpet and headliner.