Post some of those sexy interiors
Thread Starter
Junior Member
Joined: Jun 2006
Posts: 62
Likes: 0
From: Bayshore
Car: 1992 RS Camaro
Engine: 305 tbi
Transmission: 700r4
Post some of those sexy interiors
Come on guys lets see those sexy interiors that you have put your work into or purchased your third gens with. Im sure everyone wants to see those custom jobs, or perfect and clean interiors. Heres mine its nothing special yet. but i have some ideas for it and still want to see some others, or hear some that you guys may have for your cars. dont be shy
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
wow that interior was spotless!! nice job
no good pix for mine cause im at college but mine is a little less stock lol
here goes the list.....
custom carpet with z28 custom fit embroidered mats, z24 high bulster seats, leds in every vent, 24in neon for the rear, rear seat delete with 2 6.5in sony xplodes, leds projecting on rear seat delete, 2- 10in pioneer subs in a custom made box that fits in the well, full custom crushed velvet interior on the head liner and all rear plastic, chevy symbol embosed in the custom sun visors, white back guages and shifter and HVAC, black light for the guages, led interior light swap
thats a start lol
i wished i had better pix but im about 3 hours away from my baby right now

no good pix for mine cause im at college but mine is a little less stock lol
here goes the list.....
custom carpet with z28 custom fit embroidered mats, z24 high bulster seats, leds in every vent, 24in neon for the rear, rear seat delete with 2 6.5in sony xplodes, leds projecting on rear seat delete, 2- 10in pioneer subs in a custom made box that fits in the well, full custom crushed velvet interior on the head liner and all rear plastic, chevy symbol embosed in the custom sun visors, white back guages and shifter and HVAC, black light for the guages, led interior light swap
thats a start lol
i wished i had better pix but im about 3 hours away from my baby right now

Last edited by chevylover5; Feb 1, 2007 at 07:29 PM.
Senior Member
iTrader: (1)
Joined: Jun 2006
Posts: 692
Likes: 1
From: Oviedo,Florida
Car: 86' Trans am
Engine: 85 LG4-non cc carb(building a 350)
Transmission: Rebuilt 700R4,vette servo,2200stall
Axle/Gears: 2.73 Posi
heres mine nothing special just swaped out the gray and put in all black interior from hawks
Senior Member
iTrader: (1)
Joined: Jun 2006
Posts: 692
Likes: 1
From: Oviedo,Florida
Car: 86' Trans am
Engine: 85 LG4-non cc carb(building a 350)
Transmission: Rebuilt 700R4,vette servo,2200stall
Axle/Gears: 2.73 Posi
2 more of the new headliner (i no the domelights backwards)
Senior Member
Joined: Nov 2006
Posts: 651
Likes: 0
From: Adelaide, Australia.
Car: 1984 Trans-Am WS6
Engine: WAS: 5.0HO, SOON: ZZ383-425HP.
Transmission: 700R4 with shift kit
heh it aint realy clean but its a lill different from stock :P Sorry the pics are so big (how do i insert the "Attached Thumbnails"?)






Last edited by VenomX-87; Feb 3, 2007 at 01:32 AM.
Trending Topics
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
dude right hand drive NICE
i wouldnt mind havin one of those in the US!
thatd be sweet to have at sum car shows
i think its illegal tho idk
i wouldnt mind havin one of those in the US!
thatd be sweet to have at sum car shows
i think its illegal tho idk
Senior Member
Joined: Nov 2006
Posts: 651
Likes: 0
From: Adelaide, Australia.
Car: 1984 Trans-Am WS6
Engine: WAS: 5.0HO, SOON: ZZ383-425HP.
Transmission: 700R4 with shift kit
yeah, over here if the car is not 25 y/o it has to be converted from LHD to RHD. Coz if it is over 25 y/o it is clasified as a clasic so it don't need to be modified.
Thread Starter
Junior Member
Joined: Jun 2006
Posts: 62
Likes: 0
From: Bayshore
Car: 1992 RS Camaro
Engine: 305 tbi
Transmission: 700r4
nice interiors so far guys, and i dont think the right hand drive is illigal in the us because i see a few kids with skylines with rhd all the time up at the races and cruising around
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 830
Likes: 0
From: Victoria BC Canada
Car: 87 Camaro IROC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.23
lol every time i see a right hand drive camaro im like "dam that guys an awesome customizer" but then i realize the brits got their hands on our cars and im like "crud...i wanna sell my camaro now
"
lol j/k...im still stunned by right hand drive tho
" lol j/k...im still stunned by right hand drive tho
Supreme Member

Joined: Sep 2005
Posts: 2,151
Likes: 0
From: Osceola Indiana
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn


heres mine all stock wish I had some better pics I dont think it looks to bad for having 93,000 miles, and yes I have a steering wheel cover was on the car when I bought, and the only reson its still there is cause the wheel is all cracked underneath
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
heres a few pix of my friend lizs, "88FormulaChick", ta
and no shw didnt do this monstrasity she bought it like this

and no shw didnt do this monstrasity she bought it like this

Supreme Member
Joined: Dec 2005
Posts: 1,244
Likes: 1
From: Texas City, Texas Area
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Chevylover5 where did you get your custom fit floor mats????? Do they fit good on the passenger side???? How much were they????? Thanks for any info...Tom
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
lol i double that one
and tom, i bought them from bluezee, but i believe he bought them from hawks... and yea they both fit like a dream... perfect
http://www.hawksthirdgenparts.com/in...ROD&ProdID=513
Last edited by chevylover5; Feb 5, 2007 at 04:31 PM.
Joined: Sep 2002
Posts: 3,685
Likes: 10
From: PA
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
Still needs some work. And Im still debating on whether or not I want to swap everything over to black on the inside.... Im installing a roll cage soon (8pt)...and Ide like to recarpet. So I gotta decided in the near future.
These pics are shortly after my swap...so there might be a few odds and ends out of place. Like the insurance and registration cards sticking up from the glove pouch.
Enjoy!



Justin
These pics are shortly after my swap...so there might be a few odds and ends out of place. Like the insurance and registration cards sticking up from the glove pouch.
Enjoy!



Justin
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 830
Likes: 0
From: Victoria BC Canada
Car: 87 Camaro IROC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.23
Supreme Member
iTrader: (3)
Joined: Sep 2005
Posts: 1,685
Likes: 3
From: MD
Car: '88 IROC-Z medium orange metallic
Engine: L98
Transmission: 700R4
Axle/Gears: 3.27
----------
Uhhh, any harness will work. You don't need a specific one to go with certain seats. FYI you're going to look like a doofus driving around with a harness unless the car's got some *****. Plus it's going to get on your nerves strapping in every time you drive the car. I guess I'm trying to say don't get one unless you need it.
Last edited by Dialed_In; Feb 7, 2007 at 07:14 PM. Reason: Automerged Doublepost
Supreme Member
iTrader: (1)
Joined: Dec 2004
Posts: 2,492
Likes: 0
From: Arcadia ,Ca
Car: 82 firebird s/e 83 Trans Am
Engine: 5.0L 305ci 4b carb.....CFI
Transmission: TH200C....700R4
Hey mnformula.Thats a sharp interior,ans so is everyone elses who posted.
Formula: For your back hatch plastics what material did you use and how long did it take you?
Formula: For your back hatch plastics what material did you use and how long did it take you?
Joined: Sep 2002
Posts: 3,685
Likes: 10
From: PA
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
MNformula350: I was wondering if we'd see pics of that interior. Ive always liked that, and Ive considered doing it... Looks great!!!
Justin
Justin
Supreme Member
iTrader: (9)
Joined: Sep 2001
Posts: 2,984
Likes: 37
From: North Central Indiana
Car: 86 IROC
Engine: 383
Transmission: TKO 600
Axle/Gears: 3.54 Dana 44 IRS
Pro 5.0 shifter (TREMEC TKO600)
new ACC carpet
stock Fiero seats covered in NOS material.
I also like my tach and shift light in the cigarette lighter position.
It needed vaccumed out but I took the pics in a hurry last summer.
https://www.thirdgen.org/forums/body...ered-look.html
new ACC carpet
stock Fiero seats covered in NOS material.
I also like my tach and shift light in the cigarette lighter position.
It needed vaccumed out but I took the pics in a hurry last summer.
https://www.thirdgen.org/forums/body...ered-look.html
Senior Member

Joined: Apr 2001
Posts: 798
Likes: 3
From: Powder Springs, Georgia, USA
Car: 1992 Black Z28 Hardtop
Axle/Gears: 2002 10 bolt w/3:23
MNformula350, and AdmAnt13 those are some great looking interiors. I love the 4th gen retrofits. And, the fabric covered plastic panels on MNformula350's ride is very nice. What kind of fabric did you use. AdmAnt13 I'm not very familiar with Firebird interiors but is that silver instrument panel bezel stock. Looks sharp. I wish I had the time to customize my Z28 like these.
All normal bulbs removed and changed to LEDS, also two tft screens 7" and 3.6" with DVB-T tuner and divx usb player:



http://oh1jty.toimii.net/auto/camalcd/img_3810.jpg



http://oh1jty.toimii.net/auto/camalcd/img_3810.jpg
Junior Member
Joined: Jan 2004
Posts: 59
Likes: 0
From: Leeds, UK
Car: 1988 Pontiac GTA
Engine: 305
Transmission: Auto
Thanks man, love you too!
Member
iTrader: (10)
Joined: Jun 2002
Posts: 270
Likes: 0
From: Taylors Falls, Minnesota
Car: 1983 Z/28
Engine: Edelbrock 355
Transmission: T-56
Axle/Gears: 3.42/Zexel/PBR

----------
I no longer have the console clock however
Last edited by livewire; Feb 19, 2007 at 06:44 PM. Reason: Automerged Doublepost
Member
Joined: Nov 2004
Posts: 316
Likes: 0
From: North Jersey
Car: 1990 Pontiac Firebird
Engine: 3.1 V6 soon to be gone
Transmission: 700r4 Automatic soon to be a T56
Member
Joined: Mar 2006
Posts: 438
Likes: 0
From: Calgary AB.
Car: 85 Camaro iroc
Engine: 305ci HO
Transmission: T-5
Axle/Gears: 3.73
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Here's mine.... a looong term work in progress..
BTW, any one have the pics of the one with the Audi TT seats? That was real sweet!

Ken
BTW, any one have the pics of the one with the Audi TT seats? That was real sweet!

Ken
Supreme Member
iTrader: (2)
Joined: Aug 2001
Posts: 1,081
Likes: 3
From: Peoria, IL USA
Car: 91 GTA
Engine: 377ci
Transmission: T56
Axle/Gears: QP Ford 9" 3.70s
I suck at taking pictures. I got some matchin black floor mats made too, but I would have to go out and take more sucky pictures.
Oh and I whole heartedly disagree with the statement a car needs "to have some *****" in order to have a five point. Any car and driver can greatly benefit from a properly installed racing harness. The less time your butt spends navigating the seat the more time you can spend on navigating the car. Especially if you autocross!
Oh and I whole heartedly disagree with the statement a car needs "to have some *****" in order to have a five point. Any car and driver can greatly benefit from a properly installed racing harness. The less time your butt spends navigating the seat the more time you can spend on navigating the car. Especially if you autocross!
Last edited by DAVECS1; Feb 20, 2007 at 07:37 PM.
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Here is how mine looked last summer...


I have some changes going on for this season.


I have some changes going on for this season.


















