I want to restore the seats in my 91 anyone know where I can get new seat foam? Also I want to get rid of my stock steering wheel and replace it with a Grant is there a way to do that with out the infl rest light coming on? Thanks in advance.

-JD

 

....I know there are thousands of posts in here about removal of the airbag but what I was wondering was if there was a way to remove the airbag without the light coming on at all. For example the same way VATS is bypassed by using a resistor matched to the value of the resistance in the pellet in your key. I was thinking about removing the airbag and measuring its resistance in ohms and putting a resistor in line tricking the computer in to thinking that the airbag is there and everything is ok. Any thoughts?
-JD

(sorry about the double post)

 

did you ever find a place to get seat foam? I need some really bad!! recovering my seats and foam is shot!

 

...air bag removal.. warning light display.

Disconnect the battery. Remove the panels for access to the underside of the steering column. Disconnect the yellow ars splice (wires to the air bag).
Remove the headlight switch stud by depressing the small release button on the underside of the headlight switch. Tilt and lower the steering wheel then remove the cluster trim ring. Remove the cluster. Remove the ars light bulb. Put it all back together. Then, remove the air bag and steering wheel.

Replace the steering wheel with your selection.

 

hi, i have replaced my drivers seat foam on both my camaros with a passenger seat from a junkyard,also you can switch the material around too,it`s not that bad just go slow and it`s pretty easy. Both my seats look awesome. If you dcide too do that let me know i will help you out