4th gen seats on a 3rd gen POWER SEAT track?
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 2008
Posts: 634
Likes: 3
From: Massachusetts
Car: 1987 IROC Z w/T-Tops
Engine: 305 TPI
Transmission: Automatic
Axle/Gears: G92
4th gen seats on a 3rd gen POWER SEAT track?
Hi All,
I just picked up a set of 4th gen seats and prior to installation, I have a question;
My current seat (Camaro) is power, on a power track.
The new drivers seat is manual, with just the 4 bolt frame.
Has anyone installed a 4th gen seat on a 3rd gen power track? If so, what, if any, modifications need to be made?
Thanks in advance!
I just picked up a set of 4th gen seats and prior to installation, I have a question;
My current seat (Camaro) is power, on a power track.
The new drivers seat is manual, with just the 4 bolt frame.
Has anyone installed a 4th gen seat on a 3rd gen power track? If so, what, if any, modifications need to be made?
Thanks in advance!
Last edited by majobis; Apr 10, 2009 at 10:39 PM.
Joined: Nov 2005
Posts: 2,346
Likes: 1
From: Naples, FL
Car: 91 RS Camaro, 75 L82 Corvette
Engine: LO3, 383 Stroker
Transmission: 700R4, TH400
Axle/Gears: 4th gen 3.23 posi/LS1 discs, stock
Re: 4th gen seats on a 3rd gen POWER SEAT track?
Yes. I have my 4th gen seats on my stock 3rd gen tracks.
Supreme Member
iTrader: (3)
Joined: Sep 2006
Posts: 1,531
Likes: 1
From: sunny so cal.
Car: 1990
Engine: 305
Transmission: 700r4
Axle/Gears: stock
Re: 4th gen seats on a 3rd gen POWER SEAT track?
i initially misread you comment. it is a direct bolt in and they fit just right. but the electronics are needed. and i bought the harness that communicates with the passenger seat. then i direct wired the power into the 30 amp fuse block from the factory harness.
i dont know if you have the same plug in for your original power seats but if you do its the same for all dual power seat combs. if that is the case you are already pluged into the 30 amp fuse and you should be ok.
i dont know if you have the same plug in for your original power seats but if you do its the same for all dual power seat combs. if that is the case you are already pluged into the 30 amp fuse and you should be ok.
Member
Joined: Aug 2002
Posts: 408
Likes: 0
From: colorado
Car: 84 Camaro, 90Firebird, 87Transmaro
Engine: custom 5.7, 5.0 , 6.5 Turbo diesel
Transmission: 4spd, auto, auto
Axle/Gears: 2.77 posi
Re: 4th gen seats on a 3rd gen POWER SEAT track?
where can you find dual power seat combos? I know of a trans am with electric pass. seat but it was just for lumbar support
The motors for the pass seat fit on the right side of third gens without losing head room?
The motors for the pass seat fit on the right side of third gens without losing head room?
Supreme Member
Joined: Mar 2003
Posts: 1,615
Likes: 37
Re: 4th gen seats on a 3rd gen POWER SEAT track?
Sorry to bring this one back from the dead, but I had this question too.
Looks like the power 3rd gen track will fit on the 4th gen seats. What about the 3rd gen electronic switches? Are they able to be mounted to the 4th gen seat?
I'm not even sure what the 4th gen seat switches look like? Are they similar?
Looks like the power 3rd gen track will fit on the 4th gen seats. What about the 3rd gen electronic switches? Are they able to be mounted to the 4th gen seat?
I'm not even sure what the 4th gen seat switches look like? Are they similar?
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
