Guages install with out chopping your Dash
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Guages install with out chopping your Dash
had a few Pm's about how i add all the Guages.
i used all the stock screw Mt spots. in some places i had to make a sheet of alum plate to match up with the stock screw Mt.. then Bolt the Bezl to the alum sheet..
every Guage in this car could be removed and the stock Dash would not have a Mark on it.. i did it this way .why? well the car was brand new back in 92.. and i did not what to chop it up.. on the inside..
the only part i had to Cut was for the shifter..pre B&M 100%
everything in this car still works. I would not have it any other way!
5" monster tach is solid
i used all the stock screw Mt spots. in some places i had to make a sheet of alum plate to match up with the stock screw Mt.. then Bolt the Bezl to the alum sheet..
every Guage in this car could be removed and the stock Dash would not have a Mark on it.. i did it this way .why? well the car was brand new back in 92.. and i did not what to chop it up.. on the inside..
the only part i had to Cut was for the shifter..pre B&M 100%
everything in this car still works. I would not have it any other way!
5" monster tach is solid
Member
Joined: Sep 2009
Posts: 329
Likes: 0
From: Lower Burrell, Pa
Car: 86 Iroc-Z28 Camaro/84 BMW M Power
Engine: 350TPI/ S50
Transmission: t-5 five speed/ 5 speed
Axle/Gears: 3.42 posi/ 3.73LSD
Re: Guages install with out chopping your Dash
Just a question here. What is with the Frilly Tachometer?
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Guages install with out chopping your Dash
5" monster tach is solid
Last edited by articwhiteZ; Sep 24, 2009 at 08:00 PM.
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Member
Joined: Sep 2009
Posts: 329
Likes: 0
From: Lower Burrell, Pa
Car: 86 Iroc-Z28 Camaro/84 BMW M Power
Engine: 350TPI/ S50
Transmission: t-5 five speed/ 5 speed
Axle/Gears: 3.42 posi/ 3.73LSD
Re: Guages install with out chopping your Dash
Just so you know Your my New Hero.LOL. Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Guages install with out chopping your Dash
that makes me all
warm and Fuzzy
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
The_Phoenix
Interior Parts for Sale
12
Feb 4, 2016 07:10 AM