Just tried to the hatch pull down(whole unit) out of my parts car into my car. Somthing isnt right with the wiring, does anybody have some good detailed pictures of all of the wiring for me? mainly the little white wire that come off the relay, and the whole circuit that connects to.

Im missing something just cant figure out what!

 

https://www.thirdgen.org/forums/inte...-identify.html

The attachment in post #21 may be the most help:
https://www.thirdgen.org/forums/post...08-post21.html

 

ALMOST! ugh, thanks though!

the white wire that splits off the relay, in the parts car it plugged into a black/orange wire that ran into a two prong connector that had two red/white wires on the opposite prong, one came from the wire loom, and the other was cut about 6 inches down.

in my car the red/white wire runs into a very different two prong connector and into a blue wire on the pull down assy. with no other wires attatched to the connector.

 

just found this! helps alot!

http://www.austinthirdgen.org/mkport...wn_release.jpg