Here's the Plan.
Thread Starter
Senior Member
iTrader: (2)
Joined: Jul 2010
Posts: 500
Likes: 1
From: Shreveport, LA
Car: 1982 SC/1984 Z28
Engine: 305 4BBL/305 4BBL H.O.
Transmission: 700R4/700R4
Axle/Gears: 4th Gen 3.23 Posi/3.73 10 Bolt
Here's the Plan.
I got a brilliant Idea for my Interior and it's Cheap for being a New interior. Recently i obtained and installed front seats from a '95 Camaro. Good thing too. Right after i did, they Crushed that car. I was going to go back for the Back seat, but that's not possible now. Is the back seat EXACTLY the same? Here's my Proposal:
My Car is Red, so my Interior will be Black AND Red.
Look at the Red and black seats in this pic
http://www.hawksthirdgenparts.com/ca...atherlike.aspx
I could use some Red Door Panels with Black handles.
http://www.hawksthirdgenparts.com/ca...placement.aspx
All the Plastic Trim will be Black and the Carpet will be Black.
If the Back seats are exactly the same, i can just order that upholstry kit and go to town. Otherwise, i need to see if i can find a back seat out of a 93-96 Camaro. It shouldn't be hard though.
My Car is Red, so my Interior will be Black AND Red.
Look at the Red and black seats in this pic
http://www.hawksthirdgenparts.com/ca...atherlike.aspx
I could use some Red Door Panels with Black handles.
http://www.hawksthirdgenparts.com/ca...placement.aspx
All the Plastic Trim will be Black and the Carpet will be Black.
If the Back seats are exactly the same, i can just order that upholstry kit and go to town. Otherwise, i need to see if i can find a back seat out of a 93-96 Camaro. It shouldn't be hard though.
Member

Joined: Apr 2009
Posts: 265
Likes: 1
From: Spokane, Wa.
Car: 88 Camaro
Engine: 416 Stroker LS
Transmission: Magnum F
Axle/Gears: 4.11
Re: Here's the Plan.
This is exactly my car atm. Everything black except for red seats and red door panels but with black handles.
I'll take a few pics tomorrow for ya so you can get an idea. Even though my seats are stock and trashed, about to replace them though.
I'll take a few pics tomorrow for ya so you can get an idea. Even though my seats are stock and trashed, about to replace them though.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Re: Here's the Plan.
I got a brilliant Idea for my Interior and it's Cheap for being a New interior. Recently i obtained and installed front seats from a '95 Camaro. Good thing too. Right after i did, they Crushed that car. I was going to go back for the Back seat, but that's not possible now. Is the back seat EXACTLY the same? Here's my Proposal:
My Car is Red, so my Interior will be Black AND Red.
Look at the Red and black seats in this pic
http://www.hawksthirdgenparts.com/ca...atherlike.aspx
I could use some Red Door Panels with Black handles.
http://www.hawksthirdgenparts.com/ca...placement.aspx
All the Plastic Trim will be Black and the Carpet will be Black.
If the Back seats are exactly the same, i can just order that upholstry kit and go to town. Otherwise, i need to see if i can find a back seat out of a 93-96 Camaro. It shouldn't be hard though.
My Car is Red, so my Interior will be Black AND Red.
Look at the Red and black seats in this pic
http://www.hawksthirdgenparts.com/ca...atherlike.aspx
I could use some Red Door Panels with Black handles.
http://www.hawksthirdgenparts.com/ca...placement.aspx
All the Plastic Trim will be Black and the Carpet will be Black.
If the Back seats are exactly the same, i can just order that upholstry kit and go to town. Otherwise, i need to see if i can find a back seat out of a 93-96 Camaro. It shouldn't be hard though.
Thread Starter
Senior Member
iTrader: (2)
Joined: Jul 2010
Posts: 500
Likes: 1
From: Shreveport, LA
Car: 1982 SC/1984 Z28
Engine: 305 4BBL/305 4BBL H.O.
Transmission: 700R4/700R4
Axle/Gears: 4th Gen 3.23 Posi/3.73 10 Bolt
Re: Here's the Plan.
Thank YOU! I'm not ready to pony up for some covers yet, but i will in the near future. Actually, I was wanting a Re-upholstery kit. I'm looking for something that uses Hog Rings and that you have to remove the old Upholstery first. The FIRST thing i should do though is Replace the Carpet. Should i wait until the Car is painted to do the Interior?
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Re: Here's the Plan.
The seat covers that I'm referring to are a re-upholstery kit. They replace the fabric that's currently on the seats. They come with the hog rings, pliers, and installation instructions.
Whether or not you wait until the car is painted is up to you. When the car gets painted, the door openings will be masked off anyway, so the interior shouldn't be effected.
Whether or not you wait until the car is painted is up to you. When the car gets painted, the door openings will be masked off anyway, so the interior shouldn't be effected.
Thread
Thread Starter
Forum
Replies
Last Post





