interior tools???
Thread Starter
Junior Member
Joined: May 2008
Posts: 26
Likes: 0
From: yuma, AZ
Car: 1991 camaro rs. 1992 camaro z28
Engine: 3.1 liters/V6. & 305 v8
Transmission: automatic
interior tools???
i need to take apart my steering wheel and tighten the bolts and i also need to replace the window motors. what tools do i need for both of these projects. no mechanic here so im desiding to give it a shot myself so as much help as possible is needed and very greatful.
and the window cushions.can i just find those at any checkers or autozone or do i have to go online and buy them?
and the window cushions.can i just find those at any checkers or autozone or do i have to go online and buy them?
Member
iTrader: (3)
Joined: Feb 2005
Posts: 118
Likes: 0
From: CU, IL
Car: 89 Camaro RS
Engine: Carb'd 350
Transmission: 700r4
Axle/Gears: 3.70
Re: interior tools???
There is a great write up in the Tech Articles section what will walk you through this. For the steering wheel you will need a steering wheel puller and if you are tightening the "four screws" that i think you are talking about a slide hammer or a pin puller like this one will be needed:
http://www.amazon.com/OTC-REMOVER-ST.../dp/B000I16PPK
For the door panels you shouldn't NEED any special tools but this tool will help you out with getting the door cards off without damaging them.
http://www.amazon.com/AES-Industries.../dp/B0025EQMBK
http://www.amazon.com/OTC-REMOVER-ST.../dp/B000I16PPK
For the door panels you shouldn't NEED any special tools but this tool will help you out with getting the door cards off without damaging them.
http://www.amazon.com/AES-Industries.../dp/B0025EQMBK
Thread
Thread Starter
Forum
Replies
Last Post




