Power Door Locks not working
Thread Starter
Joined: Mar 2007
Posts: 1,698
Likes: 3
From: NE Pennsylvania
Car: 85 Iroc-Z
Engine: 383 TPI Procharger D1SC
Transmission: TKO600
Axle/Gears: Strange S60 3.73
Power Door Locks not working
They power door locks in my car dont work. It sounds like they are working when you hit the lock buttons, but they don't actually lock or unlock. Are the motors weak or is something else faulty?
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: Power Door Locks not working
1. Get into the door and clean and lube EVERYTHING.
2. Remove the driver's side kick panel and make sure that the screw holding the relay box to the body is tight. The relay grounds through that screw, so if it's loose, no locks...
2. Remove the driver's side kick panel and make sure that the screw holding the relay box to the body is tight. The relay grounds through that screw, so if it's loose, no locks...
Joined: Oct 2011
Posts: 475
Likes: 8
From: Houston, TX
Car: 1989 GTA, 2004 Z06, 2008 Expedition
Engine: L98, LS3, 5.4L
Transmission: 700R4, MN6, Auto
Axle/Gears: 3.23, 3.42, ?
Re: Power Door Locks not working
Door lock actuators are a common issue also. If they don't work out perfect after lubricating all the linkage, just replace the actuators. You can buy them aftermarket cheap.
Re: Power Door Locks not working
We carry new door lock actuators for you car. Here's a link to them if you would like to see what we have. http://www.1aauto.com/1A/DoorLockAct...ampaign=1ATony
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM







