ctsv oil pan stock k member with hawks mounts?
Thread Starter
Member
Joined: Jul 2005
Posts: 372
Likes: 0
From: Indianapolis,IN
Car: 1991 B4C Camaro RS
Engine: 370 lsx ls3 heads victor jr w/carb
Transmission: TH400 w/brake coan 8"4500-4800 stal
Axle/Gears: Moser 9" locker w/ 4.11's
ctsv oil pan stock k member with hawks mounts?
I know alot of you guys are running a f body pan. I have the oprotunity to get ctsv. pan baffle pickup tube dipstick and tube brand new. The ctsv pan hangs down about 1/2 to 3/4 inch lower than body pan and appears to have more clearance where need ed for k member.
Anyone have any pics of one installed?
Anyone have any pics of one installed?
Thread Starter
Member
Joined: Jul 2005
Posts: 372
Likes: 0
From: Indianapolis,IN
Car: 1991 B4C Camaro RS
Engine: 370 lsx ls3 heads victor jr w/carb
Transmission: TH400 w/brake coan 8"4500-4800 stal
Axle/Gears: Moser 9" locker w/ 4.11's
Re: ctsv oil pan stock k member with hawks mounts?
the specs listed on ls1tech.com show the deepest part of the pan being 1 3/4 inches deeper than the f body pan. f body pan is 5' tall ctsv pan is 6 3/4 tall.
do you still think there is room to run this pan? i am at stock ride height.
do you still think there is room to run this pan? i am at stock ride height.
Joined: Dec 1999
Posts: 3,544
Likes: 19
From: WI,USA
Car: 89 FORMULA 350, 91 Z28 Convertible
Engine: ls1, LB9
Transmission: t56, Auto
Axle/Gears: S60/ 3.73
Re: ctsv oil pan stock k member with hawks mounts?
I guess its your call. the f-body pan sits about level with the center of the k-member. so anything deeper will hang lower.
Thread
Thread Starter
Forum
Replies
Last Post
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 21, 2015 09:32 AM
