Fair deal? 5.3 and 4l60e?
Thread Starter
Junior Member
Joined: Apr 2015
Posts: 32
Likes: 0
From: MN
Car: 1986 IROC Z
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.23
Fair deal? 5.3 and 4l60e?
Okay so i have been looking for a ls motor for a while now and i stumbled upon a craigslist add that had a 5.3 and a 4l60e out of a silverado. Supposedly has new trans seals. He is asking 1300 for both, i am going to try to talk him down a bit. But i wanted to know if this is a fair deal? Both have 143k miles on them. Also comes with motor mounts for a s10/camaro.
Thanks!
Thanks!
Joined: Sep 2005
Posts: 27,959
Likes: 2,469
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Fair deal? 5.3 and 4l60e?
Seems at the high end of the range but not out of it. If you can see/hear it run, if it has any recent work done to it, etc., might not be too bad.
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: Fair deal? 5.3 and 4l60e?
The S10 motor mounts probably won't be of any use to you, but you could probably get a couple bucks selling them.
If the deal doesn't include the PCM and harness, the price is too high. Hopefully the Silverado was 2WD.
If the deal doesn't include the PCM and harness, the price is too high. Hopefully the Silverado was 2WD.
Senior Member
iTrader: (1)
Joined: Jun 2009
Posts: 564
Likes: 0
From: N.E. Ohio
Car: 87 Gta
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.42
Re: Fair deal? 5.3 and 4l60e?
I got mine from a local junkyard. I got to hear it run. Plus it came with a harness and pcm. Only paid 1100 with tax. I would think that's a rather high price for a craigslist deal
Thread Starter
Junior Member
Joined: Apr 2015
Posts: 32
Likes: 0
From: MN
Car: 1986 IROC Z
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.23
Re: Fair deal? 5.3 and 4l60e?
He wanted 1300 for the motor, tranny, motor mounts, ecm, and harness. 140k
I talked him down to 1000 for tranny motor and harness, ecm. (it doesn't have an intake or accessory drives) Supposedly he was going carb but plans changed.
It was a 2wd. I am going to pick it up next weekend if i follow through with it lol
I talked him down to 1000 for tranny motor and harness, ecm. (it doesn't have an intake or accessory drives) Supposedly he was going carb but plans changed.
It was a 2wd. I am going to pick it up next weekend if i follow through with it lol
Thread
Thread Starter
Forum
Replies
Last Post
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 25, 2015 03:51 PM








