I had to remove the pics per the moderator because I posted more then the limit so here is a link to the pics that were posted. http://www.cardomain.com/ride/2969412/1

 

edited

 

edited

 

If you look at the spoiler pics you can see where the paint line on the stock spoiler is where the car was repainted. I know some people have asked if it was different at the base, these are good pics that say yes and by how much.

 

wow car looks awesome! i really want that wing

 

The attached (uploaded) image limit is three.
Please respect the rules and remote host images if you wish to post more.
You decide which three you wish to leave attached.

Thank you kindly.

 

I like the way it follows the rear tail light angle. That's what I don't like about the 91/91 Hi-Rise Z28 pedestal wing.

 

Looks good! Lowering springs? If so, which ones?

 

Wow, that's awesome! Nice and clean.

 

My car is still at the body shop and I haven't seen the spoiler on it yet but after seeing your pics it just makes me even more confident I did the right thing in ordering that spoiler. Great lookin ride. Oh and 85_zed28 it says in his thingy they are eibach sportlines (1.6" drop-ish) for lowering springs.

 

Copy that, ill make the changes now

 

Thanks everyone, loud91rs you'll like the wing! Just be careful when you wash and dry your car so that your sponge or towel doesn't snag the edge of the side spoiler that runs down the tail lights. It could (if your too rough) break. I snaged it a couple times but luckly didn't break anything.

It is lowered with eibach sportlines. it's about a 1.6 inch drop up front and 1.3in the back. looking at it though it does look more like 2" and 1.5.

ill get better pics of the rims but they are polished up and look better then the pics that I have up show.

Thanks again!

 

car looks super clean. i dig it.

 

Looks great! How was the fitment on the wing?

 

Well, you didn't have to remove all of them.
But, thank you.

Car does look good btw.

 

Well, here is the deal on that, I didn't have to do alot of work to get it to fit righ but there were some things i had to do to make it fit my car. One of them was to oblong (if that makes sense) a couple of the stock mounting holes for all three parts of the wing. No big deal if you have a drill. The second thing I had to do was sand off material of the two side parts of the wing to make it fit flush with the body. I gave it a try but never trying anything like that before I let the body shop that painted the wing do it for me. I didn't want to mess it up seeing how much I paid for it. Good thing is the body shop didn't charge extra for it. It fits pretty good now and im happy with it.

I talked to bruce at hawks about the fitment of the wing out of the box and he explained to me that some work to fit the wing just right isn't out of the norm. I understand that 100% and im thankful that he took in consideration that there wasn't much of a market in 5inch spoilers/wings and made one available to us. Im very happy with what I got and would do it again.
----------
Thanks! I know I didn't have to remove all of them but I had alot of pics I wanted people to see so I took your advice and hosted the pics from another site. I didn't mean to break the rules, I really didn't understand if 3 pics was the limit per thread or per post. I thought if it would let me post more then 3 in one thread using seperate posts then it would be ok. My bad and now I know

 

very nice...looks good lowered

 

Hey guys, I updated my cardomain site with the polished rims, also I added the method of which I used to polish them. Everything was done by hand!

 

Congrats on the car.

Great job on the rims!

 

looks nice man, i think an SS hood would really compliment it though

 

Looks good. Your rear springs look like stock ride height to me. Did you put in the isolators when you installed the sportlines?

 

Looks really clean. I think I'm going to polish my wheels now.

 

If your talking about the rubber seat the stock springs were sitting on then yes I retained them and used them with the eibach. Looks lowere to me though )

RWDTECH, that SS hood is looking good to me right now. I have to wait until I get back from over seas in Aug. at that time the IROC hood will be replaced, Thanks!

JohnC, Do it!! it's worth it but it is hard work. if you have down time with your IROC then it shouldn't be a problem. But you can't do all four really quick. It took me three long days per rim, however my rims were pretty bad off to start with. It may take someone else less time.

 

Car looks good.

You need to get a can of duplicolor "Gloss Black" and a can of clear coat. And paint those headlight buckets with it. That is the only faded part of your car now lol.

 

loveing the wing to

 

that looks awesome man.. very nice.

 

Car looks great, nice color! I got one of those 5" spoilers also. It took a little drilling to make it fit right too. Mine was also kinda wavy and needed some fiberglass and sanding to make it straight.

 

Looking good ! i also use the 5" hawk spoiler on my car . I have cut down the sides so they end in line of the tail lamp ( i have pics if you want to see) .looks good anyway .

pics of my spoiler projects on the site www.thetwins.info.se ( only in swe) you can always look at pics