Got a new roller Tuesday.
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 13
Likes: 0
From: bethalto,il
Car: 1987 Iroc z
Engine: 355 N/a
Transmission: 700r4
Axle/Gears: 3.23 posi
Got a new roller Tuesday.
Hey guys i have been around here reading for a while. And i did have a 91 firebird Bandit . Ended up selling it.
Went tuesday and picked up. A 87 Iroc. the car is awsome got it from an older guy. who did some things to it. Didnt autozone it out.
The car has...
-sub frame connected
-slp brake control kit.
-intrax sport springs all the way around.
-painted darker red.
-SLP headers. and full exaust all the way back
-92 blisters and wing.
-rear drag bags? dont know what they are if any body knows drop some info
-camber adjusted. car has Kuhmo ectas on it.
i had a 355 in garage rebuilt with about 1000 miles on it. with a .492 lift cam. and alum pistons. and a 700r4 with shift kit.
I have pics of everything but cant find my camera cord. So these pics are from my cell i will get the better ones up later. but i have the motor and tranny in car now. hopeing to start it tom
and beat off. haha
Here it is when i got it.

Here is the interior. good shape. But i want to put new seats in it.

Here is my motor sitting in it. Only three days on the car . me and my father have been busting ***.

Here is what the car looks like as of today. I have all belts and pullys on as of now. lifters. rods. and valve lash set. just need a few things to get it running should be on road next week.

The pics are from cell phone. but the car looks way better in person. I will hopefully have more pics of build up tom. and when we get it started a vid.
Thanks guys Let me know What you think of me and my fathers new project.
Went tuesday and picked up. A 87 Iroc. the car is awsome got it from an older guy. who did some things to it. Didnt autozone it out.
The car has...
-sub frame connected
-slp brake control kit.
-intrax sport springs all the way around.
-painted darker red.
-SLP headers. and full exaust all the way back

-92 blisters and wing.
-rear drag bags? dont know what they are if any body knows drop some info

-camber adjusted. car has Kuhmo ectas on it.
i had a 355 in garage rebuilt with about 1000 miles on it. with a .492 lift cam. and alum pistons. and a 700r4 with shift kit.
I have pics of everything but cant find my camera cord. So these pics are from my cell i will get the better ones up later. but i have the motor and tranny in car now. hopeing to start it tom
and beat off. hahaHere it is when i got it.

Here is the interior. good shape. But i want to put new seats in it.

Here is my motor sitting in it. Only three days on the car . me and my father have been busting ***.

Here is what the car looks like as of today. I have all belts and pullys on as of now. lifters. rods. and valve lash set. just need a few things to get it running should be on road next week.

The pics are from cell phone. but the car looks way better in person. I will hopefully have more pics of build up tom. and when we get it started a vid.
Thanks guys Let me know What you think of me and my fathers new project. Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Re: Got a new roller Tuesday.
nice project! hauling butt on that motor swap.
Bully, nice camaro! lol I'm highly debating one myself, time will tell...
Bully, nice camaro! lol I'm highly debating one myself, time will tell...
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 13
Likes: 0
From: bethalto,il
Car: 1987 Iroc z
Engine: 355 N/a
Transmission: 700r4
Axle/Gears: 3.23 posi
Re: Got a new roller Tuesday.
thanks guys. As far as other plans. get it going for now. figure out the rear drag bag set up. see if its worth keeping.
Then i would like to do a rollcage, decent set of racing seats nothing tuner. just classy. Would like to get a 3.42 4th gen rear end. And some zr1 wheels.
Then a t5 or t56 swap.Dreams Dreams Dreams. but i was going to biuld this car to sell. and have since fell in love with it. so its a keeper.
So i will keep ya guys updated. Let me know on any info on the rear suspension set up i will try to post pictures soon. But its a coil spring with a small air bag. is that drag bag? is it adjustable ? can you tell from info i have gave you lol . only thing holding me back is i am only 17 and money.
Then i would like to do a rollcage, decent set of racing seats nothing tuner. just classy. Would like to get a 3.42 4th gen rear end. And some zr1 wheels.
Then a t5 or t56 swap.Dreams Dreams Dreams. but i was going to biuld this car to sell. and have since fell in love with it. so its a keeper.
So i will keep ya guys updated. Let me know on any info on the rear suspension set up i will try to post pictures soon. But its a coil spring with a small air bag. is that drag bag? is it adjustable ? can you tell from info i have gave you lol . only thing holding me back is i am only 17 and money.
Last edited by Turbotyla; Jun 1, 2008 at 01:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM




