ok i've been real lazy over the winter and my billet aluminuim wheels have brake dust embedded in the clear coat.any suggestions on how i should go about cleaning them?

------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt II
http://www.street-dawg-racing.cityslide.com
http://photos.yahoo.com/tonysams72
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation/

 

any one?they are clear coated

[This message has been edited by 91banditt2 (edited April 18, 2001).]

 

I think I would try some polishing compound. Once they are cleaned up get a few good coats of polish on them to help protect from future damage.

------------------
88 IROC convertible
-=ICON Motorsports=-

 

can anyone recamend a good polishing compound?

------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt II
http://www.street-dawg-racing.cityslide.com
http://photos.yahoo.com/tonysams72
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation/

 

I'm facing the same problem but I found this thing you put on the inside of you rim and it' a brake dust guard.. it doesn't keep it all off but it keeps a majority of it off, so I'm hoping for about $25 it'll save me some time..

------------------
92 Rs Heritage Edition Camaro
305
3.27 posi Rear end
Flow masters
not to much else to make it more than stock until I put that 350 in shortly

IM: DarkHal 2000
Feel free to join my Webring listed on my web page (X-treme Fbody). I'm always looking for third gen's to add.
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm