parts needed
Thread Starter
On Probation
Joined: Feb 2005
Posts: 550
Likes: 0
From: Randallstown Maryland
Car: 1986 Trans Am
Engine: 305
Transmission: Auto
parts needed
alright guys, i know a few of you (Kevin, Steve ect. ect.) have a few parts laying around, so here what i need, and i'll have a few hundred to spend by next weekend
i need everything for a 86 T/a infront of the radiator, minus the crumple zone and fog lights.
i also need a hood anything that fits, i'm not picky.
and both front 1/4 panels.
i also need the core suuport,(directly in front of the radiator, its welded in), so if you have one, or know where i can find one lemme know.
alright, if you have any of this cheap or atleast reasonable, either PM me, email me at onemeanlg4@aol.com or call my cell at 410-935-8954 and leave a message.
thanks guys
i need everything for a 86 T/a infront of the radiator, minus the crumple zone and fog lights.
i also need a hood anything that fits, i'm not picky.
and both front 1/4 panels.
i also need the core suuport,(directly in front of the radiator, its welded in), so if you have one, or know where i can find one lemme know.
alright, if you have any of this cheap or atleast reasonable, either PM me, email me at onemeanlg4@aol.com or call my cell at 410-935-8954 and leave a message.
thanks guys
Junior Member
Joined: Jun 2005
Posts: 48
Likes: 0
From: Hamilton, NJ 08619
Car: (used to) 1982 CFI T/A
Engine: 350 CFI
Transmission: TH350
I might have just what you need, but I have to check on something first. Is an 87 TA the same in regards to the parts you want?
NJ, BTW. Too far?
NJ, BTW. Too far?
Thread
Thread Starter
Forum
Replies
Last Post




