Any local welders in Richmond?

Subscribe
Feb 11, 2008 | 09:56 AM
  #1  
I have a buddy of mine that has a small project that wont take but maybe an hour tops. He has a big block with some nice headers. The problem is the headers wont fit and the lower part of the firewall near the chassis needs a trim so the headers can fit. He is offering to give his green trans am (it needs work) but everything is in order as long as the job is done he doesnt care. He and I are tight on money but can offer the trans am as payment or reach another agreement. Let me know so I can talk to him, he is a patient guy and so am I. If I had the tools I would do it but I dont and would prefer having someone that is a professional do the job anyways.

Let me know

Thanks

CCowner4life
Reply 0
Feb 11, 2008 | 10:48 AM
  #2  
Re: Any local welders in Richmond?
I sent you a PM. I am an hour and a half away but might be interested
Reply 0
Feb 11, 2008 | 11:36 AM
  #3  
Re: Any local welders in Richmond?
He has plenty of parts well as a whole trans am he will give ya, it has a mint condition rare dashboard. He also have a 350 engine with a nice stall converter. There are plenty more parts and you can have a look at what he has. Let me know I am sure he will be willing to work something out this evening or tomorrow. depending on your work schedule
Reply 0
Feb 12, 2008 | 07:51 AM
  #4  
Re: Any local welders in Richmond?
I did get the info like we spoke about via email while I was working yesterday, My buddy is getting pics today so you will have them by end of the day today so you can look further into the small modification project. From what I gather he had already installed it once but the headers were a little too big and wouldnt fit right. If you cant get it to work after looking just let me know, I would hate for him not to be able to get hsi 82 camaro back on the road. Talk to you soon

Mike
Reply 0
Feb 21, 2008 | 05:16 PM
  #5  
Re: Any local welders in Richmond?
im a weldor in cincinnati ohio but id travel for an engine and parts...i need them bad... got me a car and no money!
Reply 0
Feb 21, 2008 | 05:24 PM
  #6  
Re: Any local welders in Richmond?
I dont know what he has left and I think he is trading the car that needs the work as well as the green TA for either a 1st gen or 2nd gen camaro depending on what deal he has worked out.
Reply 0
Feb 21, 2008 | 05:25 PM
  #7  
Re: Any local welders in Richmond?
if nothing would he sell the 350?

my limit is about 4-500 dollars :'(
Reply 0
Mar 8, 2008 | 10:40 AM
  #8  
Re: Any local welders in Richmond?
Quote: if nothing would he sell the 350?

my limit is about 4-500 dollars :'(
The engine is a 350 with 454 parts pontiac 350 Big Block but I think he giving it in a trade for another camaro (he is trying to get a manual tranny camaro)
Reply 0
Subscribe