Mid-Atlantic Region Regional board for all of the Mid-Atlantic states. Discuss gatherings and get togethers.

Norfolk guy needs help

Thread Tools
 
Search this Thread
 
Old Aug 19, 2008 | 11:46 PM
  #1  
camarod24's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 52
Likes: 0
From: I live in Norfok, VA
Car: 1986 Camaro Iroc
Engine: 305 TPI
Norfolk guy needs help

OK I have quite a predicament here. If anyone can help I would really appreciate it. I bought a camaro about a year ago and it ran when I bought it and then it went down hill FAST! I am currently trying to remove the engine but I am at an apartment complex and I am not supposed to work on cars here nor in my new place which I am moving to in December. The engine is shot it was knocking smoking leaking missing just a mess so I figure that it will cost more to fix it than to just put a new engine in in. Well ANYWAY does anyone (near Norfolk) have a engine crane or some thing like that that I can use to pull the engine and also can anyone tell me how to do it lol. My plan right now is to just tear it down piece by piece until I get to just about the bare block at which point I should be able to figure out how to unbolt it from the car. Also maybe if anyone has a garage or anyspace that I can rent until the engine is replaced (I know that is asking an aweful lot) that would help out tremendously. Thank you all for looking.
Reply
Old Aug 24, 2008 | 04:14 PM
  #2  
thecaminator's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 76
Likes: 0
From: Roanoke, VA
Car: 1992 Chevrolet Camaro RS
Engine: 350 TBI
Transmission: NWC T5
Axle/Gears: 3.45 9 bolt posi
Re: Norfolk guy needs help

you know, AutoZone rents out Cherry pickers and stuff like that. I swapped my buddies engine for him in a apartment complex a year or two ago. Its not that complicated to do. My best advice is to get the manual on it. Costs about 20 bucks at Autozone. Now I just rebuilt mine in my living room, if your wife doesn't mind it. Saves you money and time if you got friends that will help
Reply
Old Dec 12, 2008 | 08:24 AM
  #3  
mrt89rs's Avatar
Senior Member
 
Joined: May 2002
Posts: 783
Likes: 0
From: Tucson AZ where the 3k ft of elevation kills your time
Car: 89 camaro rs
Engine: 383 .06 over
Transmission: th350
Axle/Gears: 3.73 10 bolt
Re: Norfolk guy needs help

I live accross the street from Greenies in ocean view if you know where that is at. I have done a few engine swaps before but I have been in the Navy for the last 3 1/2 years. Any how let me know how the engine rebuild is going. Im me or give me a call at 709-2419 if you are still working on it. I could stop buy and have a beer or two.

-Mike
Reply
Old Dec 16, 2008 | 12:39 PM
  #4  
danziger's Avatar
Member
 
Joined: Aug 2003
Posts: 482
Likes: 0
From: Chesapeake, VA
Car: 1991 Formula Firebird
Engine: L98 with headers/exhaust
Transmission: 700R4
Axle/Gears: 3.23 10-bolt
Re: Norfolk guy needs help

I have a friend that is a 3rdGen lunatic and he does great work at decent prices. He could probably do the job for 1/2 what you would pay a shop. Let me know and I'll put you in touch...
Reply
Old Dec 16, 2008 | 07:50 PM
  #5  
camarod24's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 52
Likes: 0
From: I live in Norfok, VA
Car: 1986 Camaro Iroc
Engine: 305 TPI
Re: Norfolk guy needs help

ok well an update for you guys I have a house now and have the engine out (which is for sale now btw) and now I have to pull the other engine. But this one is going into my camaro so I have to be a lot more careful.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cleotiz
Electronics
7
Jan 6, 2018 08:56 PM
aaron7
Interior
18
Aug 17, 2016 06:02 PM
PestilenceIV
North East Region
3
Aug 20, 2015 03:32 PM
Street Lethal
Interior
7
Aug 14, 2015 08:25 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM




All times are GMT -5. The time now is 02:29 AM.