Just wondering if anyone would be interested in a motor that I have. I was going to put it in my camaro, but with school and work and everything else, I just dont have time.

I bought this from a friend a little over a year ago. Its never been fired. I picked it up from the machine shop (Pakes in Janesville) and its been in storage on my engine stand up until about 3 months ago, I set it in my car but its not hooked up.

Here is what I know about the motor:

350 2 bolt
bored .060
Keith Black signature pistons
Speed pro Chrome Moly rings
Stock crank and rods
Clevit 77 bearings
All ARP bolts and studs
Melling high volume oil pump
Comp Cams Magnum Rockers 1.52 Ratio 3-8" stud
Comp double roller timing set
fluidamper harmonic balancer
9.2/1 compression
Heads were done by star auto here in Janesville
882 heads w/.202 valves
Supposed to have about 375 hp from what I have been told.

I have an edelbrock 600 carb w/ electric choke that is brand new in the box also.

If anyone is interested in this, please email me.

$2500 obo

p.s. here are some pics..

http://members.aol.com/metallica4725/myMotor