Well i havent been posting around too much but ive been working alot.

I got a Web-Coupon from a registration so i saved it and i wanted to spread the wealth.

I asked for permission by an admin.

the coupon is valid and will be valid at any sears. Just print it up and cut it out...

http://pic6.picturetrail.com/VOL161/...5/35561522.jpg


have fun guys

 

the barcode isnt good for just you is it? do you have a card or anything? dont wanna get in trouble for fraud, lol

 

Get a craftsmen club card. You can get the phone # at any sears, and call in to get your card. You get special discounts every month or so. I haven't used it yet and I've had it for about 4 months.

 

I work in tools at sears and that coupon will work numerous times. You can buy one thing and use that coupon, and if the cashier forgets to collect it and destroy it, you can use it again on another transaction Or just wait til he walks away and pull it out of the trash can under the register

Did a sears employee just say that, i think not...

 

ummm... or you could just print out another one off the computer and not get caught by security?

 

Security won't bother you if you are in the trash. Plus, save paper.

 

good point, fraud and corrupting our already fragile economy is ok...but we'd be in deep **** if we pissed off some left wing tree ****ers...

 

its not fraud... its shopping around for the best deal.... thats part of our economy.


i have a stack of papers on my desk.

they all have the word MEMO printed on them.
they will all be in the trash by the end of the week.


Tuck the Frees.

 

So, would printing out numerous coupons get me in trouble?

 

i was bein sarcastic....but it's all good...

nah, consensus is that we can rip sears off...i mean save and be good shoppers continually....

 

*shrug* i dont see how.... as long as its legit.


there are scams and fake coupons online.. however, i donno if this one is fake or not... im just assuming its not for the time being.

 

if you guys want.. i can post a new one of these coupons each month. . . .


and also let you know that most of the sears hardwares are gettign rid of half their store so its 50-75% off most things (faucets, sheet metal, diamond plate etc)

 

ham u notice the 3 month gap there? everytime I go to sears I spend money, too much money. So I just stop birng my wallet,

 

Haha, this is funny. The sad thing is, is that that 10% off coupon is all we Sears employees get

I work in shipping/recieving, but interviewed for loss prevention last week and I find out if i got the job this week.

You should see all the stuff we crush for no reason. Brand new drill motors, rechargable screw drivers...etc...all kinds of stuff, new in the box, and we just throw it away!!!

 

Man, If I had that job I would take what I could use. Anything else useful that you throw away?

 

Yes we are constanly throwing away drills and misc stuff we find that isnt in the computer anymore. If I buy during craftsman club, I will get 10% associates + 10% craftsman club + 10% student discount

 

lets see.. i got 10% Assoc. 10% Craftsman Club 10% Sears Card Coupon 10% Craftsman Club Coupon 10$ off 50$ purchase (craftsman Calender) and then of course any other coupons i can find

 

ok since craftsman has a discount someone hook me up with discounts from snap on

 

how do i go about getting that student discount? just show them a school id?

 

Yes. They should be able to give it to you buy that...but only if you are part of the auto tech program.

Ede, I get 50% through Snap-On right now. That's how I got this box

 

damn i'd love 50% off snap on stuff. right now i work out of 7 snap on boxes at home plus a craftsman top bottom and another snap on box i take to the track with me. it's always been cheaper for me to buy another box and add on to what i have than trade in mine and buy a bigger box for everything. i'd love a triple bank with locker and riser, not sure i can get all my stuff in it, but it'd be a good start. i can buy cheaper from industrial saleman at work but he's not set up to take cash, or anything really other than POs from companey so i buy off the truck.

 

Snapon Hookup > craftsman Hookup

 

i get 50% of from Snap-on right now, but i still cant afford there prices although the quality of there tools is amazing, i wish i could buy my tools from them, but right now the budget isnt there of 5k+ tool purchase.

the 50% of craftsman i can get is nice, since when ever i break one i can replace it very quickly and for free at the sears down the road. and the purchase price is extremly cheaper then snap-on.

what kind of warrenty does mac offer? i can get a discount on mac tools, but i personnaly have never seen and mac tools at the shop or anyother place. are they good qualitly?

 

Mac makes decent tools, comparable to snap-on but prolly not quite as good.

 

never had a mac dealer anywhere i've been. from what i've seen of their stuff it seems a little less finished, not as well thought out as snap on stuff. i know proto makes a lot of stuff for mac. put a proto and mac ratchet side by side and other than the handle end you can't tell them apart.

 

dammit.... stupid coupon is expired

 

how about mac compared to craftsman?

 

how do you get 50% off snapon and craftsman?

 

Of course you know this means that we need a new topic for best tools, prices, and such, right?

 

Usually if you are a student you get hella good discounts on tools. I got 50% through snap-on....my boss at sears couldnt do that so I went with snap-on cuz it was about the same price as what I would have paid for the craftsman.

I can go through a craftsman dealer and get the prices pretty damn low. Most sears stores will match a dealers price cuz they want the business (and comission in my case ).

 

50% would be great. most of my buys any more are either new stuff that comes out or a few random impulse buys. lot of the new stuff is a redesign on the old and i get sucked up in it all and have to have the new. i got the new soft dead blow hammers to up grade from the old style i had. would love to get some of the new soft grip ratchets and screwdrivers.

 

I like craftsmam for tools used daily, because if I snap or break them I can run up to sears anytime, and not have to wait for the snap on guy to come around.

 

in 30 years of spinning wrenches i an count on one hand the snap on tools i've broke. craftsman is a differant story.

 

on one hand, i have to agree with that.. ive broken 2 ratchets...


but i do like the "as cast" feel of craftsman ratchets.... and i was using them as a breaker bar, with a cheater bar on em when they broke... ive broken snap on ratchets the same way.... (ya'd think id learn to stop doin it by now... lol )

but i got a new replacement without hassle.... so i dont hold it agienst them... under any sane abuse, i doubt id ever break them..



what it comes down to for me is the age old mechanics delemmia..


on one hand, the snap on guy comes to you.... you call, he comes...
on the other, you know where sears is, and can go anytime....


to me, thats where the choice is made... they're both good tools, i just usually go with crafstman because sears is alot closer.

 

Sorry i forgot about the post....


Ill post regular Updates to this thread with the Required Coupon

 

so if i print off 2000 of those and take them to sears, will they give me a dollar?

 

LOL that might be able to buy the paper & ink

 

Would I get that discount for being a high school student?

 

I think it's only for automotive programs at colleges...

 

i dont know, I work at sears accross the road from a big tech college. And they wont give me an extra discount for attending there....

 

Ede, I get 50% through Snap-On right now. That's how I got this box

I am also going to a Tech school and I got 55% off on all my Snap On tools, I didn't have to pay a dime. I'm attending school on a Federal program due to the company that I worked for layed me off and outsourced most of the work overseas. I got a roller and top box filled with tools (almost $10,000 worth) like Josh's except it has single bays. I can get Craftsman tools @45% off, or Mac tools @ 50% off. It's a great deal for someone just getting started in the automotive field..

 

Coupon for March

 

 

I get about a 53% discount from matco online because I'm a tech student. The quality is up there with snap-on and mac, but w/the discount its a very good price usually