new guy fr: wi
Thread Starter
Junior Member
iTrader: (2)
Joined: Aug 2009
Posts: 16
Likes: 0
From: Janesville -wi
Car: 1986 Iroc
Engine: CPmotorworks sbc on E
Transmission: Home Built T350
Axle/Gears: 3:73
new guy fr: wi
I can't post in the classifieds so I thought if I made one post here I’ll be able to . I’m glad I found this place,
so I have an 86 iroc that I have pushed around for about 5 years then have had the worst luck " crappy motor builder" with motors etc.it had more miles on the trailer than under it’s own power, until about 3 years ago when I finally just built one myself, now I can see what drives people to build these things, I’m loving every bolt I turn on it and I don't see me stopping until I pull the wheels of the ground, " maybe another 5 years"
406 with a little of this and that on spray, this winter I plan on bumping the comp, "more than I have already" and running pump race gas , E-85 .
so well see how that works for me..
so I have an 86 iroc that I have pushed around for about 5 years then have had the worst luck " crappy motor builder" with motors etc.it had more miles on the trailer than under it’s own power, until about 3 years ago when I finally just built one myself, now I can see what drives people to build these things, I’m loving every bolt I turn on it and I don't see me stopping until I pull the wheels of the ground, " maybe another 5 years"
406 with a little of this and that on spray, this winter I plan on bumping the comp, "more than I have already" and running pump race gas , E-85 .
so well see how that works for me..
Thread Starter
Junior Member
iTrader: (2)
Joined: Aug 2009
Posts: 16
Likes: 0
From: Janesville -wi
Car: 1986 Iroc
Engine: CPmotorworks sbc on E
Transmission: Home Built T350
Axle/Gears: 3:73
Re: new guy fr: wi
Welcome to ThirdGen.org
Please make sure you read all stickies and announcements as they contain important and frequently asked information:
https://www.thirdgen.org/forums/anno...php?f=118&a=95
You must have an account that is older than 15 days before you can use our Classifieds section (For Sale section), which was requested by our members to help reduce possible scams.
Thanks.
Re: new guy fr: wi
This post will answer all your questions about not being able to post in the classifieds.
https://www.thirdgen.org/forums/prob...able-post.html
whoops JT beat me to it.
https://www.thirdgen.org/forums/prob...able-post.html
whoops JT beat me to it.
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM






