Welp this is my first post
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Welp this is my first post
Hey all,
Just stoping in to say hi, going to stay around on these boards for a while
Firebreed
Just stoping in to say hi, going to stay around on these boards for a while
Firebreed
Supreme Member
Joined: May 2002
Posts: 1,764
Likes: 0
From: cali
Car: 84z, 65 elcamino
Engine: l69 and a hyped up sbc in the camino
Transmission: t5 m21
Axle/Gears: 373s 411s
nice to have you on the boards. do you know the quans? they have some of the baddest cars in your part of the valley
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by jocww
nice to have you on the boards. do you know the quans? they have some of the baddest cars in your part of the valley
nice to have you on the boards. do you know the quans? they have some of the baddest cars in your part of the valley
But i got pics of my car, ill post them up soon, MY paint is pealing like heck and im going to get it repained as soon as i can. Trending Topics
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Hafords about a 30 min drive south of Fresno, you can take 43, and as soon as you hit 10th, or fargo st, your in hanford (which is faster)
or you can take 41, then go east, hit 198, then go east past lemoore (7 or so miles from lemoore) and you hit the city of Hanford.
or you can take 41, then go east, hit 198, then go east past lemoore (7 or so miles from lemoore) and you hit the city of Hanford. Last edited by Firebreed; May 30, 2005 at 08:27 PM.
Supreme Member
iTrader: (2)
Joined: Sep 2003
Posts: 10,494
Likes: 3
From: Woodland, CA
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
damn thats far, most of us westcoast board users are the nor cal folk.
theirs a specific so cal board that prolly better suites you, but i dun wanna scare you off. i see you got an SSA edition, rare.
theirs a specific so cal board that prolly better suites you, but i dun wanna scare you off. i see you got an SSA edition, rare.
Supreme Member
iTrader: (2)
Joined: Sep 2003
Posts: 10,494
Likes: 3
From: Woodland, CA
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
SSA was a region specific package, its rare that thier werent many ssa, with special badges, thats about it though.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Heres a pic of my car. can't remeber when i took them though. (this was a few months ago, my paint has gone even more to hell)
Last edited by Firebreed; May 21, 2005 at 03:00 PM.
Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Welcome to the boards. Don't worry about the paint, every thirdgen has paint issues. Nice car, looks like a very straight and well taken care of body, which is hard to find in these cars. Congrats again.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Thanks, I took care of the Frount quarter pannel (passenger side) seems some dimwit didnt put the car on the right lift point on that side.. and bent the part of the body where that small braket right behind the wheel is so i took a pair of plires and got that part preaty much straight, i got a few rusty areas, but ill get that cleaned up as soon as i get the cash for a good paint job.
Firebreed
Firebreed
Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
A little surface rust won't be to hard to take care of at all. I have some around my t-tops that I will be fixing this summer. I know what you mean about saving money for a good paint job. I hate having to paint a car, too expensive, but it protects and makes your car look so good, and that's very important, at least to me.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
It is important to me too
, as soon as i get around 6000 dolllars (a bit expisive?) The car's going black with Gold racing stripes and maybe a bit of ghost flames with it (not to sure how it is gonna look with the ghost flames), and im gonna get my rim's repaited, (same color, just needs to get repainted, their dirty as hell, and ive scrubed, and powerwashed them, and they are still dirty.)
, as soon as i get around 6000 dolllars (a bit expisive?) The car's going black with Gold racing stripes and maybe a bit of ghost flames with it (not to sure how it is gonna look with the ghost flames), and im gonna get my rim's repaited, (same color, just needs to get repainted, their dirty as hell, and ive scrubed, and powerwashed them, and they are still dirty.) Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
$6000 is about right for a real good paint job. I like the color scheme you will be going with, and flames should look sweet with it. When your rims are that old don't bother trying to clean them, just repaint them and they will look like new. Good luck with everything, and keep us updated on how things come along.
Supreme Member
iTrader: (2)
Joined: Jan 2005
Posts: 3,058
Likes: 0
From: 707
Car: '92 Z03
Engine: LSX
Transmission: M12
Damn, $6K?
IMHO, I would spend $500 and Earl Scheib it, take the remaining $5500 and have one killer street sleeper, and some extra bread to take my girl out with, maybe buy some food...
Just my
IMHO, I would spend $500 and Earl Scheib it, take the remaining $5500 and have one killer street sleeper, and some extra bread to take my girl out with, maybe buy some food...
Just my
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by vindeezl
Damn, $6K?
IMHO, I would spend $500 and Earl Scheib it, take the remaining $5500 and have one killer street sleeper, and some extra bread to take my girl out with, maybe buy some food...
Just my
Damn, $6K?
IMHO, I would spend $500 and Earl Scheib it, take the remaining $5500 and have one killer street sleeper, and some extra bread to take my girl out with, maybe buy some food...
Just my
Thats a $500 paint job on it right now
I don't think your paintjob should be worth more than your car.
$6000 is about right for a real good paint job. I like the color scheme you will be going with, and flames should look sweet with it. When your rims are that old don't bother trying to clean them, just repaint them and they will look like new. Good luck with everything, and keep us updated on how things come along.
) And it seems no one is hireing right now
Firebreed
Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Sorry about the job issues, hope it works out soon for you. Thanks for keeping us updated.
There is a big difference between a $500 and $6k paint job, you can see and feel the difference. Cheap paint job is going to have a bunch of over spray and will be very thin and just won't hold up in time. Spend $6k and your car will be taken apart first, and the paint will be orange peel thick and will last 10+ years if taken care of right, it would be a factory paint job basically. Please don't think I am dissing on people who get $500 paint jobs. That's what I will be getting soon just to get me by until I can save up $6k or more, plus not everyone is like me. Oh, and to me my car is priceless.
There is my
There is a big difference between a $500 and $6k paint job, you can see and feel the difference. Cheap paint job is going to have a bunch of over spray and will be very thin and just won't hold up in time. Spend $6k and your car will be taken apart first, and the paint will be orange peel thick and will last 10+ years if taken care of right, it would be a factory paint job basically. Please don't think I am dissing on people who get $500 paint jobs. That's what I will be getting soon just to get me by until I can save up $6k or more, plus not everyone is like me. Oh, and to me my car is priceless.
There is my
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by wills83z28cfi
Oh, and to me my car is priceless.
There is my
Oh, and to me my car is priceless.
There is my
anyways, right now im trying to trace down some engine problems, my choke seems to be going out (car stalls when cold, but runs fine when warm/norm operation temp), my Cruise Control just stoped working on me
and my a/c is out!
Last edited by Firebreed; May 17, 2005 at 11:50 PM.
Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Sounds like a typical thirdgen. Once something goes wrong on these cars everything wants to break at the same time, I know how you feel. It will get better in time though, and with more money of course.
Supreme Member
iTrader: (2)
Joined: Jan 2005
Posts: 3,058
Likes: 0
From: 707
Car: '92 Z03
Engine: LSX
Transmission: M12
Originally posted by wills83z28cfi
Once something goes wrong on these cars everything wants to break at the same time
Once something goes wrong on these cars everything wants to break at the same time

It's like a freshly rebuilt Holley carb, you gotta keep f^&$%ng with it, but once it's right, it's sah-weet!
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Well, i found a little car club out in hanford, im the only third gen camaro owner out there (many nice old cars includeing corvettes, mustangs, hot rods, ect) though, Im gonna go to a meeting to night, at Target (show off my car and hang out with the rest of the members) If any of you want to check out my car in person come on out! it starts at 6:00pm today and goes to 9 and it's every friday at the same time.
Firebreed
Firebreed
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Heres some more pics of my car






If you get any big boxes with an red x in them just right click and click on show picture..
If you get any big boxes with an red x in them just right click and click on show picture..
Last edited by Firebreed; May 21, 2005 at 09:20 PM.
Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
Get those pics working for us.
Have fun at the meeting and let us know how it goes. I may try to make it out there sometime this summer for a meet.
Have fun at the meeting and let us know how it goes. I may try to make it out there sometime this summer for a meet.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Just got back from my little get together, and it went great! wish i wasnt the only thirdgen out there though
I'll look foward to see you out there this summer! Ill get those pics up and working as soon as i can!
I'll look foward to see you out there this summer! Ill get those pics up and working as soon as i can! Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by vindeezl
Oooooh look at all the pretty red x's
Your pics need "welp"
Oooooh look at all the pretty red x's
Your pics need "welp"
"welp"= Well/Help
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Well it started off as a typeo, then i came up with its deffinion, so... there we go
And i wish my 2.8 would do this
laters
Firebreed
And i wish my 2.8 would do this
laters
Firebreed
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
So am i
next time soem one wants to race me ill make sure theres a cop around and just let the other guy go
next time soem one wants to race me ill make sure theres a cop around and just let the other guy go Banned
Joined: Jun 2003
Posts: 1,377
Likes: 0
From: Orangevale, CA
Car: 07 Silverado
Engine: 5.3L V8, flexfuel E85
Transmission: 4spd. Auto
Axle/Gears: 3.73 locking diff.
I only see one of the other pics working, nice interior though, hope to see the other pics soon.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Got it!
had to change the extention from .jpg to .JPG lol darn computers!
had to change the extention from .jpg to .JPG lol darn computers! Last edited by Firebreed; May 21, 2005 at 09:21 PM.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Well since i got the other pics to work heres a few more to look at
and these pics were from when i was working on the car to figure out whey my driver side door's power window wasnt working, and a few general maintiance to the engine, Sadly, i need a new power window moter, so im gonna be replaceing both driver side, and passanger side.


and these pics were from when i was working on the car to figure out whey my driver side door's power window wasnt working, and a few general maintiance to the engine, Sadly, i need a new power window moter, so im gonna be replaceing both driver side, and passanger side.Last edited by Firebreed; May 21, 2005 at 09:29 PM.
Supreme Member
iTrader: (2)
Joined: Jan 2005
Posts: 3,058
Likes: 0
From: 707
Car: '92 Z03
Engine: LSX
Transmission: M12
Originally posted by Firebreed
Sadly, i need a new power window moter, so im gonna be replaceing both driver side, and passanger side.
Sadly, i need a new power window moter, so im gonna be replaceing both driver side, and passanger side.
Glad you "Welped" out your pics. You got that wacky 85 MPH 1/2 Canadian Speedo lol, that must be distracting.
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Accually when i first got the car i was driving a little 4 banger car, with the speedo on the right side, so i keeped looking at the Tach in this car for a long time
the only thing that pisses me off is that i cant tell you how fast i have really gone :P
the only thing that pisses me off is that i cant tell you how fast i have really gone :P Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Originally posted by TraviZ
youve done over 85!?
youve done over 85!?
Amazing aint it
I was quite surpised my self, if my Speedo isnt lieing to me that is 




