whos ready for dyno day?

Subscribe
Jul 8, 2005 | 11:30 PM
  #1  
i just got my mallory ignition installed today, after i clean up the wires some, i think my car will be ready for the dyno, i already got new plugs, i may get new wires and of coarse, ill do an oil change ill wait till the day before though so i get the most out of my royal purple

oh ya, i made a new sig again. whatcha think?
Reply 0
Jul 9, 2005 | 12:51 AM
  #2  
I'll finish up a tune-up next week, and get my tires on. Then I'll clean the hell out of my car on friday

I was hoping to have headers by now, but alas, the money gods had other plans There's still a possibility though..
Reply 0
Jul 9, 2005 | 01:06 AM
  #3  
Not me
Reply 0
Jul 9, 2005 | 02:43 AM
  #4  
urban whats the progress on my motor is it still torn down???
and wheres my mp3 discs u stole out of my car?
Reply 0
Jul 9, 2005 | 07:59 AM
  #5  
Quote:
Originally posted by 3.492rs
urban whats the progress on my motor is it still torn down???
and wheres my mp3 discs u stole out of my car?
ask steve, and i dunno.
Reply 0
Jul 9, 2005 | 11:45 AM
  #6  
Cool sig Travis, says it all in a nice format.

I'm ready to go, no changes, running her as she is.
Bought some slotted rotors online, probably won't get them in time.
Changing the oil this weekend - full synthetic Q + K&N high perf. filter as always.
Maybe I'll spend some time shining up my engine bay.
Reply 0
Jul 9, 2005 | 04:02 PM
  #7  
I'm ready. Been without my car since June 30th. It will still be in the shop until next week.

~cry~
Reply 0
Jul 9, 2005 | 09:42 PM
  #8  
damn transmission hasnt been shipped yet those ****ers

what does it take to box up a new transmission and send it sheesh
Reply 0
Jul 9, 2005 | 09:47 PM
  #9  
the Vette's ready was gonna try and have the 60K done but its not gonna happen so I'll just clean the K&N, maybe I'll get some race gas for it
Reply 0
Jul 10, 2005 | 05:44 AM
  #10  
Quote:
Originally posted by urbanhunter44
i dunno.
WTF wheres my cds!!!
Reply 0
Jul 10, 2005 | 12:00 PM
  #11  
Quote:
Originally posted by kairles
the Vette's ready was gonna try and have the 60K done but its not gonna happen so I'll just clean the K&N, maybe I'll get some race gas for it
Where do you get race gas?
Reply 0
Jul 10, 2005 | 06:19 PM
  #12  
sacramento raceway, I think they sell it there. There's probably a few sunoco stations around as well, i dunno where though.
Reply 0
Jul 10, 2005 | 08:34 PM
  #13  
midnight peformance too
Reply 0
Jul 10, 2005 | 10:59 PM
  #14  
tognattis has all kinds of gas about $40 for 5 gallons
Reply 0
Jul 10, 2005 | 11:34 PM
  #15  
im not goin

gonna be managing the shop for about 2 weeks, bennie left the country. haha

oh well car probably wasnt gonna be ready anyways
Reply 0
Jul 10, 2005 | 11:42 PM
  #16  
Quote:
Originally posted by porkyzilla
im not goin

gonna be managing the shop for about 2 weeks, bennie left the country. haha

oh well car probably wasnt gonna be ready anyways
LAME! !!

whos ready for dyno day?-tyson.jpg  

Reply 0
Jul 10, 2005 | 11:45 PM
  #17  
Quote:
gonna be managing the shop for about 2 weeks
Who's going to work on the cars? lol.
Bummer man.

So who is going from Sac?
Travis, Terrell and I ??
Reply 0
Jul 11, 2005 | 12:34 AM
  #18  
Quote:
Originally posted by porkyzilla
gonna be managing the shop for about 2 weeks
everyone pray for bennie's shop, and upon his return it will be in one piece
Reply 0
Jul 11, 2005 | 01:40 AM
  #19  
Quote:
Originally posted by kairles
everyone pray for bennie's shop, and upon his return it will be in one piece



that sucks eric, I was hoping I'd get to meet you! Good luck with the shop though.
Reply 0
Jul 11, 2005 | 10:14 AM
  #20  
Quote:
Originally posted by kairles
everyone pray for bennie's shop, and upon his return it will be in one piece
i think it will be the opposite better than ever the new and improved shop

Reply 0
Jul 11, 2005 | 10:32 AM
  #21  
hehe, im on the wrong coast for the forum, but i just saw the thread and wanted to reply....

we just had a dyno day to raise money for one of the local gear heads who just found out he had cancer...

turned out to be a rainy, hot, humid day, but it was still a fun time..

whos ready for dyno day?-ls1baselinedynosheet.jpg  

Reply 0
Jul 11, 2005 | 12:51 PM
  #22  
Question for Tony:

What forms of payment are accepted at the Dyno?
Reply 0
Jul 11, 2005 | 02:53 PM
  #23  
Quote:
Originally posted by Cadillac
Question for Tony:

What forms of payment are accepted at the Dyno?
Cash, grass or ***!

I'm sure cash or credit, and most likely checks. I'll give them a call in a little bit, they are at lunch right now.
Reply 0
Jul 11, 2005 | 07:21 PM
  #24  
Is Dyno Day this Weekend? Where is it going to be again? I need to do some stuff before i go.
Reply 0
Jul 11, 2005 | 08:36 PM
  #25  
Quote:
Originally posted by Ramair21
Is Dyno Day this Weekend? Where is it going to be again? I need to do some stuff before i go.
Yep, saturday. Check the post at the top of the forum (the official dyno day thread) for all the info!

Oh, and there was a giant puddle of coolant under my car today, and the temp took a trip to REAL TOASTY.

An hour and a $55 dollar tow later... Turned out to only be a busted oil cooler line.. I hope.
Reply 0
Jul 11, 2005 | 08:36 PM
  #26  
Quote:
Originally posted by Ramair21
Is Dyno Day this Weekend? Where is it going to be again? I need to do some stuff before i go.
This coming Saturday.

What do you need to do?
Reply 0
Jul 11, 2005 | 11:47 PM
  #27  
I got to fix my transmission.. After shift kit its been acting stupid... Its not going to 3rd gear right only when the car gets hot this happens. I called DANA and he said that i overfilled it which i did and too much air gets in there not allowing it too shift right. im going to drain some fluid too see what happens. Any suggestions? I tried to adjust my TV cable and it didnt make a difference really. If anyone is out there PLZ drop me a note.
Reply 0
Jul 12, 2005 | 02:43 PM
  #28  
do whats obvious first, drain the fluid.

hey del, i think ive convinced will into coming as well, just to hang out though. so that will be 4 of us.
Reply 0
Jul 12, 2005 | 02:59 PM
  #29  
hey eric, let us borrow your lappy and cable, or just the cable and ill get another lappy. for datalogging ya know
Reply 0
Jul 12, 2005 | 07:55 PM
  #30  
Quote:
hey del, i think ive convinced will into coming as well, just to hang out though. so that will be 4 of us.
sweet!
should be a good time to just hang out and watch cars and learn some good info from a variety of folks.
not everyone who's comin is dyno'n, so that's great.
i think kyle with the red LT1 might go as well.
my buddy with a '95 gt might come or ride along, not sure.

had my O2 checked at the shop as i had a hunch it was bad and sho 'nuf it was.
no point to get a/f and data readings if your #'s are inaccurate! whew!
just need to figure out what data i'll be logging now and what to do with it, heh.
can they check for knock?
what degree timing are you running Travis?
i'd like to at least adjust that and possibly my maf inbetween runs.
Reply 0
Jul 12, 2005 | 11:02 PM
  #31  
ive been playing with timing alot lately and running aruond seeing which seems best. i kinda like it about -2 to 0 degrees though which is +4 - +6 degrees advanced over stock.
Reply 0
Jul 12, 2005 | 11:39 PM
  #32  
Have you run it at 10º advanced before?
I can't remember what mine is set at and I don't have a light.
Reply 0
Jul 12, 2005 | 11:41 PM
  #33  
ive run it 6+ advanced a few days ago, car lost alot of power though
Reply 0
Jul 13, 2005 | 12:56 AM
  #34  
Questionable
I may not be able to go now. Here I am after ragging on Eric about not going and my car is STILL in the shop. Parts are hard to find as it turns out.



All hope is not lost however. If I do go, will there be someone there with a timing gun?
Reply 0
Jul 13, 2005 | 01:02 AM
  #35  
If you go mike then ill bring my gun. Man that sucks about your car. what are you getting done to it?
Reply 0
Jul 13, 2005 | 11:26 AM
  #36  
Quote:
Originally posted by Ramair21
If you go mike then ill bring my gun. Man that sucks about your car. what are you getting done to it?
[list=1][*]Spindle[*]Ball joint[*]control arm[*]tie rod[*]alignment[*]wheels/tires[/list=1] Guess who hit a frickin' curb?
Reply 0
Jul 13, 2005 | 12:05 PM
  #37  
hey guys whats up long time no talk. iam hoping there is some slots open for the dyno because i have a few more things done to my car like long tubes and no cats now and hopefully i can cruise up there with you guys and maybe get a dyno run in. i dynoed 290 at the weels with short tubes and cats so hopefully i will be well over 300 but it is running super rich let me know the time you guys are leaving and hopefully i can roll with you guys
Reply 0
Jul 13, 2005 | 12:12 PM
  #38  
Im sure you'll be able to dyno your car some are going just for the GTG

we(sac crew) all plan to meet at my house at 9am and head out

https://www.thirdgen.org/techbb2/sho...hreadid=309274
Reply 0
Jul 13, 2005 | 10:10 PM
  #39  
Parts arrived... all but the bearing and they get here tomorrow.

It's looking up.
Reply 0
Jul 13, 2005 | 11:23 PM
  #40  
sweet man, im eager to meet ya and see how my k&n is doing lol. and kyle, definitely go, in the sac-concord thread, theirs directions to terrels house! check back often!

and i just bought a new timing light and of coarse im bringing it!
Reply 0
Jul 14, 2005 | 12:07 AM
  #41  
yeah baby, things are shapin' up.
git 'r done bitches!
are we staying in concord for awhile after?
anybody with video/cam equip. please bring, along with walkie/talkies.

Reply 0
Jul 14, 2005 | 12:12 AM
  #42  
and a radar detector!
Reply 0
Jul 14, 2005 | 12:15 AM
  #43  
so whos everyones guess on having the highest numbers?
Reply 0
Jul 14, 2005 | 12:29 AM
  #44  
i will say jeremy if he shows up with his blown bird
Reply 0
Jul 14, 2005 | 03:12 PM
  #45  
Dammit, my car is actually all driveable and ****, but I have to work that day! Nooooo!!
Reply 0
Jul 14, 2005 | 04:41 PM
  #46  
cool looks like its going to be a fun time up there havent seen you guys for a wile and i dont really do much with the norcal people so should be fun
Reply 0
Jul 14, 2005 | 07:03 PM
  #47  
I wont forget my camcorder this time I sware I will

oh and walkie talkie's also
Reply 0
Jul 14, 2005 | 11:22 PM
  #48  
i wont let you forget

r1maniac, yu meeting us at terrels house?
Reply 0
Jul 14, 2005 | 11:30 PM
  #49  
Im getting some race gas tomarrow and the buns and stuff I said I'd bring
Reply 0
Jul 14, 2005 | 11:59 PM
  #50  
Quote:
Originally posted by kairles
Im getting some race gas tomarrow and the buns and stuff I said I'd bring
wanna pick up some gas for me
Reply 0