87tpi

iTrader: (5)

Here is that video, the rest will be posted when I wake up. Bad quality but I didn't want to bring my video camera so I used my digital camera.

http://s90.photobucket.com/albums/k2...t=MVI_0001.flv

Wills91RS

Not a bad video Steve

Sorry I didn't say hi man. Rolled out kinda early, I was Travis ride, he was hella tired and sun burnt, lol, we were in the pool for like 2 hours earlier that day. He is just a little white boy and turned hella red, lol. I was red too but it's already turning tan for me

Will run the balt next time on a Wed. I am just not down with paying $35 to race when it's that damn crowded I want to get a good time with the stock setup, then stage 2 it and see how much better it gets.

Del, congrats on the best time so far, I can see 12.9 for you

Big Vin, good times seeing you and the black beast. Only got to see you run once but it's all good.

James I hear did a nice time for a stock car, would have been better if he didn't burn out through 2nd, lol, but it's ok, I was hella bad my first time out to the track in the GTO

JesasaurusRex

iTrader: (3)

i saw an 11.90 outa some TPI m*llet (think the guy posts here), drove by ur car while you had a pack of ice sittin ontop of that manifold but didn't bother taking a closer look because, well, you're still rockin the TPI . Surprised me to say the least, guessin a lil nitrous but anyways, now i'm just ramblin.

As for the gayest 3rd then there, it would have to be that black big tire 11 second one

...now back to my hole

Wills91RS

Lol, never got to see that black iroc run. Guess I know his times now, was curious, 11's, not impressed at all for all that show he had on his car. Figured he would be much faster, all show and no go imho

vindeezl

iTrader: (2)

There I am in the near lane Spun through first and second there

Always good to see you bro, I want to see the Coby run!

We need to schedule another BBQ and that Wed. for sure

That was probably Armando bro (valencia1z), blue car?

That black drag car was gaaaaaaaaaaaaaaay alright, what is with the super narrow rear end that could fit under a Geo Metro? Interior was all hacked and gauges mounted with woodscrews and aluminum stock from Ace Hardware.

Funny thing is right when I walked up to check it out in the pits, one of their crowd (prob the owner) yelled "IT'S FOR SALE!!!".

I replied "No thanks, I'll keep my Black IROC that isn't f****d up" (even if it is slower)

webeeZ28

iTrader: (2)

Nice video . Looks like vinny took out a big ole can of whopa$$ on me.

vindeezl

iTrader: (2)

I 'treed some SRT4 too, that was awesome. My three wins of the day, would have had 4 if I didn't miss 3rd on one run

JesasaurusRex

iTrader: (3)

i didn't take a close look at it, i just despise big tire cars that don't run 7s or faster.

vindeezl

iTrader: (2)

Yeah really, those tires should be on a dragster frame going much faster.

TraviZ

iTrader: (2)

like eric, he probably got a 'good deal' on it.

87tpi

iTrader: (5)

What were your times Vin?

OUTATIME GTA

iTrader: (2)

< waits for more pics and vids >

vindeezl

iTrader: (2)

$hitty, best was a 14.0 @ 99 spinning through first gear

87tpi

iTrader: (5)

Here's one to hold you over Del

http://s90.photobucket.com/albums/k2...t=MVI_0006.flv

OUTATIME GTA

iTrader: (2)

Yeah baby! TPI holdin' it down against the LS1.

Bullydawg

iTrader: (7)

Wish I could go really bad. I have Court on thurday for my Speed Contest Ticket, so when I get my license back you will sure as hell see me out there instead of the streets.

JesasaurusRex

iTrader: (3)

didn't miss much, just the greatest grudge night in a long time

Bullydawg

iTrader: (7)

Haha. Hopefully I only get my license suspended for a month. If it is more, it is going to suck looking at the bird just sitting there. I might get bored and add some nitrous I already got bored and added some kicker Comp subs W/ a 1600 watt amp...

1TUF92Z

If you took my offer(running front runners) you would have tasted 12.80's. yummy

I need to go to the track more. Not this every 18 months 14 second, no 2nd gear bullshit runs. I'm tired of it.

OUTATIME GTA

iTrader: (2)

This is true, but I'm still in the mindset of running my car as I would on the street.

It might be fun to run slicks, or skinnies just to get that ideal 60', but with those 107 traps I should be able to pull 12.80s as it stands.

I agree with needing to go more. Couple times a year isn't enough practice for me.

87tpi

iTrader: (5)

Del, aren't you still running a 2,400 stall? Myabe you should step it up a little.

OUTATIME GTA

iTrader: (2)

Yeah, I have the SLP 2400 stall, but while it can hold the car in place to around 2K, if I launch that high I can't get enough traction.
I tend to launch closer to 1500, but need some more lap time to practice launching it higher/harder to get better 60's I guess.

kairles

iTrader: (2)

llet me drive it, I'll get you those 12.80's

1TUF92Z

Marc wants the video against my 14 second run.

87tpi

iTrader: (5)

I'll post it in a minute, I have to resize it
It's over 100mb's waiting for you to cross the finish line.

3rdBird

iTrader: (1)

Heres some of my favorites.

3rdBird

iTrader: (1)

ok, so wheres the vid of me & Bennie racing?

87tpi

iTrader: (5)

That vid is still loading so it might be tomorrow that it gets posted. I started another thread with another one of you though.

kairles

iTrader: (2)

sunday I found out the guy that owns that red 2nd gen lives about 4 houses down from me. I would always see it in his garage on jack stands but never seen the front of it. small world

1TUF92Z

Okay. Next time we go out in the playground, it will be Firebird VS Camaro.

3rdBird

iTrader: (1)

Yea, Firebird -VS- Camaro. I'm thinking Del's car w/ some slicks,front runners, & a small shot of No2, will probably take it into the low 12's to 11's.

My 2nd bet would be, my car w/ the new TH400, 3000 stall, suspension tuned, tuned fuel pressure w/ No2,

Did I mention wind tunnel testing???

I'm thinking mid to low 12's

It just depends, cause I'm planning my 400ci small block as you read this!!![IMG]file:///C:/DOCUME%7E1/MARCFR%7E1/LOCALS%7E1/Temp/moz-screenshot-2.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/MARCFR%7E1/LOCALS%7E1/Temp/moz-screenshot-3.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/MARCFR%7E1/LOCALS%7E1/Temp/moz-screenshot-1.jpg[/IMG]

1TUF92Z

okay that's it! I'm going back in my garage.....later. Now where's that extra NOS kit I have.....hmmmm. No, not this 300HP direct port....oh here it is, a little dusty plate system. How bout 150.... hahaha

OUTATIME GTA

iTrader: (2)

I think slicks and a smaller blower pulley and I'm seeing low 12's.

Let's do this!

Bullydawg

iTrader: (7)

I wanna play. Let me get some NO2 and we can jump the camaro... haha

3rdBird

iTrader: (1)

Consider it done, R you sure you dont want to squirt it just a bit???

Believe it or not..since I'm a Goodyear dealer, I can get pretty good deals on Goodyear slicks, or even MT ET Streets!

OUTATIME GTA

iTrader: (2)

Was always tempted to "squirt" a little to act as an after-cooling effect, but there is still a lot of boost potential in the ProCharger that I can use before I blow up my motor, haha.

I'll have to think about the slicks and rims to go with them.
I was actually thinking of the MT ET Street Radial Drag Tires.
Give me an idea on a pair of 275/40/17 's when you're bored at the shop for a second.

3rdBird

iTrader: (1)

Gimme a call at the shop 315-0335. We'll find something for ya. I also have 2 Cragar front runners w/ tires. I'd let em go for a couple hundred.

TraviZ

iTrader: (2)

Hey marc, if I drop off my bypass valve and pipe next week, can you find a peice of 3" stainless pipe to tig it to? or should I provide the pipe as well?
I'm ready to get it welded now I can order my ecu as well.
After the car runs, I promise to bring it by for some welding/exhaust action!
Just don't sabotage the beast that will own you at the track

3rdBird

iTrader: (1)

Travis, if you bring the goodies, I'll fix it up.
Why do you need it Tig'd?
Is it structural?
BTW, I'm a professional, No sabotage, Racecars break on they're own.

TraviZ

iTrader: (2)

I just assumed tig'ing stainless is the thing to do, if mig welding looks good, works for me. I'll see if I can drop it off thursday when I bring that other car by..

vindeezl

iTrader: (2)

Mig will be easier / less expensive

Ramair21

iTrader: (3)

A stock LS1 with street tires. Let me get my slicks Del, then we shall go again LOL

(Watch Del kick my grass worse next time LOL)

3rdBird

iTrader: (1)

I'll mig it for next to nothing if its off the car

TraviZ

iTrader: (2)

Mig is fine.

Frank 84 Bird

With the Mig would you use steel wire or stainless? I'd assume the steel would start to rust fast. I'm not much of a welder just curious

TraviZ

iTrader: (2)

I didnt know there was a difference, I would think stainless, since my pipes are stainless?
----------
Even if not, I wanted to get this intake pipe ceramic coated anyways

3rdBird

iTrader: (1)

My welds looks robotic & hold stronger then the material I weld, just make sure, wherever I weld it...thats where you want it.

3rdBird

iTrader: (1)

Ok, so do I have to buy the video? Where is the vid of me & Bennie

1TUF92Z

There's was only an original copy and I bought it already and burnt it. LOL

87tpi

iTrader: (5)

Travis, what is your email again? Is it the same as before? I ca't get it to upload anywhere so I'll need you to do it.