1/8th to 1/4 conversion
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 77
Likes: 0
From: san diego
1/8th to 1/4 conversion
Hey I only got to take my camaro to qualcomm so its only an 1/8th mile course and they have bad traction, but what kind of 1/4 miles could I guess I could pull if I my best 1/8th was 10.1 @73 mph? mods are in my sig.
Supreme Member
Joined: Jul 1999
Posts: 1,593
Likes: 3
From: out of my mind; be back in 5 minutes....
Car: 1989 Firebird Formula
Engine: Internal Combustion
Transmission: Completed
Axle/Gears: ones that turn.
There are too many variables to make an 'exact' conversion, but a close estimate can be made by multiplying your 1/8 ET by 1.55. In your case, you would be looking at around a 15.65.
Your 60' time will have a huge effect on the speed at the end of the ¼.
Pete
Your 60' time will have a huge effect on the speed at the end of the ¼.
Pete
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 77
Likes: 0
From: san diego
sounds like I better work on getting my 60 foot down some, what kind of 60fts should I be getting? I dont have limited slip or any hardcore suspension mods other than my dropzone springs(not hardcore)
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
