Almost ready to put the motor back together..56k beware
Thread Starter
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Almost ready to put the motor back together..56k beware
Just got my heads back, they are ported to a 1206 gasket and i got my used but new to me cam and lifters. The cam is a 607 lift and 250@.050, soild roller. the lifters are Crower soild rollers. Got my new electric water pump and a mini starter. Tuesday i get my TH350, hooker long tubes and my 90/10 struts.
The heads are World Products, with CNC combustion cambers and 2.08 intake valves. Ferrea valves at that, that are ported very well. And if your wondering what those numbers are on the head, yes that is what they flow!!
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
edit: forgot to put the pic with the flow numbers in there.
mod edit: I tried everything to get them to display. I don't think putfile allows external links. Also did correct spelling of brand names.
The heads are World Products, with CNC combustion cambers and 2.08 intake valves. Ferrea valves at that, that are ported very well. And if your wondering what those numbers are on the head, yes that is what they flow!!
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
Putfile
edit: forgot to put the pic with the flow numbers in there.
mod edit: I tried everything to get them to display. I don't think putfile allows external links. Also did correct spelling of brand names.
Last edited by BT283; Jul 17, 2006 at 11:51 PM.
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
hmmm....it sounds very good, but the links to the pics are screwed up as all it says is something about Putfile.
Thread Starter
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
I dont know what the hell happened, but just click on all the links
Thread Starter
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Just wanna go in to the 6 sec range in the 1/8 mile with some gas on it. But i love my heads!!For the mod...thanks for the help, im not much of a speller, i just thought Crower had an L in it.
Moderator
Joined: Jul 1999
Posts: 17,271
Likes: 171
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Crower Cams & Equipment
Ferrea Racing Components
Those are well known racing components. I also just redid my heads. They originally had Ferrea valves but Manley valves were easier to pick up locally. I'd love some Crower Severe Duty roller lifters.
Ferrea Racing Components
Those are well known racing components. I also just redid my heads. They originally had Ferrea valves but Manley valves were easier to pick up locally. I'd love some Crower Severe Duty roller lifters.
Thread Starter
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Yea...i cant spell for crap...but my local machine shop carries Ferrea valves and Manley and some crap stock replacement
Thread
Thread Starter
Forum
Replies
Last Post
