Was noticing not too much going on in here from Oregon. Where ya at what do ya drive? Any auto cross or solo scca drivers and pics of car? Drag racers? Cruisers........... We have a great cruise here in July....... Some extra late nite Racing now and then (I do not partake in street racing). Lets let them know there are a few Gen 3's in the area!

 

Hey what's up... Down here in S. OR Just got my Iroc last year. My son and I done quite a bit of work on it. The 383 with 4:56 gears is a beast and fun the car looks completly stock until you fire it up. We went to the local cruise last summer 1971 and older crap it should be for rods not 1970 ford 4x4 junker pickups, I was embarassed to be there.

 

Im here in salem trying to srape in some extra money to build up my FireBird and i am always looking for things to do there needs to be a 3rd gen club around here

 

I agree but does not seem to be much interest. I understand the scraping up money part. I thought building the car was expensive, now not sure I can put fuel in it. lol

 

i know that specially since my firebird has a 700r4 trans in it and is missing 3-4th gear yippy i have to stay in down lol now thats a gas guzzler lmao for now
----------
buy the way wheres the cuise in at in July ??

 

Roseburg / Winston Graffiti night. Man I just Gave away A Good 700r cause I was tired of tripping over it. I took it Out Of my car to switch to 5 speed.

 

man that blows !!! lol how hard was that switch and what trans did you use for the manual ??

 

Hardest part so far is locating all the parts (For low Buck stuff) I found everything I need and was planning on doin install this weekend. I lucked out and found trans, pedals, Hydraulic slave and master cylinder $150, all but flywheel and clutch. Friend had light flywheeel so all is in the machine shop getting balanced this week. I am using the world class t-5. I also rebuilt motor with Crane Roller cam flat top pistons etc. I am planning on doing some scca type racing this year. Gutted whole car filled it up with roll bars a built a nice engine hope it all works out . lol

 

There are a lot of us in Oregon. Along with several clubs.

Ohh, snap. I hope I don't get banned for posting in here.

And, I'm from Portland. I have done some Auto-x'ing with the Oregon SCCA. A bunch of guys here (I use that in a loose sense) drag race at PIR.

 

Or work at PIR . There's a good amount of Oregon 3rd genners here. Not many of them post regularly though.

BTW I'm from Aloha, OR.

 

I'm in Yreka CA so I'm closer to Medford than I am Redding and points south. We're pretty secluded here.

 

i'd just like to thank you guys so much for the info i;m trying to fix up and build my car its kind of a roach no but thats for now i want to do the auto cross stuff to i want to build an all around car i'd love to find and join a club close to salem

 

Are you going to auto-x wiht Willamette Sports Cars? I have thought about going down there, to see how they run theirs, and how it compares with the SCCA stuff up here. But, I am working weekends now, so racing is sort of out for the time being.

 

Never heard of them yet i have a slight learning curve here i've lived out here for bout 3 years and have been trying to find clubs and other stuff like that to join so anyone out there listening shoot me some ideas

 

Yea there are a few clubs on here but we cant say our names online or fear of getting banned, I also belong to one of the largest clubs in the northwest, But most of our stuff is out of Washington.

You guys have several tracks with in several hundred miles of you.
PIR in portland
Woodburn in Woodburn Oregon
Bremerton Raceways in Washington (bremerton)
PR (OLD SIR) in Kent Washington


There is also several huge car shows that go on every year, The All Chevy & Camaro Show in Issaquah Wa is July 13th. Plus I do a few shows down south east of Olympia & in Olympia as well.


________________________________________________________________
Camaros: 71 RS Z/28, 87 Iroc-Z 350 700R4 Stock Best Run 14.686 1/4mile,89RS Vert 305, 95Zhawk

Others: 72 Buick Skylark Custom Vert, 99 Silverado K1500, 00 Corvette FRC

yea just a little car nut

2007 Charitable events director & South area rep
Pacific Northwest Camaro Club
Admin Pnwcc Forums
home page

 

dam that sucks heres my car somain paige i just set it up hit me up sometime maybe ypu guys can slip me some info
http://www.cardomain.com/ride/3033277

 

Hey guys I live in Winston just south of Roseburg. I am building my Hot Rod to race Auto cross and Hillclimb. I did a little in Alsaka but quit for a while. My buddy built a 89 corvette and we went to Willows California and Raced a track day at Thunder Hill Raceway. What a blast. I got the fever again and decided I had to build 1 more Car. I have had several camaro's in my life so I thought 1 more couldn't hurt. So now here I go again with an 88 Iroc that some young kid ratted out. It had one of those self installed hi perfomance stereo systems that caused a lot of interior damage. So I thought what the hey and took it all out and to the dump. By the way anyone need any power window or door lock motors? I took them out also. I then started fabing in a roll cage. I installed a adjustible pand hard bar ordered lowering springs and new shocks & struts. I rebuilt the 350 with flat top pistons Crane hyd. roller cam some good heads and a Victor Jr intake. On top of that I have a 750 Demon carb pertronics ignition and a msd 6 box. Since I removed all the interior (dash gauges etc) I decided on Autometer 2 5/8 gauges (cause I can't see the little guys lol.) I opted for the t-5 trans because I had one. I have a b&m shifter etc. I am currently in the middle of the auto to manual switch over. It has not been bad yet. But I am going to try and build my own adjustablr tourqe arm. We will see haow that goes. I have Kumo slicks on all 4 corners mounted on 17" Rally wheels I found laying around. I need to get a few more parts rounded up so I can finish. I will keep you in the loop if you are interested.

 

I'm in Klamath Falls, it would be nice to have a few people south of Portland.

I built a torque arm for my car a few years ago, if you need some help let me know.

 

Did you have any problems? I think for the $300 plus dollars I see them going for I can build a couple.

 

yeah im from keizer right by salem but im stationed in fort lewis washington now in the army i know a few guys around there who love third gens just like the rest of us

 

For those who want shows to do look at my sig.

 

I have an 83 Camaro that I buy parts off craigslist for. Thats the best place ever, except this site of course
----------
Im from Battle Ground. WHOOP WHOOP!!!!!!!!!

 

Yeah, I'm in Oregon too, specifically Springfield.
I have a '85 Trans Am that's all messed up right now, but it will be fixed before summer is out!

I've noticed there aren't many Oregonians here on thirdgen. It makes me sad, because I see at least 3 third gens a day.

It'd be cool to find a good club near the Eugene area. I don't think I can drive up to Portland often enough with gas at $4.20\gal.

 

Hav'nt posted here for a while how did the summer go for you guys? I did not finish my hot rod this year maybe next year. I am going racing none the less. The fuel prices and a new ruling on child support put me in the rears on race car project LOL. Oh well thread died out so I thought I would try and spark it up again. any takers?

 

I'm down to spark it ALWAYS!!! From Battle Ground.


---------------- Now playing: Hank Williams, Jr. - Cadillac ***** via FoxyTunes

[IMG]file:///C:/DOCUME%7E1/Owner/LOCALS%7E1/Temp/moz-screenshot-3.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/Owner/LOCALS%7E1/Temp/moz-screenshot-4.jpg[/IMG]

 

Bend Oregon represent!

 

Hey Bend... Gresham /Troutdale here with a showroom clean 1983 Pontiac TransAm in my garage under the car cover, looking to cruise with some other chevy and pontiac fans

 

Hey, I'm at Rhododendron, on Mt. Hood! I got my '88 Camaro T-top in end of June. I'm Amazed at how well it does in crappy weather!

 

They seem to be a whole lotta fun in any weather!

 

Im here in Tillamook and just got my 3rd gen its been sitting behind a local business for about 4 to 5 years so its rough but wont be for longIve seen other 3rd gens here in various stages so I know there are out there mine is ab 85 trans am soon to have a 355

 

Cool I like the TA but am a camro guy all the way. wish I still had some of the old ones 67 RS SS, 70 and a few other third gens. I had the cross fire version in 90 not too happy bout that one.

 

Howdy Yalls from saint helens oregon, I am working on a 91 Camaro RS which I just got the 3.1 FI v6 which needs work pulled out and I am going to put in a SBC 350 4 bolt main with 700R4. So its still not on the road just yet but hopefully will figure out some minor snags Im running into. I brought the car home on 8/25/2008 and got it with the SBC motor for a steal.

 

I am in North Albany, and this is my first post to the site. Hopefully if I did everything right there will be a picture of my '92

 

yes there is a picture of your car so ya did it right.

 

Hey guys - greetz from Southern Oregon (Medford)!

I have an '88 Sport Coupe that I am rebuilding. I have an '89 IROC as my parts car.

See my build-up journal here:
https://www.thirdgen.org/forums/engi...al-n00bie.html

A good friend of mine (and one who is playing a big role in my rebuild) is the President of Siskiyou Sports Car Club (SSCC) so I will be doing some autocross here. Maybe some drag racing...who knows...

 

Hello from Tigard,OR. I've had my Third Gen for about 14 months now. I'll never figure out why I didn't get one of these cars sooner!!
Just got done rebuilding suspension with poly bushings. Wonder bar up front. New B&M shifter. Cold air intake. etc.....
Still a work in progress but what a blast to drive!! Maybe I'll see some of you out at PIR when the sun finally decides to shine!!

 

Hey there. Quite a few thirdgenners in the Portland/Vancouver metro area. We will be having a dyno day in Lake Oswego February 21 (8th annual!). Not sure if I am allowed to post up the info so send me a private message if you would like to meet up/get introduced.

-Schultzy

 

Glad to see the thread still lives. I hope to go to PIR for a track day this year. Geetin the itch to run he ol girl. Anyway cool that you are all out there keep up the post!

 

That would be great if you came out to PIR. If and when you decide to come out shoot me a PM. I am a Tech Inspector for the drag strip and it's always great to meet new third gen enthusiasts.

 

Yea we are into raod coures now but a few passes down the straight line may be fun.

 

I'd love to take the old girl out on the twisties. Not much fun to put in a new suspension just to have her drive straight!! lol
Have a great day everyone and hopefully I'll meet some of you at the tracks!!

 

Is this place that locked down that in the local forums we can't post about local gatherings?

 

I am from Battle Ground and have no Camaro any longer.....BUT.. I do have this!!!

 

This looks as good a place as any for a first post. I don't have a 3rd Gen, sorry. What I do have is an Isuzu Trooper with a 3.4L SFI engine swapped into it. And I'm in Hood River, OR.

Been driving it about a year with the 3.4L, but I'm about to tear into it again for some upgrades and bug fixes. Came here to beg parts and advice.

 

All you guys are on the green side of the state. I'm over here in Vale, almost Idaho, on potato time, yea there is another time zone in oregon. You guys have the mountain roads, we have some middle of nowhere straight aways that lead you into oh**** curves.

88 v6(for now) coupe with a few upgrades. Just starting out.

 

Vale huh? My high school auto teacher used to teach at a high school out there. everyone starts out with something, stick with it!

 

Yea, between my two one hundred dollar cars I should get the good one in great shape.

Where did he teach? I know the instructor from Vale and his instructor from Nyssa who now lives in Vale. I met the Ontario guy once but wouldn't recognize him on the street.

 

I'm in Salem, OR

 

hey Salem how are ya? Cruiser or racer? welcome aboard.

 

just a cruiser, trying to fix her up little by little