Make an offer, but please dont insult me. . .
If interested, I need:
Name/ Part Description and price/ zip code and city of residence.

1227165 ecm,
camaro power mirror switch,
2- Power door lock switches,
Plastic covers for seat to floor mounts,
L- shaped fuse panel cover,
screw-type fuse panel cover,
Top-center button automatic shifter ****,
4"x2" vent
2- 4"x1.5" vents
black outter gauge cover for 87' style gauges
2- Plastic bristle cover for power hatch motors
2- interior light covers for t-top and hard top
7- tan/brown plastic interior trim screws
Dash pad defroster vents
4- Grey plastic interior trim screws
Firebird foglamp switch and panel
2- white color camaro hvac center
yellow color camaro hvac center
firebird hvac center
Camaro "Iroc-Z" bumper cover/BRA
Grey 3A racing bench seat cover
Black leather cargo cover with mounting tabs
Black door sills for both sides
stock panhard rod arm
dual fan shroud upper support
camaro 305/350 custom dual snorkle air cleaner
14"x5" K&N air filter
Speaker wire to RCA cable output converter
Firebird headlight switch
1995 camaro fog light switch
1995 interior lights dimmer
1995 camaro turn stlye headlight switch
camaro taillight wiring harness
1987 camaro z28 taillights
Guide for pontiac flip-up headlamps
Blower speed resistor set
MAP sensor
Power window switch
Power door lock actuators ( both sides)
k-9 alarm system
TBI Transmission cable
2- 730' ecm
730' pigtail connectors
18" long x 3.5" chrome exhaust tips with minor surface rust
Monster cable patch cables ( 2 and 4 wire setup)
Power cable 8 ga.
Power cable 4 ga.
Monster cable power dist. block (1 to 4)
Autometer 2" fuel pressure gauge
Fuel pressure sending unit
2 1/16" air/fuel ratio gauges
MSD 6AL control box ( internal short, but is fixable by dealer)
MTX 4244 digital amplifier (60rmsx4 or 120rmsx2)
EGR temp enable switch
Full set of good condition grey seat belts (over shoulder stlye)
MSD Blaster Coil (has around 20k on it)
2- cold start injectors
lighted rear view mirror
2- rear sway bar ( not 1LE)
1- hollow front sway bar ( not 1LE)
Auto shifter assembly
plunger/actuator for brakes
3- power window regualtors ( not sure of condition of motors)
Stock torque arm
2-black camaro arm rests
2-camaro radio surronds
firebird center counsole ( slightly warped from sun, also has heat crack in the armrest pad)
14- 19# fuel injectors
1986-up 305/350 flywheel (manual trans)
1986-up 305/350 flexplate (auto Trans)
1985-pre flexplate
350 L98 cam with 110k on it
Very new rear drum set. (drums, shoes, hardware, cylinders)
Driver's side spindle
3" exhaust cut-out
grey door sills ( both sides )
aluminum 15" camaro rims
2- goodyear eagle gs-c tires w/ about 40-50% (245/50r16)
1987 IROC-Z hood


I have more misc. parts, but not enough room. Pm me with any other requests. Thanks, Andy

Also visit: 1989 formula $900 obo at:
https://www.thirdgen.org/techbb2/sho...hreadid=315711

 

I was wondering if these were the yellow print switches/controls? If so, could you please e-mail me the pics of all that stuff for the interior to jon.jensen2@us.army.mil Thanks a bunch!

 

I PMed you about your fuel injectors.

 

how much for air cleaner?

 

what is this Speaker wire to RCA cable output converter
your talkin about??? and how good of condition is the blaster coil and is it a straight stock replacement for the stock 91 305 tbi coil??like will it fit in the same spot and everything? and what about the mtx 60x4 amp what r u wanting on it?

 

Black leather cargo cover with mounting tabs-
Is this the shade?
Can i see pics?
How much?

 

rrat what are you looking for a tbi or tpi air cleaner im in lexington if you need the tbi and something dosent work out w/ camar92 its the stock tbi air cleaner w/ out temp sensor but it does have a brand new k&n air filter in it w/ less than 5000 miles its still got the oily surface on it but i dont wanna high jack his thread so pm me if it doesnt work out.

 

Yes the yellow controls that came on the 1992 camaro and alittle older ones. I have the defroster switch, heating, vent, a/c control center, and a gauge pod with 134064 miles on odometer. All three are in really good shape. Unfortunatly I cant find my cable for digital camera, so I cant currently take any pictures. The yellow is still good and has no fade marks on it. HVAC is alittle worn, but only from age and cant be noticed (needs to be cleaned very well). PM me if your still interested.
Thanks and have a good day.
Andy

 

If you are talking about the stock tbi with the custom dual snorkle on it, you can have it for $15 plus shipping. Its in great shape and has the stock air cleaner still intack. A/F is still good also.
Let me know and I can give you a shipping quote

 

The converter is a module that converts regular sound signal from a conventional speaker wire into a signal that is passed though a rca or patch cable. So basically it gives the stock radio a set out rca outputs. The blaster coil worked good when I took it off, but I cant rember for sure. I hate to sell something that doesnt work, so that will be free of charge. The amp was only used for 6 months and was stored after that, is in mint condition and am asking $50 for that. The convertor is for sale for $5. No prices above include shipping, so if your interested, let me know and I can figure it out. Oh, and yes the blaster coil takes the place of the stock 305 coil.

 

Yes this is the shade that covers the rear section when the hatch is closed. The bad thing is that My camera cable is missing, so I cant take pictures yet. It is in great condition, with no tears. Is alittle faded, but with age, this is expected. Has the plastic covers for the sides still also. If you want the shade, I will sell it for $30 plus shipping. PM me if your still interested and we can go from there.

Thanks and have a good day.
Andy

 

How Much for the K&N air filter.

Thanks, Josh

 

so your saying that the converter takes a speaker wire in and makes an rca out if so ill take it for 5 dollars and the blaster coil too if its free let me know shipping to lexington ky 40515 and itll be awhile if i was gonna get the amp cause im low on funds right now....but yeah let me know the total w/ shipping and your paypal account.

 

How much for the 1227165 ecm?

 

$10 for shipping so all together comes out to $15.

Paypal is fine but I do charge $2 ( depends on cost sent through paypal) extra. So it will be $17. Thanks and let me know.

Andy

 

$13 plus shipping.

If interested, let me know your zip code and city and I will quote you a price on shipping.

Thanks,
Andy

 

The air filter may be sold,
If not $15 plus shipping is what Im asking for it.

I will pm you later tonight and let you know.
Thanks,
Andy

 

can u please explain a lil more what this converter for the speaker wire/rca does....and also is that 17 dollar quote for me shipped w/ the blaster coil too....did u say u didnt think it worked?

 

justlearning I am pretty sure that if you don't know what it is after that explanation, just leave the audio stuff to us aahhh just kiddin man. A simple explanation, if I may camaro92, is in one side, the input side, will go your speaker wires from your stereo. Then on the other end, the output will be in the form of RCA cables. This allows you to hook up an amp, per say, by using a stereo that otherwise does not have RCA outputs on the rear of the deck.

 

How much for the flywhell & shipping to 50321. Do you have any pics?

 

are they still available
and what do u want for them plus shippin to 52627 south east iowa, thanks

 

Whatcha gettin fer da MSD 6AL control box ? What is the shipping to 97504, OR. Thanks, Ed.

 

Yes I believe the coil still works perfect, I took it off when I did my 350 swap and bought all new ignition parts. You are correct about the convertor. It takes a normal speaker wire and converts it to a rca cable.

And Yes the $17 is for the blaster coil and convertor shipped,
Like I said, everything is very cheap.

 

Thank you,

Some times I can over analyze things and even confuse myself!

 

The flywheel is $40+$20 shipped and if you want paypal then it is a %10 fee. pm me if you want it and I will let you know.

Here is a picture of the flywheel, surface is good, no hot spots, just really dirty from sitting for 6 years.

Thanks,

Andy

 

$10 for tips,+$15 shipped+ 10% paypal fee=27.50

These tips brand new are $30 a piece.

Thanks and have a good day,
Andy

 

$25 for MSD box+ $21 shipping + %10 paypal fee (if using)=$50.60 ($46 if money order or cashier's check)

Thanks and let me know,
Andy

 

how much for 1 of the '730 ecm's and the '730 pigtails shipped?

 

okay then i want the coil and the convertor for sure just had to double check the discription cause i didnt know there was such a thing and yes 92 i dont take it personal everyone learns somethin knew sometimes but i have an mtx 81000 d amp and three mtx 8000 12s and a 5 farad cap....plus of course two amps im bout to run my mids and highs w/ and an old orion eq...but if u got any pics of the tips and the brand possibly i may take them too. oh and is it a 2.5 inch in or what a lil more info on those please so i can figure if i want them before i get the other stuff. and its comming to 3369 mt.foraker lexington ky 40515

i meant 2.5 inch inlet thats what i have dual 2.5 inch pipes from the muffler

thanx

 

I have one that has a dip socket installed ( socket used for installing zif sockets) and one that has stock memcal with chip. They are both $15 w/o shipping.If you want to know shipping, let me know your city and zip, and I can let you know.
Thanks
Andy

 

The tips are for 2" to a 2.5" inlet. Im not sure who makes them, because It wasnt too important to me at the time, I know that they were $60 for both though! They are in good shape, and hopefully sometime soon I can get a picture of them. Ill have to get bck with you on shipping, I need to go to bed. Work 13 hours starting 6 hours from now.
Thanks
Andy

 

What about the ecm pigtail connectors, the city is Denison, TX 75020!

 

Hi, do you still have the door lock buttons for sale? Do they work? and do they have good"pictures" on the, also need a powerwindow switch and a hatch release button

 

the hatch button,window switch, and door lock buttons are already sold. sorry
Thanks
Andy

 

shade picture.
The white dot on it is not on the shade.
The white dot was my dirty lense on the camera.
Sorry about that. As far as any fad, I thought there was a fade to it, but I was thinking of my cloth one. This one has no fade to it.

 

Those are free, with the ecm.
Shipping is$12+$15 for ecm= $27. If your a paypal user, add 10% for the paypal fee I get charged for for using it.
Thanks,
Andy

 

1987 iroc-z hood pic1

 

Iroc-z hood pic2

 

do you have any yellow lettered power door lock switches?

 

Re: ecm

quote:
--------------------------------------------------------------------------------
Originally posted by tango1112
How much for the 1227165 ecm?
--------------------------------------------------------------------------------

The zip code is 28083.. Let me know a total and I'll send it via paypal.
my paypal email is michael@silvereagleenterprises.com
Thanks,
Mike

 

what about pics of the exaust tips?? cause like i said i deff. want the other two things i talked about but i wanted to see the pics of those to see if i want those or some tips from another guy. thanks

 

u out there man??? still very interested in convertor and coil just waiting on pics of the exaust tips to see if i want those too??

 

Yes im still here, I was out of town this weekend.
Here is the picture of the tips.

 

tpi snorkle pic 1

 

tpi snorkle pic2

 

the grey spot on the snorkle lid is a old id sticker that faded away, even though it looks like something else! The dual snorkle setup is in perfect condition, I promise!

 

tbi dual snorkle pic1

 

tbi dual snorkle pic2

 

man sorry to keep buggin u but i just hate to pay shipping twice if i plan to get these tips too i cant tell from the pic the rust u were talkin about if u could take a pic a lil closer up but if its a big deal ill just stick to the converter and coil assuming u still have both of em. is there any way u can wait till thursday cause thats when i get paid and gas keeps goin up so id like to try and stretch the money in my wallet till then if not i guess i can go ahead it would just make it easier for me if u could please wait till thursday when i get paid but those to are for sure sold either way cause i need the convertor to run extra amps for my mids and highs w/ my eq....oh and it dosent effect the purchase but would that converter happen to be for two sets of rca outs or just one?? thanks

 

how much for the headers and y pipe thanks