Random parts needed
Thread Starter
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Random parts needed
Okay, now that the flywheel is arriving tomorrow, I need the following ASAP:
T-5 torque arm mount (the one I have is worn out and bent) with bolts, please. The bolts that I have were broken by the guy who removed the trans from the donor car at the yard...
T-5 VSS retainer from an 87 Firebird (no speedo cable crap, please). This is the bracket that fits into the slot on the VSS to hold it in place. Also need the bolt.
Firebird gauge cluster lens. Just the lens, and it MUST be from a gauge cluster, as the ones from the idiot light cluster are not the same.
T-5 torque arm mount (the one I have is worn out and bent) with bolts, please. The bolts that I have were broken by the guy who removed the trans from the donor car at the yard...
T-5 VSS retainer from an 87 Firebird (no speedo cable crap, please). This is the bracket that fits into the slot on the VSS to hold it in place. Also need the bolt.
Firebird gauge cluster lens. Just the lens, and it MUST be from a gauge cluster, as the ones from the idiot light cluster are not the same.
Thread Starter
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Don't need the torque arm bracket anymore. Going to pay for a NEW one Tuesday. Don't need the VSS retainer anymore, made one myself.
Still need the instrument cluster lens...
May need a T-5 VSS with the light blue speedo gear attached, if GM no longer has one, or just the gear if it can be removed.
Still need the instrument cluster lens...
May need a T-5 VSS with the light blue speedo gear attached, if GM no longer has one, or just the gear if it can be removed.
Thread
Thread Starter
Forum
Replies
Last Post