Ultimate Blower Longblock
Thread Starter
Junior Member
Joined: Oct 2001
Posts: 51
Likes: 0
From: Waukesha
Ultimate Blower Longblock
What do you think would be the ultimate blower longblock?
I know for shizzle I want to run a superram for intake and I want to keep the compression at 8.5:1 for a 383 stroker.
What internals do you think I should run, and what heads? Think we can keep it below $5000 (not including superram or blower)?
-Nickerz :hail:
I know for shizzle I want to run a superram for intake and I want to keep the compression at 8.5:1 for a 383 stroker.
What internals do you think I should run, and what heads? Think we can keep it below $5000 (not including superram or blower)?
-Nickerz :hail:
Thread Starter
Junior Member
Joined: Oct 2001
Posts: 51
Likes: 0
From: Waukesha
heres what im thinking so far
400 destroked to 350 with 6.25" rods
http://www.speedomotive.com/400_w.htm
all forged extras (blower pistons)
and afr 227cc competition with 76cc chambers.
http://www.airflowresearch.com/pages/227sbc_rh.htm
the last article I saw on a the 400 combo they ran it at full timing on 87 octane knock free. With lower compression I should be able to run 17psi or more of intercooled boost.
MONSTER!
whatyathink I should run for bottom end parts?
400 destroked to 350 with 6.25" rods
http://www.speedomotive.com/400_w.htm
all forged extras (blower pistons)
and afr 227cc competition with 76cc chambers.
http://www.airflowresearch.com/pages/227sbc_rh.htm
the last article I saw on a the 400 combo they ran it at full timing on 87 octane knock free. With lower compression I should be able to run 17psi or more of intercooled boost.
MONSTER!
whatyathink I should run for bottom end parts?
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
Nov 10, 2015 04:07 PM
buckeyecelt
Tech / General Engine
3
Sep 24, 2015 05:50 AM
