NX Hitman kit??
Thread Starter
Member
Joined: Dec 2001
Posts: 160
Likes: 0
From: webster ny
Car: 1987 IROC-Z
Engine: Carbed 355
Transmission: TH-350
NX Hitman kit??
I've pretty much decided to go with nitrous. Now I have heard the best about NOS and NX, because of the quality of there kits. And after reading around the internet and on this board NX seems to get the most praise for there system. Ive seen two kits, the Hitman and the Hitman Plus. What i am wondering is, is the Hitman plus worth the extra $90+? What else except for the extra jet setting is included with the Hitman Plus. Also can the regular hitman be upgraded to the hitman plus settings?
Joined: Oct 2000
Posts: 2,112
Likes: 0
From: Orange County,NY
Car: 1982 Z28
Engine: 355
Transmission: T56
Axle/Gears: 12 Bolt
The Hitman Plus comes with a nitrous filter,relay and harness,WOT switch,and the jets to go from 50-200 as opposed to the 100-200 shot of the Hitman system.Worth the $90 extra..IMO yeah if you have it.You will end up buying these added pieces anyway if you plan to install it right.Only part I didn't use was the WOT switch..bought the Competition Motorsports one for my Demon from Summit for $30.The only upgrade you need to do to make it a Hitman plus is get jets that spray a 50 shot which I have yet to install...who sprays 50hp on a V8..get a set!!lol.It can be upgraded at a later point to spray from 50-300 with the new Ice man juice noid and plate for around $300..I am going that route this winter.
Thread Starter
Member
Joined: Dec 2001
Posts: 160
Likes: 0
From: webster ny
Car: 1987 IROC-Z
Engine: Carbed 355
Transmission: TH-350
Thanks...also how did the installation go??? was it hard or pretty easy...also where could i get the Hitman Plus for the best price...thanks for the help
Joined: Oct 2000
Posts: 2,112
Likes: 0
From: Orange County,NY
Car: 1982 Z28
Engine: 355
Transmission: T56
Axle/Gears: 12 Bolt
Install was fairly easy.Hardest part was mounting the solenoids as I chose to mount them differently from how NX suggested.I fabricated some brackets to mount the noids seperately on each side of the carb.I actually am in the process of remaking the mounts as I am not the happiest with my first go round..much happier with the new setup.Will post pics if I ever get time to finish them..dam work and kids
.The rest of the install is simple...mount bottle..wire it up(with relay)..and go!As far as best price...search in the vendor review section of the board for links.I bought my kit at a NMRA event a few years back when I was on vacation for $460 event sale price from John Phillips 888-289-6261.
.The rest of the install is simple...mount bottle..wire it up(with relay)..and go!As far as best price...search in the vendor review section of the board for links.I bought my kit at a NMRA event a few years back when I was on vacation for $460 event sale price from John Phillips 888-289-6261. Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
7
Feb 8, 2017 03:09 PM
1Aauto
Sponsored Vendors
1
Jan 15, 2016 06:26 AM
1Aauto
Sponsored Vendors
1
Jan 15, 2016 06:25 AM
1Aauto
Sponsored Vendors
0
Sep 2, 2015 01:35 PM






