Best place to get an ATI?
Best place to get an ATI?
Where is the best place to purchase and ATI for the best price complete ATI procharger? Also, I noticed that one place sells the D~ISC as a unit that produces 9-12psi and another that produces 15-20psi. Is that the same charger with a smaller pulley and larger aftercooler? Otherwords, can I later upgrade to a smaller pulley and larger aftercooler to get 15-20psi?
Thanks!
Thanks!
Last edited by Raiden; Dec 5, 2003 at 05:53 PM.
check out www.tenperf.com Tenacious performance is there name. Your customer service will be outstanding, and i'm not sure about your other question..... what model of S/C does the other kit use?
Josh
Josh
I have to agree with 87transam5.7tpi - deal with Dave at Tenacious Performance. I've spoke with him on a number of occasions and he's always been more than helpful.
Regarding your other questions, start with reading through the FAQ section on www.tenperf.com and ATI's site http://www.procharger.com/faq.shtml.
Regarding your other questions, start with reading through the FAQ section on www.tenperf.com and ATI's site http://www.procharger.com/faq.shtml.
Last edited by Dr G; Dec 8, 2003 at 04:20 PM.
Supreme Member
Joined: Oct 2000
Posts: 1,780
Likes: 0
From: Warner Robins, Ga
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
If your interested a friend of mine is selling a D1-R less than a year on the compressor. Mondo Blowoff valve, D1-R blower with polished housing, all brackets, two pullies, two carb hats, and rather Large Spearco intercooler that's been modified with larger tanks. Should allow up to 1000 horsepower, blower is rated at 1100 or 1200 I believe.
It ran 9.16s at 148 in a 3300lb car, and he drives it around town on pump gas.
If your interested, call 478-256-8732 ask for Brian. He needs to get rid of asap, he's going to single turbo and air to water intercooler.
It ran 9.16s at 148 in a 3300lb car, and he drives it around town on pump gas.
If your interested, call 478-256-8732 ask for Brian. He needs to get rid of asap, he's going to single turbo and air to water intercooler.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM





